• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8A
• /
• pp.846-851
• /
• 2008

With rapid development of communication industry, the kinds of communication service vary. According to the increasing use of radio waves, the intelligent and effective radio monitoring system needs to be developed, which is replaced for previous radio monitoring system. Next-generation intelligent radio monitoring system based on ITU-R, Rule of wireless facilities, and Radio Waves Act is used, and which can accurately and effectively function as effective radio monitoring system through spectrum analysis of channel power, frequency deviation, offset, and an occupied frequency bandwidth(99% or x-dB), about the analog and digital signal in On-Air of V/UHF bandwidth. Main function of the system has an radio quality measurement, unwanted electromagnetic signals (spurious, harmonic) measurement, high-speed spectrum measurement, frequency usage efficiency investigation, illegal radio exploration, working monitoring, In this paper, we proposes radio quality measurement, high-speed spectrum measurement of next-generation intelligent radio monitoring system.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.69-73
• /
• 2016

In order to derive reliable propagation models for future millimeter-wave frequency indoor pico-cellular communications systems, accurate reflectivity data of building materials is necessary. The broad variety of building materials and construction codes makes accurate attenuation prediction very difficult without the support of specific construction data or measurements. This paper derives a transmission and reflection coefficient based on 13 GHz to 28 GHz measurement data. Transmission and reflection is measured by applying change in the reception angle of each building material, such as plasterboard. The transmission and reflection coefficient derived shows a correlation between frequency dependence and angle. As a result, as the reception angle is reduced, the reflected angle from the transmitter that could be received increases, showing that there is a correlation. In addition, the fundamental investigations carried out lay the foundation for radio channel-related research, which is essential for the development of future millimeter-wave communications systems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.4
• /
• pp.1502-1519
• /
• 2020

Recently, new devices have been developed for the Internet of Things concept. The devices commonly use RF (Radio Frequency) based wireless communication. With the increase in the number of devices, the space allocated for the radio frequency band in wireless communication fills rapidly. Visible Light Communication (VLC) is an alternative, secure and economical communication technology that uses light instead of radio frequencies. While Web of Things (WoT) is the adaptation of the experience and knowledge acquired from the web into the internet of things ecosystems. By combining these two technologies, the development of the Visible Light Communication for Web of Things (VLC4WoT) system, which can use VLC and WoT technologies, has been our motivation. In our study, microcontroller control circuit was created for VLC4WoT system. Control of the circuits over the internet was performed. VLC based receiver and transmitter units have been developed for wireless communication. Web based interface was created for control. The test apparatus consisting of four objects with four outputs and a transfer unit was carried out. In this test, communication was achieved successfully. It was presented in the study that VLC can be used in the web of things architecture. In the future, it is envisaged to use this system as a safe and economical system in indoor environments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.341-342
• /
• 2006

A physical model for reduction of Electromagnetic Interference(EMI) or its predecessors, Radio Noise, Electrical Noise, or Radio-Frequency-Interference(RFI), is a rapidly expanding digital technology. It covers the frequency spectrum from DC to about 3 GHz EMI is the poisoner which does not allow radio, TV, radar, navigation, and a lot of electrical, electro-mechanical, and electronic and communication devices, apparatus and systems to operate compatibly in a common frequency spectrum environment EMI can result in a jammed radio, heart pacer failures, navigation errors and many other either nuisance or catastrophic events. Therefore, it follows that this spectrum pollution problem has reached international levels of concern and must be dealt with m proportion to the safety and economic impact Involved.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.195-196
• /
• 2006

Frame synchronization is an critical factor for an effective operation of OFDM (orthogonal frequency division multiplexing) based communication systems. In this paper, we present and analyze an efficient frame synchronization method based on m-sequence for OFDM-based mobile multimedia communication systems. The cyclic extension preceding OFDM frames is of decisive importance for this method. The m-sequence is added directly to cyclic extension signal in the time domain. By utilizing the autocorrelation characteristics of m-sequence, efficient frame synchronization can be achieved. And we also consider frequency offset estimation simultaneously. The proposed frame synchronization method can be applied to the OFDM-based mobile multimedia communication systems.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.369-373
• /
• 2007

This paper presents an examination of theoretical scattering models for radar cross sections (RCS) of lossy dielectric cylinders, such as exact analytical solution, low frequency approximation (Rayleigh) and high frequency approximation (Physical Optics). The validity regions of the PO and Rayleigh models are closely examined with exact solution in terms of various wavelengths and dielectric constants of a circular cylinder. And also this paper examines the PO and Rayleigh models for back and forward scatter RCS of a cylinder at various incidence angles and polarizations. It was found that the PO and Rayleigh model have their validity regions for estimating the RCS of a circular cylinder.

• Journal of IKEEE
• /
• v.25 no.2
• /
• pp.252-260
• /
• 2021

In this paper, a method of using Software Defined Radio (SDR) is proposed for improving the accuracy of identifying two kinds of signals as Wireless Fidelity (Wi-Fi) signal and Bluetooth signal at the same frequency band of 2.4 GHz based on the time-domain signal characteristic. An SDR device was set up for collecting transmitting signals from Wi-Fi access points (Wi-Fi) and mobile phones (Bluetooth). Different characteristics between Wi-Fi and Bluetooth signals were extracted from the measured result. The SDR device is programmed with a Wi-Fi and Bluetooth detection algorithm and a collision detection algorithm to detect and verify the Wi-Fi and Bluetooth signals based on collected IQ data. These methods are necessary for some applications like wireless communication optimization, Wi-Fi fingerprint localization, which helps to avoid interference and collision between two kinds of signals.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.330-336
• /
• 2011

RFID is the item is at the core of the Internet, promoting action in the online community is a pivotal element. RFID uses radio frequency waves to automatically find the technology to track individuals and items referring to the short-range wireless technology can be included. For example, ZigBee and Bluetooth has a strong ability to track and calculate. In this study, major advances in this technology by analyzing the techniques of intensive discussions, the current progress of mankind, and the impact on the future direction of development is included.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.117-120
• /
• 2009

In this paper, a CR(Cognitive Radio) based on SDR(Software Defined Radio) is the technology combined a method selecting available frequency by recognizing surroundings with a learning algorithm continuously updating basic functions for communication and various environment parameters. Recently, as increasing demands with development of wireless communication service, CR is in the spotlight as technology using frequency resource efficiently. In order to apply CR system to the terminal and implement it, the research field to be preceded can be divided large as a hardware part and a software part. It can be also divided into RF processing and digital signal processing in the hardware part. In this paper, we look over preceding techniques required for applying CR system to the terminal, and research the forms of the terminal when they practically apply to the terminal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.195-201
• /
• 2011

Cognitive radio (CR), which is proposed as a technology that utilizes the frequency resources effectively, has studied to relive scarcity of the frequency resources. CR provides opportunistically under-utilize licensed frequency to the secondary user. However, in the wireless channels, due to the effect of fading and shadowing environments, spectrum sensing performance is compromised. Besides, to detect and classify various CR systems, a novel spectrum sensing algorithm is needed. Therefore, in this paper, we proposed the spectrum sensing algorithm with water marking scheme.