• Restorative Dentistry and Endodontics
• /
• 제46권3호
• /
• pp.43.1-43.9
• /
• 2021

Objectives: This study aimed to evaluate the detection rate of apical radiolucencies in 2-dimensional images using cone-beam computed tomography (CBCT) as the reference standard, and to determine which factors related to the apical radiolucencies and the teeth could influence its detection. Materials and Methods: The sample consisted of exams of patients who had panoramic (PAN) and/or periapical (PERI) radiography and CBCT. The exams were assessed by 2 oral radiologists and divided into PAN+CBCT (227 teeth-285 roots) and PERI+CBCT (94 teeth-115 roots). Radiographic images were evaluated for the presence of apical radiolucency, while CBCT images were assessed for presence, size, location, and involvement of the cortical bone (thinning, expansion, and destruction). Diagnostic values were obtained for PERI and PAN. Results: PERI and PAN presented high accuracy (0.83 and 0.77, respectively) and specificity (0.89 and 0.91, respectively), but low sensitivity, especially for PAN (0.40 vs. 0.65 of PERI). The size of the apical radiolucency was positively correlated with its detection in PERI and PAN (p < 0.001). For PAN, apical radiolucencies were 3.93 times more frequently detected when related to single-rooted teeth (p = 0.038). The other factors did not influence apical radiolucency detection (p > 0.05). Conclusions: PERI presents slightly better accuracy than PAN for the detection of apical radiolucency. The size is the only factor related to radiolucency that influences its detection, for both radiographic exams. For PAN, apical radiolucency is most often detected in single-rooted teeth.

• Imaging Science in Dentistry
• /
• 제43권4호
• /
• pp.295-301
• /
• 2013

The author experienced 8 cases of pericoronal radiolucency involving an incomplete tooth crown that had not developed to form the cemento-enamel junction, and the underdeveloped crown sometimes appeared to be floating within the radiolucency radiographically. The first impression was that these cystic lesions had odontogenic keratocysts, but half of them turned out to be dentigerous cysts histopathologically. There has been no report concerning odontogenic cysts involving an incompletely developed crown. The purpose of this paper is to report that dentigerous cysts may develop before the completion of the cemento-enamel junction of a developing crown.

• Imaging Science in Dentistry
• /
• 제42권4호
• /
• pp.261-263
• /
• 2012

Developmental salivary gland defect is a bone depression on the lingual surface of the mandible containing salivary gland or fatty soft tissue. The most common location is within the submandibular gland fossa and often close to the inferior border of the mandible. This defect is asymptomatic and generally discovered only incidentally during radiographic examination of the area. This defect also appears as a well-defined, corticated, unilocular radiolucency below the mandibular canal. Although it is not uncommon for this defect to appear as a round or ovoid radiolucency, multilocular radiolucency of these defects is relatively rare. This report presents a case of a developmental salivary gland defect with multilocular radiolucency in a male patient.

• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.210-214
• /
• 2014

Objectives: To investigate the prevalence of different primary reasons for endodontic referrals and the clinical symptoms of the referred cases. Materials and Methods: Clinical data of total endodontic treatment cases (1,014 teeth) including endodontic referral cases (224 teeth) between January 1, 2010 and December 31, 2012, at Kangdong Sacred Heart Hospital, were investigated retrospectively. The one major reason for referral, the clinical symptoms, and the resulting treatment procedures of referral cases were recorded. The percentages of clinical symptoms of the endodontic referral cases and the total endodontic treatment cases were compared by ${\chi}^2$ test for each symptom. Results: Persistent pain was the most frequent reason for endodontic referral (29.5%), followed by presence of gingival swelling and sinus tract (24.1%), and apical radiolucency (12.9%). Referrals in cases involving endodontic difficulties such as canal calcification, broken instruments, post, perforation, and resorption were less than 5.0%, respectively. The percentages of four major clinical symptoms of pain, apical radiolucency, previous endodontic treatment, and gingival swelling and sinus tract were significantly higher in the endodontic referral cases than those in the total endodontic cases (p = 0.001). Among the included referral cases, 72.8% were treated with nonsurgical endodontic treatment only. Teeth other than the referred teeth were diagnosed as the origin of the problem in 5.8% of the referrals. Conclusions: The high prevalence of pain, apical radiolucency, previous treatment, and gingival swelling and sinus tract in endodontic referral cases suggest that these symptoms may be what general practitioners consider to be difficult and refer to endodontists.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권3호
• /
• pp.337-344
• /
• 2016

본 연구에서는 3차원(3-dimensional, 3D) 프린팅 기술로 출력된 팬톰에 대한 X선 투과성을 평가하고자 하였다. 3D 프린팅 방식은 용융적층조형(fused deposition modeling, FDM) 방식을 이용했으며 소재는 아크릴로나이트릴 뷰타다이엔 스타이렌(acrylonitrile butadiene styrene, ABS)을 사용하였다. 팬톰은 원통 모양으로 설계하였으며 전산화단층영상장비(computed tomography, CT)에서 획득한 단면영상으로 균일도를 측정하였다. X선 투과성 평가는 3D 출력된 팬톰 내부에 이온챔버를 삽입하여 실시하였다. 그 결과, 평균 균일도가 2.70 HU이었으며 기존 폴리메틸 메타크릴레이트(poly methyl methacrylate, PMMA) CT 팬톰과 3D 프린터로 출력된 팬톰에서 측정된 X선 투과성의 상관관계는 0.976로 높은 상관관계가 있는 것으로 나타났다. 향후 3D 프린팅 기술을 이용한 방사선정도관리 팬톰 제작에 기초자료로 활용할 수 있으리라 기대한다.

