• 융합신호처리학회논문지
• /
• 제9권1호
• /
• pp.31-38
• /
• 2008

Ad-Hoc 네트워크는 군사적인 목적으로 시작되었으며, 네트워크 인프라 구조가 없거나, 네트워크 인프라의 설치가 용이하지 않거나, 전쟁 및 분쟁지역, 재해나 재난에 의해 통신 시설을 설치하기 어려운 지역에서 비상 통신 수단으로 사용되고 있다. 그러나 Ad-Hoc 네트워크는 기존의 유선망과 비교하여 대역폭이 좁고 신호간의 간섭이 상대적으로 심하여 망 형상이 수시로 변경될 수 있다. 따라서 기존의 라우팅 알고리즘을 적용할 수 없으며, 새로운 라우팅 알고리즘 연구가 활발히 이루어지고 있다. 본 연구는 기존에 제안된 라우팅 알고리즘 중 클러스터에 헤더(주헤더)를 두어 관리하는 클러스터 기반의 라우팅 프로토콜(CBRP)에서 클러스터 내의 주헤더 노드를 제외한 모든 노드가 주헤더 통신을 의존함으로써 발생하는 주헤더 이상시의 문제점을 최소화하기 위해 클러스터 내에 보조헤더를 두어 클러스터 및 클러스터내의 모든 노드를 관리하는 방안(ACBRP)을 제안한다. 보조헤더 역할은 주헤더가 비정상적으로 되어 노드들 간의 송수신에 더 이상 참가할 수 없을 경우, 별도의 주헤더 재선출 과정 없이 보조헤더가 즉시 주헤더로 교체되어 기존의 주헤더 역할을 담당한다. 이는 CBRP에서 클러스터 주헤더 노드가 클러스터 밖으로 이동하거나, 비정상적인 상태가 되어 다른 주헤더 노드를 선출해야 하는 부담을 효과적으로 줄이고, 이 때 통신 중인 모든 노드는 통신의 중단 없이 계속적으로 라우팅을 유지할 수 있다. 따라서 본 연구가 기존의 CBRP에 비해 효율적인 통신을 할 수 있으며, 모의실험을 통해 ACBRP의 성능 평가를 위한 주헤더 재선출을 위한 비용 계산을 위해 필요한 데이터 값들을 측정하고, 기존의 CBRP와 비교 평가하여, 타당성을 확인하였다.(12.7%), 폐렴 4례 (7.2%), 기관지확장증 4례 (7.2%), 무기폐 4례 (7.2%)의 순으로 많았다.경우보다 높은 2.0 unit/mL의 농도에서 알파-갈 항원결정인자가 제거되는 양상을 보였다. 걸론: 돼지의 대동맥 판막 조직과 심낭 조직의 알파-갈 항원결정인자는 eriffonia simplicifolia의 동종렉틴 B4를 사용한 면역조직형광염색에서 잘 염색되었으며 이를 알파-갈락토시다아제를 사용하여 제거하였을 때 각각 1.0 unit/mL, 2.0 unit/mL 농도의 녹색콩 알파-갈락토시다아제를 $4^{\circ}C$, pH 6.5의 조건에서 24시간 반응시켰을 때 효과적으로 상당량 제거할 수 있었다. 향후 돼지의 판막조직 및 심낭조직으로 만드는 조직판막의 내구성 증대에 대표적인 동물 면역항원인 알파-갈 항원결정인자의 제거가 유용한 도구가 될 수 있을 것이며 앞으로 알파-갈락토시다아제로 처리한 돼지의 조직판막에 대한 인간혈장의 항-갈 항체 및 항-갈 단클론항체를 이용한 직접적인 면역학적 연구가 필요하다.광학거울 (Fine-grade optical mirror)을 이 부위에 넣고 반사시야에서 수술적 처치를 시행할 것을 주장했으나, 수술시의 출혈등에 의한 명료시야의 확보에 문제점이 있어 널리 시행되지 않았다. Saito(1971)등은 Sinus tympani의 접근방법으로서 종래의 중이강내에서 접근방식 (Tympani approach) 보다 유양동을 통한 접근(mastoid approach)이 보다 편리하고 확실한 방법일 것이라는 생각으로 42개의 측두골에 대한 미세해부학적 계측을 실시하였다. 그러나 연구결과에서 그는 Sinus tympani의 상부는 안면신경과 지나치게 가까운 거리에 있어

