• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.811-820
• /
• 2012

GNSS signal is vulnerable to jamming signal because of well-known signal structure and weak signal power. For these reasons, the need for analysis of jamming effects and anti-jamming techniques of is increasing. In this paper, a GNSS signal generator is designed which includes a radio wave propagation model for six kind of tactical environments and a body masking model for the reception environment of a vehicle. The radio wave propagation model for downtown, rural, forest, coastline, waste land and snow or ice area is designed using two-ray model. The body masking model is designed the effect which the antenna is affected by the reception environment of a vehicle and radiation pattern from a user configuration. The performance of generated signals from the GNSS signal generator considering reception environment of a vehicle is evaluated by a commercial GPS L1 receiver(NordNav) in normal and jamming environment. Also, the generated GNSS signal is compared to a commercial GPS L1 H/W based RF signal generator(STR4500). The results show that the designed GNSS signal generator in a normal environment compared to the same navigation performance. In jamming environment, it is shown that the body masking effect and GNSS signal acquisition and tracking loss in compliance with the jamming signal are precisely working in the reception environment of a vehicle.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.488-495
• /
• 2012

The real-time indoor location technology using radio waves has been studied in a variety of environments. One of them, a ship which consists of steel structure has high reception rate but causes significant ranging error due to the reflection of radio waves. In order to reduce location measurement errors that occurs in such a environment, this paper, based on CSS of IEEE 802.15.4a, presents compensation algorithm for localization using modified bilateration and pyroelectric sensor in a ship. The proposed system reduces the number of fixed nodes by estimating the appropriate reception distance between mobile node and fixed node through the analysis of CSS characteristic in a narrow passage such as ship corridors. Also, in the corner section which the ranging errors are significantly fluctuated due to the reflection and diffraction of radio waves, we recognize the location by tracking the a moving section using modified bilateration technique and pyroelectric sensor. The experimental results show that the location accuracy and efficiency of the proposed algorithm are improved 86.2 % compared to general method.

• The Journal of Society for e-Business Studies
• /
• v.18 no.2
• /
• pp.223-240
• /
• 2013

RFID(Radio Frequency Identification) is use of an RFID tag applied to object for the purpose of identification and tracking using radio waves. Recently, it is being actively researched and introduced in logistics and manufacturing. RFID portals in supply chains are meant to identify all the tags within a given interrogation zone. Hence the hardware and software mechanisms for RFID tag identification mostly focus on successful read of multiple tags simultaneously. Such mechanisms, however, are inefficient for determining moving direction of tags, sequence of consecutive tags, and validity of the tag reads from the viewpoint of workflow. These types of problems usually cause many difficulties in RFID portal implementation in manufacturing environment, there by having RFID-system developers waste a considerable amount of time. In this research, we designated an RFID portal system with SDO(Sequence, Direction, and Object-flow)-perception capability by using fundamental data supplied by ordinary RFID readers. Using our work, RFID system developers can save a great amount of time building RFID data-capturing applications in manufacturing environment.

• Journal of The Korean Astronomical Society
• /
• v.48 no.2
• /
• pp.125-137
• /
• 2015

We report results of the performance evaluation of a new hardware correlator in Korea, the Daejeon correlator, developed by the Korea Astronomy and Space Science Institute (KASI) and the National Astronomical Observatory of Japan (NAOJ). We conduct Very Long Baseline Interferometry (VLBI) observations at 22 GHz with the Korean VLBI Network (KVN) in Korea and the VLBI Exploration of Radio Astrometry (VERA) in Japan, and correlated the aquired data with the Daejeon correlator. For evaluating the performance of the new hardware correlator, we compare the correlation outputs from the Daejeon correlator for KVN observations with those from a software correlator, the Distributed FX (DiFX). We investigate the correlated flux densities and brightness distributions of extragalactic compact radio sources. The comparison of the two correlator outputs shows that they are consistent with each other within < 8%, which is comparable with the amplitude calibration uncertainties of KVN observations at 22 GHz. We also find that the 8% difference in flux density is caused mainly by (a) the difference in the way of fringe phase tracking between the DiFX software correlator and the Daejeon hardware correlator, and (b) an unusual pattern (a double-layer pattern) of the amplitude correlation output from the Daejeon correlator. The visibility amplitude loss by the double-layer pattern is as small as 3%. We conclude that the new hardware correlator produces reasonable correlation outputs for continuum observations, which are consistent with the outputs from the DiFX software correlator.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.757-763
• /
• 2018

It is very difficult to achieve sufficient data rate and required quality of service due to the time-varying nature of the radio channel and various jammers such as path loss, delay, Doppler, shadowing and interference. Especially, the propagation path between the transmitting antenna and the tracking antenna mounted on the fuselage during the test and evaluation of the projectile system considered in this paper is based on the rapid movement of the projectile, the interference due to multipath fading due to the terrain, The propagation path may be blocked. In order to effectively improve the multipath fading occurring in the wireless communication system, a diversity combiner technique is required. In this paper, to derive the design and improvement schemes for the space diversity combiner technique among the diversity combiner schemes, the BER performance of maximum ratio combining (MRC) and selection combining (SC) In an adaptive SC / MRC diversity combiner that operates with MRC when it is lower than the specified threshold criterion when comparing the SNR between two signals received from the channel and operates with SC at high and combines the two received signals The BER performance of the system was compared and analyzed.