• Imaging Science in Dentistry
• /
• 제35권4호
• /
• pp.221-223
• /
• 2005

A case of osteoporotic bone marrow defect, which appeared as a well-defined multilocular radiolucency overlapping the roots of mandibular right second molar, was reported. On periapical radiograph, a daughter cyst-like radiolucency was seen at the anterior margin of the lesion making it difficult to rule out odontogenic keratocyst.

• Restorative Dentistry and Endodontics
• /
• 제26권2호
• /
• pp.124-126
• /
• 2001

A case of an unicystic ameloblastoma of the mandible presenting as an apical periodontal cyst was reported. The lesion showed an unilocular radiolucency with well delineated border. Histologic examination revealed that a fibrous cyst wall with a lining that consists of partially of ameloblastic epithelium. The overlying epithelial cells are loosely cohesive and resemble stellate reticulum. The fibrous cyst wall of the cyst is infiltrated by typical follicular ameloblastoma. but devoid of inflammatory reaction in the cystic wall. Some considerations regarding differential diagnosis. pathogenesis and biologic behaviour of the lesion were discussed.

• 대한방사선기술학회지:방사선기술과학
• /
• 제46권6호
• /
• pp.485-491
• /
• 2023

As an auxiliary tool for fixing the patient's posture when taking an X-ray, sponges with high radiolucencies are laminated in various thicknesses. This study aimed to evaluate the usefulness of an auxiliary tool for hand oblique projection X-ray by manufacturing it with a uniform thickness by 3D printing and comparing it with existing sponge tools. In the auxiliary tool, radiolucency was measured at the stairs where each finger was located, and pixel information values were compared in the digital imaging and communications in medicine(DICOM) image. Contrast to noise ratio(CNR) and signal to noise ratio(SNR) were compared by shooting the hand phantom and the auxiliary tool together. As the thickness of the sponge tool increased, radiolucency decreased by 15.52% and pixel information value increased by 20.61%. The transmittance of the 3D printing tool increased by 0.82%, and the pixel information value differed by 5.66%. CNR and SNR increased by 20.03% and 22.42% in 3D printing compared to existing sponge tools. while taking hand oblique projection, maintaining the thickness of the auxiliary tool uniformly through 3D printing maintains high radiolucency and minimal impact on medical images, and increases CNR and SNR, making it useful as an auxiliary tool for taking hand oblique projection.

• Restorative Dentistry and Endodontics
• /
• 제35권6호
• /
• pp.436-444
• /
• 2010

연구목적: 이 연구는 근관치료 전문의에 의해 시행된 비외과적 근관치료의 임상적 성공률을 전향적으로 평가하고, 치료 성공율과 관련된 환자요인과 치아요인의 영향력을 평가하는 것을 목적으로 하였다. 연구 재료 및 방법: 비외과적 근관치료가 이루어진 441개 치아 중 175개의 치아를 1-2년 후 임상적 검진과 방사선촬영을 하였다. 결과: 치근단 방사선 병소의 유무로 평가된 비외과적 근관치료의 성공율은 81.1% 였다. 치아요인 중 재근관치료, 괴사된 치수, 치수병변에서 유래된 치은의 부종 또는 sinus tract, 그리고 치료 전 치근단 병변의 존재는 이변수분석에서 치료성공에 부정적 영향을 미치는 것으로 나타났다 (p < 0.05). 환자요인, 치아요인과 근관충전의 길이를 포함한 단계적 로지스틱 회귀분석에서는 치수병변에서 유래된 치은의 문제 (odds ratio [OR]: 4.4; p = 0.005), 치료 전 치근단 병변의 존재 (OR: 3.6; p = 0.011), 그리고 치근단에서부터 1-2 mm 짧은 근관충전 (OR: 9.6; p = 0.012) 이 치료 실패와 관련된 주요한 요인으로 나타났다. 결론: 치료 전 치근단 병변의 존재뿐만 아니라 치수병변에서 유래된 치은의 부종 또는 sinus tract의 존재는 비외과적 근관치료의 실패에 영향을 줄 수 있는 것으로 나타났다.

• 치과방사선
• /
• 제25권1호
• /
• pp.151-157
• /
• 1995

Desmoplastic variant of ameloblastoma is a new and unusual variant of ameloblastoma with extensive stromal desmoplastic proliferation. The authors experienced a case of desmoplastic variant of ameloblastoma with moderate-defined radiolucency on the right maxillary anterior area in 62-year-old female. As a result of careful analysis of clinical, radiological, histopathological examinations, we diagnosed it as desmoplastic variant of ameloblastoma, and the following results were obtained : 1. Main clinical symptoms were nontender bony swelling with normal intact overlying mucosa on the right maxillary anterior area. 2. Radiographically, moderate-defined, multilocular radiolucency on the right maxillary anterior area were shown, and severe cortical bony thinning and expansion to labial and palatal sides were also observed. And this lesion was shown to be extended to the right nasal cavity. 3. Histopathologically, follicle-like epithelial islands with densely abundant collagenous stroma were morphologically compressed.