• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.90-101
• /
• 2004

An inverse mosaic method has been proposed to generate an initial blank shape from the final product shape. Differently from the geometric mapping method, the method can handle triangular patches. However, the generated blank shape is strongly dependent on the order of determination of nodes. In order to compensate the dependency error smoothing technique has been also developed. Although the accuracy has been improved greatly compared with the geometrical mapping method, the method has limitation, due to the no incorporation of plasticity theory. Even though the accuracy of the radius vector method is already proved. the method requires initial guess to start the method. In order to compromise the limitation of the present method and the radius vector method, the method has been connected to the radius vector method. The efficiency of the present optimal blank design method has been verified with some chosen examples.

• Transactions of Materials Processing
• /
• v.24 no.1
• /
• pp.28-36
• /
• 2015

After a short review of the iterative optimal blank method, a new method of measuring the shape error for stamped parts with 3D contour lines, which is an essential component of the optimal blank design, is proposed. When the contour line of the target shape does not exist in a plane, but exists in 3D space, especially when the shape of the target contour line is very complicated as in the real automotive parts, then the measurement of the shape error is critical. In the current study, a method of shape error measurement based on the minimum distance is suggested as an evolution of the radius vector method. With the proposed method, the optimal blank shapes of real automotive parts were found and compared to the results of the radius vector method. From the current investigation the new method is found to resolve the issues with the radius vector method.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.93-96
• /
• 2005

We propose a computationally efficient sphere decoding (SD) algorithm with smart radius control (SRC). As a baseline algorithm for SD, we consider the modified Schnorr-Euchner (SE) algorithm [1] (hereafter, called as the MSE algorithm). In principle, the radius after zero-forcing decision feedback equalization (ZF-DFE) estimation can be reduced further if we select a new lattice vector closer to the received signal vector than the lattice vector corresponding to the ZF-DFE estimate does. In our case, we obtain such a better lattice vector by performing a sequence of alternating one-dimensional searches, starting from the ZF-DFE estimate. We then develop a novel SRC algorithm that adopts adaptively the additional radius reduction process according to the estimated signal-to-noise-power ratio (SNR) after ZF-DFE estimation. In addition, we analyze the effect of detection ordering on the complexity for SD. Column-norm ordering of the channel matrix and optimal ordering [1] are considered here. From our analyses, we see that SRC can reduce greatly the complexity for SD and the degree of complexity reduction gets significant as the SNR decreases, irrespective of detection ordering schemes used.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.276-276
• /
• 2000

This paper presents the efficient algorithms for the pose determination of a circular object with and without a priori knowledge of the object radius. The developed algorithms valid for a circular object are the result of the elaboration of Ma's work [2], which determines the pose of a conic object from two perspective views. First, the geometric constraint of a circular object and its projection on the image plane of a camera is described. The number of perspective views required for the object pose determination with and without a priori knowledge of the object radius is also discussed. Second, with a priori knowledge of the object radius, the pose of a circular object is determined from a single perspective view. The object pose information, expressed by two surface normal vectors and one position vector, is given in a closed form and with no ambiguity. Third, without a priori knowledge of the object radius, the pose of a circular object is determined from two perspective views. While the surface normal vectors are obtained from the first view, the position vector is obtained from the two views.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.74-86
• /
• 2014

The optimization techniques are explored in the direction of arrival (DOA) estimation based on single acoustic pressure gradient vector sensor (APGVS). By analyzing the working principle and measurement errors of the APGVS, acoustic intensity approaches (AI) and the minimum variance distortionless response beamforming approach based on single APGVS (VMVDR) are deduced. The radius to wavelength ratio of the APGVS must be not bigger than 0.1 in the actual application, otherwise its DOA estimation performance will degrade significantly. To improve the robustness and estimation performance of the DOA estimation approaches based on single APGVS, two modified processing approaches based on single APGVS are presented. Simulation and lake trial results indicate that the performance of the modified approaches based on single APGVS are better than AI and VMVDR approaches based on single APGVS when the radius to wavelength ratio is not bigger than 0.1, and the two modified DOA estimation methods have excellent estimation performance when the radius to wavelength ratio is bigger than 0.1.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.93-105
• /
• 2001