• 한국방사선학회논문지
• /
• 제13권3호
• /
• pp.371-379
• /
• 2019

관상동맥 조영술(CAG)의 씨네(Cine) 촬영에서 엑스선 촬영 조건의 변화가 입사 표면 선량(ESD)과 흡수선량(DAP)에 미치는 관계를 알아보고자 하였고 image J 프로그램을 통해 촬영된 혈관 조영 영상의 SNR과 CNR을 측정 분석하여 조건 변화가 선량관계 및 영상의 질에 미치는 유용성을 분석하고자 하였다. 2017년 11월부터 2018년 3월까지 본원에서 CAG를 시행한 33명(남24, 여9)의 데이터를 대상으로 하였고, 연령대는 37-76세(평균 $59{\pm}10$세), 몸무게53-104kg (평균 $72{\pm}10kg$), 키150-185cm (평균 $166.82{\pm}9.5kg$), BMI 18.3-33.2(평균 $25.8{\pm}3.2$)이었다. 촬영조건 및 데이터 획득은 관전류(mA)를 높게 한 A그룹(397.2mA)과 mA를 낮게 한 B그룹(370.7mA)의 ESD와 DAP를 후향적으로 획득하여 비교 분석 하였고 Image J를 통한 SNR과 CNR 측정 분석은 획득한 데이터를 공식에 대입하여 결과 값을 도출하였다. 통계프로그램은 SPSS (PASW)를 사용하여 촬영조건 변화에 따른 ESD와 DAP 및 SNR CNR의 상관관계 등을 분석하였다. 촬영조건의 mA에 변화를 주어 촬영한 A그룹과 B그룹의 ESD($A:483.5{\pm}60.1$, $B: 464.4{\pm}39.9$)와 DAP($A:84.3{\pm}10.7$, $B:81.5{\pm}7$)간의 관계는 통계적으로 유의하지 않았다(p>0,05). Image J를 통한 SNR과 CNR의 관계에선 B그룹의 좌심장동맥(LCA)을 촬영해 얻은 영상의 SNR($5.451{\pm}0.529$), CNR($0.411{\pm}0.0432$)이 A그룹 좌심장동맥(LCA)의 SNR($4.976{\pm}0.433$), CNR($0.459{\pm}0.0431$)보다 SNR $0.475{\pm}0.096$, CNR $-0.048{\pm}0.0$로 차이가 있었으나 통계적으로 유의하지는 않았다(p<0.05). 우심장동맥(RCA)을 촬영해 획득한 SNR과 CNR에선 A그룹의 SNR($4.731{\pm}0.773$)과 CNR($0.354{\pm}0.083$)이 B그룹의 SNR($3.24{\pm}0.368$), CNR($0.166{\pm}0.033$)보다 SNR $1.491{\pm}0.405$, CNR $0.188{\pm}0.005$로 증가된 수치를 나타냈으며 그 중 CNR이 통계적으로 유의했다(p<0.05). 상관관계 분석 결과에서는 SNR (LCA) & CNR (LCA), SNR (RCA) & CNR (RCA), ESD & DAP, ESD & sec, DAP & CNR (RCA), DAP & sec간에 통계적으로 유의한 차이를 나타냈다(p<0.05). SNR과 CNR이 높을수록 선명하고 좋은 화질을 나타냄을 의미하는데 화질평가 및 선량변화 유용성에 관한 분석 연구를 진행한 결과 mA를 증가시켜 촬영 한 CAG의 RCA영상에서 SNR과 CNR이 증가된 수치를 보였다. 특히, CNR이 통계적으로 유의한 차이를 나타낸 것을 보았을 때 RCA촬영 시 mA를 향상시켜 촬영 할 경우 영상의 질 중 대조도가 한층 더 향상 될 수 있을 것으로 사료된다.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1210-1230
• /
• 1997

