• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5149-5173
• /
• 2016

Cooperative forwarding has shown a substantial network performance improvement compared to traditional routing in multi-hop wireless network. To further enhance the system throughput, especially in the presence of highly congested multiple cross traffic flows, a promising way is to incorporate the multi-radio multi-channel (MRMC) capability into cooperative forwarding. However, it requires to jointly address multiple issues. These include radio-channel assignment, routing metric computation, candidate relay set selection, candidate relay prioritization, data broadcasting over multi-radio multi-channel, and best relay selection using a coordination scheme. In this paper, we propose a simple and efficient cluster-based cooperative data forwarding (CCDF) which jointly addresses all these issues. We study the performance impact when the same candidate relay set is being used for multiple cross traffic flows in the network. The network simulation shows that the CCDF with MRMC not only retains the advantage of receiver diversity in cooperative forwarding but also minimizes the interference, which therefore further enhances the system throughput for the network with multiple cross traffic flows.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.133-142
• /
• 2006

This paper suggests an efficient method of protection ratio(PR) calculation and shows some results of point-to-point radio relay system for frequency coordination. The proposed PR can be expressed as a function of C/N of modulation scheme, noise-to-interference ratio(N/I), multiple interference allowance, fade margins of multi-Path and rain attenuation and net filter discrimination. And PR calculation is performed in view of fade margin, modulation scheme, distance, and interference for actual point-to-point radio relay frequency. According to results for 6.2 GHz, 64-QAM and 60 km at BER 10-6, fade margin and co-channel Protection ratio reveal 41.1dB and 74.9 dB, respectively The merit of presented method provides a systematic and easy calculation by means of PR correction factor related with various parameters and can apply the same concept to frequency coordination of millimeter wave radio relay system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1444-1454
• /
• 2000

The implementation of IF group delay equalizer and its performance are presented for radio relay system applications, and measured results are in good agreement with the simulated ones based upon analytical formulations. For waveguide filter of 40㎒ channel spacing, equalized delay accuracy of about +/- 2.0nsec can be obtained only by constructing 4 stage delay circuits, which provides good performance in system BER curves compared with no filter case, and the difference is less than 1.0㏈ at $10^{-12}$ BER. So this scheme with simple hardware design can be used for correcting the distorted group delays mainly caused by wavegiude filters. To evaluate the designed group delay equalizer, various simulated and experimental results are shown here in conjunction with STM-1 signal of co-channel 64-QAM digital radio relay system.

• Journal of Communications and Networks
• /
• v.13 no.3
• /
• pp.250-256
• /
• 2011

A two-way relaying (TWR) system is analyzed, where two source terminals with unequal numbers of antennas exchange data via an amplify-and-forward relay terminal with a single antenna. In the system considered herein, the link quality between the sources and relay can generally be asymmetric due to the nonidentical antenna configuration, power allocation, and relay location. In such a general setup, accurate bounds on the average sum rate (ASR) are derived when beamforming or orthogonal space time block coding is employed at the sources. We show that the proposed bounds are almost indistinguishable from the exact ASR under various system configurations. It is also observed that the ASR performance of the TWR system with unequal numbers of source antennas is more sensitive to the relay location than to the power allocation.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.30-35
• /
• 2012

In this paper, we proposed spectrum sensing using cooperative relay to solve problem of sensing performance degradation due to CPE (Customer-Primise equipments) which causes low SNR (signal-to-noise ratio) problem. This system model is expected that cooperative relay scheme guarantees the high sensing performance by its diversity gain. Based on these backgrounds, in this paper, we apply to cooperative relay scheme to the CR (cognitive radio) system, and simulation results show comparison of the sensing performance combining method EGC and MRC.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.39-45
• /
• 2019

Recently, Cognitive radio (CR) has been focused for the effective utilization of the limited spectrum. Since an overlay CR system shares the given spectrum with the unlicensed system simultaneously, its spectral efficiency is high. However, most of the studies on an overlay CR system have been focused on the performance enhancement of the licensed receiver (LR). Correspondingly, the performance of the unlicensed receiver (UR) is degraded. Therefore, we propose an overlay CR NOMA system to improve the performance both of the LR and UR, which has a selected relay for the UR and adjusts the power allocation for the LR. The analytical performance of the proposed system is derived and verified the results through simulation. It is noticed that the UR can be obtained signal-to-noise ratio (SNR) gains by the selected relay, consequently, the system performance can be improved. Also, we show that the performance of the proposed system can be controlled by the number of the relays as well as the power allocation ratio. The results reveal that the required performance of the system can be satisfied with the use of the selected relay under the limited transmit power.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.414-420
• /
• 2009

In this paper, we investigate throughput performance of OFDMA-based relay systems according to the "sub-cell coverage configuration" of the base station (RS) and the relay station (RS). RS is exploited for improved quality of the received signal with a tradeoff of additional radio resource consumption which may result in degradation of the throughput performance of the system. Therefore, "radio resource reuse" may be necessary for high performance in relay systems. However, it also causes system performance degradation since resource reuse between RSs incurs channel interference. Therefore, effective resource reuse also should be considered for "high throughput coverage configuration" when relays are employed. We relate the resource reuse patterns of neighboring RSs to sub-cell coverage configuration. We determine the sub-cell coverage of the system depending on the ratio of received signal-interference-noise-ratio (SINR) of the mobile station (MS) from the BS and RS, respectively. Simulations illustrate the throughput performance as the function of SINR ratio, and it has different optimal point depending on the resource reuse patterns. Therefore, the "resource reuse pattern" and the "effective sub-cell coverage configuration" should be considered together for the high throughput performance of the relay system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.25-28
• /
• 2001

In this paper. to eliminate a cross-polarization interference caused by co-channel dual polarization technique of digital radio relay system(DRRS), a cross-polarization interference canceller(XPIC) is analysed in terms of the analytical modeling, digital design, and its performance. By virtue of a 13-tap adaptive equalizer and XPIC, about 23dB in XPIC improvement can be obtained by computer simulation. To show the operation of designed XPIC, some simulated results are reviewed under 64-QAM DRRS with co -channel dual Polarization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.19-25
• /
• 2009

The performance of a cognitive radio system with cooperative diversity which includes the direct and indirect path is analysed. The selection relay cooperation which selects the best relay, the relay with the best received signal-to-noise ratio(SNR) in destination node, is considered and derived the performance degradation caused by the CSI(Channel State Information) delay analytically. Numerical examples show that the cooperative diversity which have the direct and the indirect paths effectively improves the system performance in Rayleigh fading; the performance improves 4.4 dB with 1/10 of SNR of the indirect path. And the system performance is more degraded with the less frequency acquisition probability and with the high CSI delay.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.11
• /
• pp.10-22
• /
• 1998

In this paper, as a way of improving the availability and spectral efficiency of radio relay system, a co-channel radio relay system based upon the synchronous digital hierarchy is developed and its performance measured by 64-QAM with a never-seen multi-purpose ASIC chip is illustrated. This system provides a couple of transmission capacity compared with alternative channel arrangement. By adopting a powerful complex 13-tap adaptive time domain equalizer and cross-pol interference canceller, improvement of more than 1.5 ~ 2.0 dB in signature is obtained in comparison to 9 or 11-tap adaptive time domain equalizer, and about 22.5 dB in improvement factor of cross-pol interference canceller is achieved at C/N of 24.5 dB. In addition, digital filter makes it possible to optimize the occupied bandwidth by selecting an appropriate roll-off factor externally. It is expected that co-channel radio relay system with the powerful multi-purpose ASIC chip plays a key role in creating a value-added product, reliability, and reducing the outage time.