• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.1
• /
• pp.117-123
• /
• 2012

This paper implements mobile Worldwide Interoperability for Microwave Access (WiMAX) receiver using Software Defined Radio (SDR) technology. SDR system is difficult to implement on the mobile handset because of restrictions that are computing power and under space constraints. The implemented receiver processes mobile WiMAX software modem on Open Multimedia Application Platform (OMAP) System on Chip (SoC) and Field Programmable Gate Array (FPGA). OMAP SoC is composed of ARM processor and Digital Signal Processor (DSP). ARM processor supports Single Instruction Multiple Data (SIMD) instruction which could operate on a vector of data with a single instruction and DSP is powerful image and video accelerators. For this reason, we suggest the possibility of SDR technology in the mobile handset. In order to verify the performance of the mobile WiMAX receiver, we measure the software modem runtime respectively. The experimental results show that the proposed receiver is able to do real-time signal processing.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.7
• /
• pp.71-78
• /
• 2019

This paper describes a design for a RF receiver to receive satellite digital audio service. The RF receiver designed in this study is a planar structure that is easy to install on the rooftop of a car and is compact in size. In addition, it can be applied to certain commercial models because it has low noise and high gain characteristics. The impedance bandwidth of antenna is 17.8%(415MHz), and the axial ratio is below 3dB as good properties for the bandwidth of 40MHz which is a satellite digital audio service band. Also, it had a broad radiation beamwidth of $95.41^{\circ}$ in H-plane and $117.45^{\circ}$ in E-plane. From the results of the field test of satellite digital audio service reception for the RF receiver, it demonstrated good C/N rate(10.2dB).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.2
• /
• pp.81-91
• /
• 2008

In mobile wireless communications, there is a new approach that uses the lacking spectrum efficiently. A cognitive radio is a device that can changes its transmitter parameters based on interaction with the environment in which it operates. At present, the wireless communication standard for wireless device contains power-saving modes or energy efficient mechanisms which cuts off the power of transmitter and receiver for power-saving. However, in cognitive radio environment, every device has the Quiet Period for searching channel and existing energy-saving method is not appropriate to be adjust to cognitive radio environment. In this paper, we propose an energy-efficient MAC protocol of mobile device in cognitive radio environment and prove the improvement of proposed method.

• Journal of Information Processing Systems
• /
• v.16 no.3
• /
• pp.677-687
• /
• 2020

This paper deals with the electrical shock that can occur in a car wireless charging system. The recently released the Wireless Power Consortium (WPC) standard specifies that the receiver must be protected from the radio power generated by the transmitter and presents two scenarios in which the receiver may be subjected to electrical shock due to the wireless power generated by the transmitter. The WPC also provides a hardware approach for blocking the wireless power generated by the transmitter to protect the receiver in each situation. In addition, it presents the hardware constraints that must be applied to the transmitter and the parameters that must be constrained by the software. In this paper, we analyze the results of the electric shock in the vehicle using the WPC certified transmitter and receiver in the scenarios presented by WPC. As a result, we found that all the scenarios had electrical shocks on the receiver, which could have a significant impact on the receiver circuitry. Therefore, we propose wireless power transfer limit (WPTL) algorithm to protect receiver circuitry in various vehicle charging environments.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.758-769
• /
• 1991

We have investigaed the radio data system which is used for the VHF/FM streo broadcasting system. The RDS system has the I6 important service features which is given by the digital multiplexed modulation method above the FM stereo baseband spectrum. The related cicuit system and general-purpose micro-controller have been applicated for the demodulation and processing of transmitted digital information at the rate of 1187.5bps, and we have developed the receiver system which performs the primary 5 features. The develpoed system has the complete compatibility with the conventional FM-car stereo receiver, we have analyzed the received RDS signal via the hardware implementation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.163-170
• /
• 2011

This study proposed the composition of a new long-code MMSE detector using the pilot channel that demonstrated the most excellent performance under Rayleigh fading in the previous studies. It analyzed and explained how to maintain the stability of the weight vector(introduction to the course of radio waves) in the receiver. In the operation of the receiver system to remove radio interference, the signal vector distortion received in the channel where fading was present achieved good results by compensating for signal errors. When there was distortion, the response characteristics of the received signals were superior to the common matching filter according to the computer simulation. The long-code MMSE receiver proposed in the study was able to prolong the cycle by $16{\times}T_b$ in the fading environment to fulfill the satisfaction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.1-10
• /
• 2010

Impulse Radio Ultra-wideband (IR-UWB) system employing the short pulse has the tolerable characteristics for the multipath environment. The corresponding transceiver with low power consumption can be simply implemented. On the other hand, in the receiver side, the precise channel estimation is required for the knowledge of essence in channel due to the short period of pulse. The estimated gains and delays in channel are used in the rake receiver. The resulting parameters we search have a strong influence on the performance in the entire system. We introduce that the essential parameters can be obtained more precisely through the preamble in receiver side for the channel estimation and related technologies are presented.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.173-174
• /
• 1996

We have mapped $17 deg^2$ region toward Galactic anticenter in $^{12}CO$ J = 1 - 0 using the 3 mm SIS receiver on the 14 m telescope at Taeduk Radio Astronomy Observatory (TRAO). The region mapped in this paper is the first target of the Galactic AntiCenter CO Survey Project (GACCOS) and was selected comparing with IRAS Sky Survey Atlas (ISSA) images at 100${\mu}m$. Molecular emission of the target area is found to be very extended and is well matching with the FIR emission boundary. There are several pieces of clouds, and as some of spectra show several peaks, there seem to be several clouds overlapped in some directions. The Velocity of Local Standard of Rest ($V_{LSR}$) of the CO emission of the mapped region ranges from -20 to +10 km/s. It is also found that the two cloudlets located around I = $180^{\circ}$ have $V_{LSR}$ = -20 km/s, which is very abnormal. The peak antenna temperature of 13 K arises near the H II Region S241.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1040-1044
• /
• 2005

This paper presents a method for the robot localization and calibration using the ultrasonic and the radio frequency. The distance between the receiver and a beacon can be computed by using the difference between times of flight. The presented method uses the gradient of the maximum amplitude of the ultrasonic in order to measure the time of flight precisely. The measured three distances between the receiver and the beacon are used to compute the robot position by the direct inverse method and the iterated least square approximation method. This paper is defined the calibration as the problem to find the location of 3 beacons and 3 robots, and presents 3 methods for it and found the 2B2R method as the best among them.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.8
• /
• pp.770-784
• /
• 1991

In this paper, we have studied the transmission reception method and data structure of the radio data system which was recommendedby EBU. We have develped the novel software that has processing capability of 5 primary features of RDS services, and experimanted the auto-tuning mechanism and LCD display. The developed RDS receiver system has the complete compatibility with the conventional FM car streo system, and we have confirmed the realization validity via the hardware experimentation.