• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.87-92
• /
• 2018

One of the problems with the base station equipment is that there is a large difference between the replacement time of the hardware equipment such as the base station equipment and the radio access equipment, and the evolution period of the communication standard. Therefore, the base station communication platform must be flexible enough to handle the evolving communication standards after purchase. Recent research on reconfigurable communications platforms has focused on the efficient architecture of the communications platform to meet these requirements through software downloads while still using existing hardware. This paper presents a prototype of a base station communications platform based on the ETSI standard reconfigurable architecture. The communication platform presented in this paper is implemented as an ETSI standard reconfigurable architecture using a general-purpose DSP (Digital Signal Processor). In the implemented prototype, we verify the real-time feasibility of communication protocol updates through software reconfiguration.

• Advances in aircraft and spacecraft science
• /
• v.9 no.6
• /
• pp.525-536
• /
• 2022

The current state of telecommunications infrastructure in the Arctic does not allow providing a wide range of required services for people, businesses and other categories, which necessitates the use of non-traditional approaches to its organization. The paper proposes an innovative approach to building a combined communication network based on tethered high-altitude platform station (HAPS) located at an altitude of 1-7 km and connected via radio channels with terrestrial and satellite communication networks. Network configuration and composition of telecommunication equipment placed on HAPS and located on the terrestrial and satellite segment of the network was justified. The availability of modern equipment and the distributed structure of such an integrated network will allow, unlike existing networks (Iridium, Gonets, etc.), to organize personal mobile communications, data transmission and broadband Internet up to 100 Mbps access for mobile and fixed subscribers, rapid transmission of information from Internet of Things (IoT) sensors and unmanned aerial vehicles (UAV). A substantiation of the possibility of achieving high network capacity in various paths is presented: inter-platform radio links, subscriber radio links, HAPS feeder lines - terrestrial network gateway, HAPS radio links - satellite retransmitter (SR), etc. The economic efficiency of the proposed solution is assessed.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.183-184
• /
• 2008

From the beginning of a new millennium, the digital broadcasting services had been adopted to cable, satellite and radio broadcasting services as well as the terrestrial TV broadcasting services. The government established the installation standard of digital receiving equipment in 2007, which is needed for taking the new digital broadcasting services without additional facilities in an apartment house. In this paper, I will show the installation standard of digital receiving equipment in an apartment house and give a detailed explanation for the main criteria of it.

• Journal of electromagnetic engineering and science
• /
• v.8 no.4
• /
• pp.153-157
• /
• 2008

Most of malfunctions in electronic equipment or systems controlled by processors is occurred by the differential- and common-mode noises, and the electrical fast transient (EFT). The International Electrotechnical Commission (IEC) has prepared the dummy signal to test the immunity level of the equipment. For the countermeasure against the differential- and common-mode noises, and the EFT, we designed, fabricated, and tested a new electromagnetic compatibility (EMC) filter, which is composed of feed-through capacitors and ferrite beads with high permeability. As a result, the filter showed excellent differential- and common-mode noises filtering, and immunity improving characteristics over the frequency band from 30 MHz to 1.5 GHz and 1.8 GHz, respectively.

• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.738-743
• /
• 2009

Personnel maintaining or repairing the railway tracks or signaling device around tracks may experience the sensory disorder when they do routine works for many hours and they may not recognize the leading to train accidents. In order to prevent such train accidents that may occur because railway track workers are unable to recognize the approaching train, a safety-equipment is developed to make the approaching train send signals. We developed the new alarm equipment for protection of trackside maintenance workers using radio signals.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.45-50
• /
• 2005

This paper make an analysis of UWB Communication System. In case endoscope, medical equipment, is applied to UWB, We could study through body-channel that frequency transmitted of received signal is differ from wireless in the existing air. It suggested TR-UWB form, non-coherent received method in dispersion-medium like humans bodies by accomplishing ability analysis of BPM, TR, BER of Differential, UWB Communication modulation and demodulation form.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.4
• /
• pp.24-31
• /
• 2006

To reduce the interferences between the radio equipments which are operated in frequency hopping mode, the frequency resource should be assigned to each equipment without overlapping when several groups of radio equipments operate in the same area. If the radio equipments are in a different area, the partial frequency overlaying can be permitted. From the isotropic multi-dimensional array, several frequency assignment tables can be extracted for a same area. Also several tables can be extracted for different areas. Since there can be no overlapped frequencies between the tables for the same area, no interference between the radio equipments in an area is guaranteed. The frequencies overlapped between 2 tables for 2 different areas are pre-planed as required. The interference performance in frequency hopping radio can be controlled as desired using the proposed Frequency Resource Assignment Algorithm using Isotropic multi-dimensional Array.

• ETRI Journal
• /
• v.36 no.6
• /
• pp.953-959
• /
• 2014

This paper studies the uplink resource allocation for multiple radio access (MRA) in reconfigurable radio systems, where multiple-input and multiple-output (MIMO) multicarrier-code division multiple access (MC-CDMA) and MIMO orthogonal frequency-division multiple access (OFDMA) networks coexist. By assuming multi-radio user equipment with network-guided operation, the optimal resource allocation for MRA is analyzed as a cross-layer optimization framework with and without fairness consideration to maximize the uplink sum-rate capacity. Numerical results reveal that parallel MRA, which uses MC-CDMA and OFDMA networks concurrently, outperforms the performance of each MC-CDMA and OFDMA network by exploiting the multiuser selection diversity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.246-252
• /
• 2013

This paper presents method to suppress signal interference by using the filter in the RF output stage of the radiation equipment as a way to avoid interference between the RF(Radio Frequency) equipment mounted on aircraft. Especially filter design to suppress harmonics of the radiation equipment and testing method to verify the filter's performance is presented. Filter was installed at RF output stage of U/VHF radio in order to prevent interference between U/VHF(Ultra/Very High Frequency) radio and data link system. Filter design and testing method in this paper will be able to give help in the design of aircraft equipments as a tool that can be used to establish measures for problem of interference in the aircraft.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.132-135
• /
• 2002

In radio communication technology, SDR(Software Defined Radio) technology is emerging as a trendy technology for future. SDR is expected to change existing radio systems including central hardware. SDR is equipment that wireless parameters (frequency, modulation, additional service, power level, receive sensitivity, etc.) are controlled by software. In the world, equipments using the new technology are spreading. Not only equipments being imported but also local manufacturers are making this equipment, developing software and offering upgraded service. In the future, as SDR spreads and users choose the service, diverse equipments will be developed through competition and individual development. This diversity of equipment and services will introduce problems in compatibility and interoperation issues. So the government will have to make technical standard for SDR service and will have to make theses standards available to users and manufacturers alike. Therefore I am investigating the elements that can be used to establish these standards.