• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.594-601
• /
• 2000

Communication Based Train Control System supports the easy maintenance ＆ management and also have the capability to send more informations than the existing one but is less expensive. Tolerance against fault/failure and reliable data transmission are very important issues with this system since it has the responsibility of man's safety. In this paper, we suggested the schemes to support the reliable transmission quality and fault safety. Also we verified through simulation.

• 한국철도학회논문집
• /
• 제19권6호
• /
• pp.736-743
• /
• 2016

고속화 및 자동화 추세에 따라 열차제어시스템(TCS: Train Control System)은 유선으로 정보를 주고받는 기술에서 무선을 이용한 제어방식으로 기술이 발전되고 있으며, 무선방식도 2세대의 GSM-R에서 4세대 통신인 LTE를 적용한 LTE-R 무선통신 기술이 적용되고 있다. 따라서 무선통신(LTE-R)을 적용한 일반(250km/h이하) 고속철도(350km/h)용 열차제어시스템(KRTCS-2: Korea Radio based Train Control System-2, 이하 KRTCS-2라 함)에 적합한 표준사양(안)을 작성하고, 표준사양(안)을 기반으로 제작한 시작품을 일반열차 및 고속열차에 설치하고, 호남 고속선(정읍~익산) 및 원주-강릉선에 시험선을 구축하여 다양한 성능시험을 통해 표준사양(안)의 신뢰성 및 안전성을 확보하고자 한다. 이후 표준사양(안)은 국가 철도규격으로 제정하여 일반(광역) 고속철도 노선에 열차제어시스템을 적용함으로써 표준사양(안)이 실용화될 수 있도록 할 예정이다.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1095-1102
• /
• 2016

A TCS(Train Control System) is the core facility to ensure the safety and efficiency of train operations, it is difficult to have interoperability between the TCS suppliers. To ensure the interoperability between TCSs, there is a need for definition, validation and standardization on the system configuration, the functions of subsystems, the interface between subsystems an the system protocol. In this paper, we analyzed the completeness of the KRTCS(Korean Radio based Train Control System) specification, derived supplements what you need to apply the KRTCS specification to new urban lines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.402-404
• /
• 2000

The train control system using radio is based on the radio communication between an on-board control system and a ground control system unlike other train control systems that rely on track circuit. To realize a new train control system based on a new principle, it is important to analyze safety in a systematic manner at an early stage, and identify important factors for the system. For this reason, we think a procedure that select hazards and identify their causes and allocate safety requirements to such hazards. This paper describes this procedure to realize system safety.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1370-1378
• /
• 2008

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important. In the case of the system such as RF-CBTC(Radio Frequency-Communication Based Train Control), sometimes failure in correctness of train controlling information may happen because the information is sent throughout wireless transmission between on-board system of a train and wayside transmitter, and then, it is exposed to noises. Of RF-channel interference, there are various forms. Under the environment of mobile telecommunications, adjacent-channel interference and Co-channel interference are in trouble, and under the environment of the wireless LAN, inter-symbol interference is in trouble. Also, the system of the cellular CDMA mobile telecommunication is affected on the RF-channel interference such as Doppler effect, multi-cell interference, and other users' intervention. In this paper, we analyzed the effect of the train control information related to fading, intervention and other noises made in the underground interval and explained the transmission characteristics numerically. Furthermore, we calculated the mean of the error terms by increasing users in the system of the cellular CDMA. As the method for decrease the error term of sent information, we represented the way adjusting the arrangement of antennas, and we did the model related to the system of RF-CBTC in which the location of an antenna is calculated with really measured value of the transmission characteristics and the way confirming reliability of the wireless transmission.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1243-1250
• /
• 2008

LRT System Application Project is performed for the purpose of technical advancement and stabilization of K-AGT system from the viewpoint of practical use and commercialization. For those purpose, the performance test and evaluation procedure for signaling system are developed, and the scheme of verifying the performance and function of signaling system under multi-train and driverless control environment is being conducted. In general, the railway have kept their systems highly safe and reliable through the ongoing efforts over a period of many years. This has been achieved primarily by continuous improvements, which mean that there is a dearth of experience in the introduction of innovative new systems. Therefore it is said that comparing a new system that features a completely new architecture with a conventional one may be difficult. In this paper, we investigate the evaluation method for Radio based-Communication Based Train Control system from case study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1199-1204
• /
• 2004