In the lossless step of Lattice Vector Quantization(LVQ), the lattice codewords produced at quantization step are enumerated into radius sequence and index sequence. The radius sequence is run-length coded and then entropy coded, and the index sequence is represented by fixed length binary bits. As bit rate increases, the index bit linearly increases and deteriorates the coding performances. To reduce the index bits across the wide range of bit rates, we developed a novel lattice enumeration algorithm adopting the set partitioning method. The proposed enumeration method shifts down large index values to smaller ones and so reduces the index bits. When the proposed lossless coding scheme is applied to a wavelet based image coding, the proposed scheme achieves more than 10% at bit rates higher than 0.3 bits/pixel over the conventional lossless coding method, and yields more improvement as bit rate becomes higher.

• Journal of information and communication convergence engineering
• /
• v.9 no.6
• /
• pp.637-640
• /
• 2011

The hybrid neural networks have characteristics such as fast learning times, generality, and simplicity, and are mainly used to classify learning data and to model non-linear systems. The middle layer of a hybrid neural network clusters the learning vectors by grouping homogenous vectors in the same cluster. In the clustering procedure, the homogeneity between learning vectors is represented as the distance between the vectors. Therefore, if the distances between a learning vector and all vectors in a cluster are smaller than a given constant radius, the learning vector is added to the cluster. However, the usage of a constant radius in clustering is the primary source of errors and therefore decreases the recognition success rate. To improve the recognition success rate, we proposed the enhanced hybrid network that organizes the middle layer effectively by using the enhanced ART1 network adjusting the vigilance parameter dynamically according to the similarity between patterns. The results of experiments on a large number of calling card images showed that the proposed algorithm greatly improves the character extraction and recognition compared with conventional recognition algorithms.

• Journal of Astronomy and Space Sciences
• /
• v.3 no.1
• /
• pp.15-27
• /
• 1986

Variation of radius vector was computed by Cowell's method. Perturbations due to the Sun, moon, and earth's asymmetrical potential are considered. We summarize our results as follows : I) $J_2$ term does not affect the equatorial orbit. ii) Large perturbation and secular variation on the above orbit are caused by tesseral harmonics. iii) The other perturbations have small effect and periodicity.

• Transactions of Materials Processing
• /
• v.12 no.7
• /
• pp.615-622
• /
• 2003

In the automobile industry, the design of optimal blank shape becomes a significant part of the stamping. It provides many evident advantages, sush as enhancement of formability, reduction of material cost and product development period. However, the nesting process, required for the optimal usage of materials in the blanking becomes more complicated as the blank shape becomes complicated, like most optimal blank shape. In this study, stamping process optimization system for the optimal usage of material has been developed through the integration of optimal blank design and optimal nesting. For optimal blank design, a radius vector method, the modified version of the initial nodal velocity method, the past work of the present author, have been proposed. Both the optimal blank design and optimal nesting programs have been developed under the GUI environment for the convenience of engineers. The efficiency of the optimization system has been verified with some chosen problems.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.27-30
• /
• 1999

A spatio-temporal vector channel model is introduced for the position location (PL) estimation problem for CDMA cellular system environment. Two common ways for the PL make use of the AOA (Angle Of Arrival) and TDOA (Time Difference Of Arrival) from a subscriber to the multiple sensors (base stations). In this paper, we applied the derived vector channel to simulate the multipath channel for the angle of the signal arrival in CDMA systems. Cross-correlation method is a good candidate among other direction finding algorithms available in literature, especially in wideband modulation as in the CDMA system. The PL estimation errors are evaluated for different channels, which are obtained as a parameter of scattering radius of the suggested model. We noted that the number of sensors (base-stations) are related to the PL errors in favor of the available data.