• Journal of Navigation and Port Research
• /
• v.30 no.9
• /
• pp.741-748
• /
• 2006

Number of researches on efficient terminal operation system applying RFID(Radio Frequency Identification) are in progress. However, RFID has limitations on tracking and providing accurate positions of containers. In this paper, to enhance the performance of the integrated terminal operation system, an efficient loading management of yard is proposed by applying RFID based RTLS(Real Time Locating System) that provides real time accurate positions of containers. It was found that a group based sequence system is more efficient than the existing individual sequence number system in the container yard In the group based sequence system, the containers in the same group should have similar characteristics such as port of destination(POD), size, weight, etc. In order to run this system, we proposed the parameters to the unspecified N bytes of RFID tag which are specified in ISO 18000 7. And then, we developed an integrated operation system of container terminal using RFID. The proposed system reduces the ship turnaround time in ubiquitous port environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.344-365
• /
• 2020

Providing security has been always on priority in all areas of computing and communication, and for the systems that are low on computing power, implementing appropriate and efficient security mechanism has been a continuous challenge for the researchers. Radio Frequency Identification (RFID) system is such an environment, which requires the design and implementation of efficient security mechanism. Earlier, the security protocols for RFID based on hash functions and symmetric key cryptography have been proposed. But, due to high strength and requirement of less key size in elliptic curve cryptography, the focus of researchers has been on designing efficient security protocol for RFID based on elliptic curves. In this paper, an efficient elliptic curve signcryption based security protocol for RFID has been proposed, which provides mutual authentication, confidentiality, non-repudiation, integrity, availability, forward security, anonymity, and scalability. Moreover, the proposed protocol successfully provides resistance from replay attack, impersonation attack, location tracking attack, de-synchronization attack, denial of service attack, man-in-the-middle attack, cloning attack, and key-compromise attack. Results have revealed that the proposed protocol is efficient than the other related protocols as it takes less computational time and storage cost, especially for the tag, making it ideal to be used for RFID systems.

• The KIPS Transactions:PartC
• /
• v.13C no.5 s.108
• /
• pp.595-600
• /
• 2006

Nowadays, low-cost radio frequency identification (RFID) technique, is recognizable without the physical contact between the reader and the tag, has been attracting more and more interests from both industry and academic institutes. however, it causes the serious privacy infringement such as excessive information exposure and user's location information tracking due to the wireless characteristics. The security problem of read only tag can be only solved by physical method. In this paper, we propose a low-cost authentication protocol which can be adopted for read-only RFID tag using XOR and Partial ID. The proposed protocol is secure against reply attacking, eavesdropping and spoofing attacking so that avoiding the location privacy exposure

• Journal of information and communication convergence engineering
• /
• v.5 no.4
• /
• pp.389-393
• /
• 2007

The distribution of donated blood for medical purpose is an area that presents many challenges. In order to establish a comprehensive solution, the current patterns of distribution must be reviewed and problems related to it need to be clearly understood. This paper introduces 'Radio Frequency Identification (RFID) System', as a potential solution to some of the problems which arise in the process of blood supply distribution, and a way to systematically manage the blood supply. For the various possible RFID systems, the reader and tag must be suitable for the purpose of blood distribution. A database has been designed that can recognize tags and objects in a ubiquitous RFID blood distribution system. In this paper, we design the real-time software to control the RFID reader system and transponder, using the EEPROM memory by RFID. The experimental results confirm that the transmission rate of 3.9kbps for RF is 125 KHz. The electric power usage of transponder chip is $100{\mu}W$, with the recognition distance is about 7cm range.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.140-144
• /
• 2004

Barcode system has been used for many years in labors controlling & ready mixed concrete supplement in A/E/C industry However, it was not quite successful because ot its limitations in the field. The use of RFID system is getting important in the real world. RFID system substituted for barcode system in labor controling & ready mixed concrete supplement and it showed its potentialities in other major materials supply logistics and its possibilities In progress management of 4D system. This research shows RFID system's case study and its future directions in A/E/C industry.