본 논문에서는 기준신호를 나타내는 하나의 파일럿채널과 다수의 트래픽채널을 갖는 DS/CDMA용 송수신기구조를 제안한다. 파일럿채널은 데이타 변조가 되지 않은 순수 PN 부호성분을 전송하며 수신단에서 PN 동기 및 동기복조의 기준신호로 이용한다. 또한 이러한 구조는 순방향뿐만 아니라 역방향 링크에도 적용된다. 제안된 DS/CDMA 방식의 특징은 다음과 같다. 첫째, 트래픽채널의 확산 방식은 I-phase 및 Q-phase의 확산부호를 파일럿채널의 그것과 교차하게 배치한 interlaced quardrature-spreading(IQS) 구조를 갖는데 이는 기존의 확산방식에 비해 데이타 신호의 영교차율을 줄여 송신단 출력신호 레벨의 변화를 작게한다. 둘째, PN부호의 초기동기 및 동기초적시 임계값을 적응적으로 자동설정하며, 초기동기시 PN 부호를 한 칩씩 이동하게 하여, 기존의 방식에 비해 초기동기 시간을 절반으로 줄이게 했으며, 수신부에서 PN 부호 발생기를 하나만 사용하여 초기동기 및 동기추적이 되게했다. 또한 state machine을 이용하여 재동기 timing을 자동설정 하도록 설계했다. 셋째, 본 방식에서는 자동주파수조절(automatic frequency control: AFC)기능, 입력신호의 크기에 따라 능동적으로 유효한 출력 레벨을 조절하는 자동 레벨조절(automatic level control: ALC)기능, bit-error-rate(BER)을 자동계산하는 기능, 인접 채널과의 간섭을 최소화하기 위한 스펙트럼 성형기능 등을 도입하여 사용자 편의를 도모했다. 넷째, 데이타 전송속도를 16Kbps~1.024Mbps로 가변이 되게함으로써 다양한 응용에 대처할 수 있게 설계했다. 한편, 본 논문에서 제안한 DS/CDMA 모뎀구조는 다양한 simulation을 통하여, 알고리즘 검증 과정을 거쳤으며, 제안된 DS/CDMA 모뎀 구조는 VHDL을 이용하여 ASIC으로 구현하였다. DS/CDMA용 ASIC은 송신부 ASIC과 수신부 ASIC으로 나누어 개발 하였으며, 한개의 ASIC당 3개의 채널을 동시에 수용할 수 있으며, 다수의 ASIC을 사용하여 여러 채널의 다중접속이 가능하다. 제작완료된 ASIC은 기능시험을 완료했으며 실제 line-of-sight(LOS) 시스템 구현에 적용중이다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1992년도 춘계학술대회
• /
• pp.27-47
• /
• 1992

Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

• 전자공학회논문지
• /
• 제54권3호
• /
• pp.3-9
• /
• 2017

최근 3GPP에서는 급증하는 차량 사고에 대처하고, 교통 효율, 텔레매틱스와 인포테인먼트를 제공하기 위해 LTE(Long Term Evolution) 기반 차량 통신에 대한 연구가 활발히 진행되고 있다. 차량 통신은 안전과 밀접한 관련이 있기 때문에, 신뢰성 있는 통신을 필요로 한다. 하지만 차량의 속도는 매우 빠르기 때문에 기존 사용자의 이동성과는 달리 무선 채널이 시간에 따라 빠르게 변하게 되어 전송 품질 저하 등 많은 문제가 발생하게 된다. 본 논문에서는 LTE 기반 V2V(Vehicle-to-Vehicle) 환경에서 채널 추정 기법을 제안한다. 기존 기법인 LS(Least Square) 채널 추정은 송 수신단이 알고 있는 파일럿 심볼을 이용해 얻어지며, DDCE(Decision Directed Channel Estimation)는 데이터 심볼을 이용해 채널 추정을 하고, CDP(Constructed Data Pilot) 기법은 인접한 두 데이터 심볼 사이에서 상관이 큰 특성을 이용하며, 그리고 STA(Spectral Temporal Averaging) 기법은 주파수와 시간 영역에서 채널을 평균을 취한다. 또한 Smoothing 기법은 데이터 결정 오류에 의한 최대치를 줄여준다. 제안기법인 HRCE(Hybrid Reliable Channel Estimation)는 기존의 Smoothing 기법에 LMMSE(Linear Minimum Mean Square Error)를 적용함으로써 더 정확한 채널 추정이 이루어져 신뢰성 있는 데이터 검출을 가능하게 한다. 모의실험 결과, 제안한 기법이 NMSE(Normalized Mean Square Error)와 BER(Bit Error Rate) 측면에서 전체적으로 성능이 향상 된 것을 볼 수 있다.

• Journal of Oral Medicine and Pain
• /
• 제30권1호
• /
• pp.69-77
• /
• 2005

이갈이 치료에 가장 널리 이용되고 있는 구내교합장치는 치아와 턱관절 및 주위조직을 보호함으로써 이갈이 때문에 발생하는 여러 합병증을 예방하는 것을 주목적으로 하지만, 이갈이 억제에 있어서는 일시적인 증상감소의 효과만을 가질 뿐이므로 환자 스스로가 이갈이를 인지하여 습관을 중단할 수 있도록 하기 위한 특수한 장치의 개발이 시도되고 있다. 본 연구에서는 소형 방수 스위치를 이용하여 구내장치에 들어가는 부품을 최소화하고 전원의 사용시간을 최대화 함으로서 상품화 가능한 이갈이 진단 및 조절용 장치(이하 이갈이장치)를 개발하여 소개하고, 임상적으로 사용하기 전 장치에 대한 신뢰도를 조사하고자 하였다. 새로 개발한 장치는 이갈이 센서인 소형 방수스위치로 구성된 정보입력부, 중앙정보처리장치(CPU)인 정보처리부, 이갈이 신호를 수신하는 정보저장부, 이갈이 신호에 대한 소리나 진동으로 반응하는 반응장치부 및 컴퓨터상에서 저장된 이갈이 정보를 표시하여 이갈이 빈도와 시간, 양태 등을 확인시켜주는 정보표시부로 구성되어 있다. 이 중에서 resin sheet로 만든 상하의 wafer 사이에 정보입력부인 스위치는 좌우 견치 설면에 고정하고 정보처리부 CPU는 구개중앙에 고정하여 구내교합장치를 제작한 한편, 여기에서 송신되는 정보는 별도의 외부 장치인 반응장치 및 정보저장장치에서 인식하여 feedback을 보낼 수 있도록 하였다. 장치제작의 신뢰도조사를 위해서는 단국대학교 치과대학 학생 중 정상교합을 가진 지원자 10명의 상악 석고모형에 대하여 두 명의 술자가 각각 이갈이장치를 제작하여 그 장치가 반응하는 힘의 크기를 비교하였으며(술자간 신뢰도조사), 또한 한명의 술자가 첫 회에 조사한 정보를 기억하지 못하게 약 2일의 시간 간격을 두고 각각 제작하고 그 장치가 반응하는 힘의 크기를 비교하였다(술자내 신뢰도조사). 술자간 및 술자내 조사에서 이갈이장치가 반응하는 최소의 수직력, 측방력, 중심력에서 모두 높은 상관관계를 보였으며 측정된 값에 있어 서로 유의한 차이를 보여주지 않았다. 새로 개발한 이갈이장치는 부품을 소형화하였으며 제작이 편리하고 구강내에서 안전하게 사용할 수 있을 뿐만 아니라 전원의 사용시간을 최대로 할 수 있다는 장점을 가지고 있으며 술자간 및 술자내 신뢰도 조사를 통하여 임상에 적용가능한 높은 재현성을 확인할 수 있었다. 결론적으로 이 장치는 정보처리 및 저장장치가 있고 음향이나 진동을 이용한 바이오피드백 기능을 가지고 있어 이갈이 환자의 진단과 조절에 임상적으로 유용하게 사용될 수 있을 것으로 생각된다.

