• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1023-1026
• /
• 2007

CBTC (Communication Based Train Control) is a railroad system, using wireless communication for data transmission between on-board units and ground units, that makes ground computer periodically collect position and speed data from each train and transmits the preceding train's distance data up to speed limit point so as to make on-board control unit control the optimum train speed. Due to the fact that wireless communication system for train control employs only limited frequency band and output frequency, a number of ground communication units should be installed at track-side; also a running train should carry out Handover function which maintains the communication by accessing a new communication channel of the adjacent on-board communication units in accordance with the output of received radio wave. Especially CBTC is largely dependent on Handoff function between ground communication units. Therefore, this paper provides the method of identification of hazard between ground communication units and on board units.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1370-1378
• /
• 2008

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important. In the case of the system such as RF-CBTC(Radio Frequency-Communication Based Train Control), sometimes failure in correctness of train controlling information may happen because the information is sent throughout wireless transmission between on-board system of a train and wayside transmitter, and then, it is exposed to noises. Of RF-channel interference, there are various forms. Under the environment of mobile telecommunications, adjacent-channel interference and Co-channel interference are in trouble, and under the environment of the wireless LAN, inter-symbol interference is in trouble. Also, the system of the cellular CDMA mobile telecommunication is affected on the RF-channel interference such as Doppler effect, multi-cell interference, and other users' intervention. In this paper, we analyzed the effect of the train control information related to fading, intervention and other noises made in the underground interval and explained the transmission characteristics numerically. Furthermore, we calculated the mean of the error terms by increasing users in the system of the cellular CDMA. As the method for decrease the error term of sent information, we represented the way adjusting the arrangement of antennas, and we did the model related to the system of RF-CBTC in which the location of an antenna is calculated with really measured value of the transmission characteristics and the way confirming reliability of the wireless transmission.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1044-1053
• /
• 2010

Transmitting correct train control information is important in a train control system which demands safety. The train control information includes the maximum speed of trains, position of preceding trains, incline of tracks and curve sections etc. A radio frequency-communication based train control system is influenced by the noise and interference because the train control information is transmitted by wireless between a on-board system and wayside system. The radio frequency-communication based train control system is a mobile communication system due to moving trains. The inter symbol interference(ISI) occurs by the multipath fading in the mobile ommunication system. As signal-to-noise ratio(SNR) is decreased by the ISI, the train control information is not received correctly. In case of tunnel section, numerous reflected waves exist. Therefore, the power density of receiver is decreased by difference among the received times, magnitudes, phases through the multipath. So, the train suddenly is stopped by the fail-safe operation in the train control system on account of decreasing the power density of receiver. In this paper, a line of sight model-(Additive White Gaussian noise(AWGN) channel), rayleigh and rician fading model are presented. Probability density functions which are related to the SNR are derived from the models. The fading phenomenon severely occurs as a result of analyzing the probability density functions. So, the space diversity method is used in order to reduce the fading effect and it is demonstrated by using Matlab program.

• Proceedings of the KSR Conference
• /
• 2002.10a
• /
• pp.478-483
• /
• 2002

Presently metro in our county has higher rate of passengers as a public transportation of urban area than other transportations. And road is under very restrictive condition to be expanded in many aspects because the streets are completely choked. Therefore increase of capacity in metro and reduction of headway has been seriously required and utmost efforts has been taken by related fields to meet the requirements. The concept of CBTC system came out from this background. CBTC system can be implemented to detect the train location without using the track circuits. It has many advantages in aspects of signalling equipments build-up and maintenance. This study investigated examples of radio communication system and applicable standard norms in other countries. And it also reviewed the suggestion for the establishment of radio frequency and radio network to be considered for application train control system by radio under Korean metro environment.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.39-45
• /
• 2010