In this paper, the DCS (Data Communication System) which is a main part of CBTC (Communication Based Train Control) system is consisted of radio based wireless communication system and optical based wired system. In the radio based wireless communication, the location of AP(Access Point) Enclosure and Antenna shall be optimized for the guaranteed communication channel between wayside and trains either open aired or tunnelled area. This study is introducing the way of determinating optimized positioning the radio based wireless communication equipment in Bundang Line. At this moment, this CBTC project for the KNR's (Korea National Railway) intelligent train control system are in installment phase therefore the simulation data can show only from lab equipment. After the phase I testing, more detailed data can be collected and advanced paper will be issued in a short time.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1044-1053
• /
• 2010

Transmitting correct train control information is important in a train control system which demands safety. The train control information includes the maximum speed of trains, position of preceding trains, incline of tracks and curve sections etc. A radio frequency-communication based train control system is influenced by the noise and interference because the train control information is transmitted by wireless between a on-board system and wayside system. The radio frequency-communication based train control system is a mobile communication system due to moving trains. The inter symbol interference(ISI) occurs by the multipath fading in the mobile ommunication system. As signal-to-noise ratio(SNR) is decreased by the ISI, the train control information is not received correctly. In case of tunnel section, numerous reflected waves exist. Therefore, the power density of receiver is decreased by difference among the received times, magnitudes, phases through the multipath. So, the train suddenly is stopped by the fail-safe operation in the train control system on account of decreasing the power density of receiver. In this paper, a line of sight model-(Additive White Gaussian noise(AWGN) channel), rayleigh and rician fading model are presented. Probability density functions which are related to the SNR are derived from the models. The fading phenomenon severely occurs as a result of analyzing the probability density functions. So, the space diversity method is used in order to reduce the fading effect and it is demonstrated by using Matlab program.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1023-1026
• /
• 2007

CBTC (Communication Based Train Control) is a railroad system, using wireless communication for data transmission between on-board units and ground units, that makes ground computer periodically collect position and speed data from each train and transmits the preceding train's distance data up to speed limit point so as to make on-board control unit control the optimum train speed. Due to the fact that wireless communication system for train control employs only limited frequency band and output frequency, a number of ground communication units should be installed at track-side; also a running train should carry out Handover function which maintains the communication by accessing a new communication channel of the adjacent on-board communication units in accordance with the output of received radio wave. Especially CBTC is largely dependent on Handoff function between ground communication units. Therefore, this paper provides the method of identification of hazard between ground communication units and on board units.

• 한국철도학회논문집
• /
• 제17권1호
• /
• pp.35-42
• /
• 2014

연구는 무선통신기반 열차제어시스템의 상호운영성(interoperability)을 확보하기 위하여 열차제어와 관련된 위험원 분석, 열차제어시스템의 기능요구사항 설정 및 차상과 지상ATP(Automatic Train Protection)장치의 기능배치를 포함하고 있다. 개방형 무선통신기술을 활용하고, 지상과 차상에서 수행되는 열차제어시스템의 기능배치를 표준화화여 상호운영성을 확보할 수 있으며, 이를 통하여 철도망의 통합운영체계를 구축할 수 있다. 상호운영성을 지원하는 열차제어시스템의 기능을 지상과 차상에 배치하기 위해서는 위험원 분석과 시스템 요구사항 정의를 필요로 한다. 열차제어시스템의 위험원으로 열차안전간격제어와 열차제한속도초과를 설정하여 위험원 요인을 확인하였다. 또한 위험원 요인이 열차제어시스템에 미치는 영향을 확인하고 열차제어시스템의 하부장치의 기능요구사항과 ATP의 지상기능과 차상기능 배치를 정의하였다.