• Investigative Magnetic Resonance Imaging
• /
• 제8권1호
• /
• pp.32-41
• /
• 2004

목적 : MnPC의 자기이완성질을 살펴보고, 토끼의 간에 이식한 VX2 암종을 이용해 자기공명영상에서 간의 조영증강형태를 관찰하고자하였다. 또한 간세포 특이성 조영제 사용 시와 비교하여 MnPC의 조직특이성 조영제로서의 가능성을 탐색해 보고자 하였다. 대상 및 방법 : 조영제 합성시 상자성 원소의 배위자로 phthalocyanine(PC)를 선택하였다. 2.01 g (5.2 mmol)의 phthalocyanine을 0.37g(1.4 mmol)의 manganese chloride와 $310^{\circ}C$에서 36시간동안 반응시킨 후 혼합물을 크로마토그래피 (CHC13: CH3OH=98:2, volume ratio)로 정제하여 2000 달톤의 분자량을 갖는 1.04 g $(46\%)$의 MnPC를 얻었다. 자기이완율은 MnPC를 0.1 mmol로 희석시켜 1.5 T (64 MHz)에서 측정하였다. VX2 암종은 토끼의 간실질 내에 종양세포 부유액을 주입해 실험적으로 유발시켰다. 모든 영상은 1.5 T MR장비에서 무릎관절코일을 사용하여 획득하였다. 본 연구에서 새로 개발된 거대분자 자기공명영상 조영제인 MnPC (4m-mol/kg)와 간세포 특이성 조영제인 Mn-DPDP (0.01 mmol/kg)가 사용되었으며 이들 조영제는 토끼의 이정맥을 통해 주입되었다. T1 강조영상은 스핀에코 (TR/TE=516/14 msec)와 고속다면회손경사회복 (TR/TE=80/4 m-sec, flip angle $60^{\circ}$)을 사용하여 얻었고, T2 강조영상의 획득을 위해서는 고속스핀에코 (TR/TE=1200/85 m-sec)를 사용하였다. 결과 MnPC의 1.5T (64MHz)에서의 자기이완율은 $R1=7.28\;mM^{-1}S^{-1}$, $R2=55.56\;mM^{-1}S^{-1}$ 이었고, MnPC의 높은 T2 자기이완율은 T2 강조영상에서의 정상 간실질의 신호강도를 감소시켜 간실질과 VX2 암종의 구분을 쉽게 하였다. MnPC 주입시 T1 강조영상에서는 간세포 특이성 조영제의 주입시보다 종양의 경계가 명확하였고, 조영증강은 주입후 최소한시간 이상 높게 유지되었다. 결론 : MnPC가 간세포로 흡수되어 담관으로 배설된다는 사실은 Mn-DPDP와 유사한 특성이며 이는 MnPC가 새로운 간특이성 조영제임을 확인시켜 준다. 또한 MnPC의 R2값이 기존의 조영제에 비해 매우 크다는 사실은 T1 조영제로서 뿐만 아니라 T2 조영제로서의 사용 가능성을 보여준다. 이러한 사실들을 좀더 정확하게 뒷받침하기 위해서는 임상적으로 사용되기 이전에 생체 내 그리고 시험관내 연구가 더 필요하며 다른 동물모델에서의 추가적인 연구가 요구된다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.