The RF-CBTC (Radio Frequency-Communication Based Train Control) System is a communication system in railroad systems. The communication method of RF-CBTC system is the wireless between the wayside device and on-board device. The wayside device collects its location and speed from each train and transmits the distance from the forwarding train to the speed-limit position to it. The on-board device controlling device controls the speed optimum for the train. In the case of the RF-CBTC system used in Korea, transmission frequency is 2.4 [GHz]. It is the range of ISM(Industrial Scientific and Medical equipment) band and transmission of voice and data is performed by CDMA (Code Division Multiple Access) method. So noises are made in the AWGN (Additive White Gaussian Noise) and fading environment. Currently, the SNR (Signal to Noise Ratio) is about 20 [dB], so due to bit errors made by noises, transmission of reliable information to the train is not easy. Also, in the case that two tracks are put to a single direction, it is needed that two trains transmit reliable voice and data to a wayside device. But, by noises, it is not easy that just a train transmits reliable information. In this paper, we estimated the BER (Bit Error Rate) related to the SNR of voice and data transmission in the environment such as AWGN and fading from the RF-CBTC system using the CDMA method. Also, we supposed the SNR which is required to meet the BER standard for voice and data transmission. By increasing the processing gain that is a ratio of chip transmission to voice and data transmission, we made possible voice and data transmission from maximally two trains to a wayside device, and demonstrated it by using Matlab program.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.145-153
• /
• 2011

In the system necessary for safety such as the train control system, to make train control information be sent correctly is very important to enable organic movement between trains. In the case of the system such as RF-CBTC (Radio Frequency Communication Based Train Control) the control related information is sent through wireless transmission between on-board system of a train and wayside transmitter. The wayside transmitter collects the running information such as location, velocity from the on-board system and operates the optimizing control by sending the control information such as the target, limited velocity to the on-board system. But, when the communication disconnect or train failure, the critical hazard such as train collision or derailment may be possible because the RF-CBTC depends on the information through wireless communication. This paper discribes of performing Fall-Back system to detect train position in the case of rail break or communication failure to avoid train accident and allows train to be operated safely. It can be implemented with ATP function through track circuits using active-type transformers and axle counters, and allows train to be operated manually in emergency status.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.149-156
• /
• 2012

This paper suggests the data transmission technology for applying to the actual railway line based on the technological trends and theories for the wireless Mesh techniques. This paper presents a technical basis that is applicable to the economic and efficient use of frequency and to the development of a Communication Based Train Control System by demonstrating its Applicability, Availability, Reliability and Safety for the train control system of the radio frequency of the bandwidth of 5.7 GHz at the experiments.

• Journal of the Korean Society for Railway
• /
• v.10 no.5
• /
• pp.589-595
• /
• 2007

Korea Railroad Research Institute has developed the driverless rubber-tired K-AGT (Korean-Automated Guideway Transit) system from 1999 to 2005 and has done its performance and reliability tests on the test line at Gyeongsan-city. Radio Frequency Communication-Based Train Control system of K-AGT, which employed Advanced Automated Train Control scheme, detects train position using the radio propagation delay between wayside and vehicle radio equipment. In this paper, we investigate whether the transmission power of radio system can be reduced to the permitted level announced by the Ministry of Information and Communication for license-free ISM(Industrial Scientific Medical) frequency bands. We first determine radio propagation model, using the measured data at test line, and perform simulation for radio coverage prediction. From the simulation results, we identify that the radio system operated with reduced power can provide good link quality in total test line.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.510-518
• /
• 2013

These days, interest in radio networks for railways has increased both at home and abroad. In response to this trend, not only the existing radio networks which focus on railway control signals but also the next-generation integrated radio network that can send videos and manage mass storage data are actively being investigated. This paper proposes wireless communication methods to establish integrated radio networks for railways. The paper further suggests a candidate frequency band that could be allocated as the frequency band for railways among the frequency bands currently used in Korea. Based on this paper, we can expect that the domestic railroad will operate more efficiently and that security and convenience of the railroad will reach a superior level. In addition, the Korean integrated radio networks for railways, which cope with the changes in the global technology market, will be established.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.2705-2710
• /
• 2011

With the rapid development of information and communication technology, CBTC system based on the wireless communication is widely applied in the railway signal system recently. CBTC system has advantages of lower installation space and maintenance fee than existing systems and the increase of transportation capacity and improvement of operating efficiency etc. due to the short headway. Based on the continuous wireless data communication between onboard and wayside equipment, CBTC system not only locates the train and transmits the information required for the train control, but also implements the moving block function by calculating the brake curves continuously according to distance from the preceding train. CBTC system can use either inductive loop (IL-CBTC) or radio frequency transmissions (RF-CBTC). In this paper, we propose RF-CBTC system architecture based on the functional modules, in which the CAN bus network is applied for the interfaces between the modules.