• Journal of the Korean Institute of Navigation
• /
• v.18 no.1
• /
• pp.39-61
• /
• 1994

GMDSS(the Global Maritime Distress and Safety System), which is utilizing recently developed systems such as satellite communications and positioning system, digital communication system, computer and microelectronics technology, etc., has been adopted by International Maritime Orgnization(IMO) and coordina-ted with such organization as the International Telecommunication Union(ITU), World Meteorological Organizatoion(WMO), etc. This system took effect partly on February 1st 1992 according to the 1988 SOLAS Amemdments and, after some more complementary measures, will be fully operational by February 1st 1999. Comparing with the existing communication system, the new system is mainly based on the latest scientific technologies, and therefore overall countermeasure will be necessary to accept the system reasonably. GMDSS will transform the current communication system basically and be the major factor to change the demand and supply of personnel for radio communication. To cope with the system assertively, regulations relating to the radio installation, the posting of radio operators, the bounds of their duty, etc. must be established and the demand and supply of radio operators to meet the system must be accomplished pertinently. Moreover, the technique and quality of the person-nel responsible for the system must be upgraded to carry out the obligations by international regulations as well as to ensure the safety of life and property at sea. Looking into the actual situations of our country, every regulation relating to the GMDSS has been improved, but the concerned educational institutions and administrations have not yet prepared the rational and concrete schemes on the educational methods and adquate procedures for the system. Therefore, in this thesis, the author intends to propose directions for improving the courses and contents of education of the relating educational institutions and to suggest rational schemes for balancing the demand and supply of personnel to the administrative anthorty concerned.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.8
• /
• pp.915-919
• /
• 2014

Since smart phones are widely used globally, the demand for high-speed mobile communications are increasing. To accommodate the increased communication demand, the next-generation mobile communication services such as LTE-Advanced are deployed. In the LTE-Advanced base stations, the base station schemes of Digital Unit (DU) and Radio Unit (RU) are widely used. Here, the link between DU and RU is called fronthaul link. In the current fronthaul link, a digital optical communication interface is used, which is called Common Public Radio Interface (CPRI). However, the CPRI link cannot support the increased mobile traffic efficiently. Therefore, in this paper, we investigate an alternative technology based on the Radio over Fiber (RoF) to accommodate the increased mobile traffic economically.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.77-84
• /
• 2010

This paper aims to implement RAN(Radio Access Network) transmission system that can reduce the transmission cost by installing between mobile base station and base station controller. This system can reduce the number of transmission links by sharing the transmission link that the mobile communication stations of various generation use separately. This also can classify the traffics non-sensitive to delay time, and then transfer them through Ethernet/IP network.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.27-31
• /
• 2011

This paper describes the optimization of spectrum sensing in terms of the throughput of a cognitive radio (CR) system. Dealing with the optimization problem of spectrum sensing, this paper evaluates the throughput of a CR system by considering such situations as the penalty time of a channel search and incumbent user (IU) detection delay caused by a missed detection of an incumbent signal. Also, this paper suggests a serial channel search scheme as the search method for a vacant channel, and derives its mean channel search time by considering the penalty time due to the false alarm of a vacant channel search. The numerical results suggest the optimum sensing time of the channel search process using the derived mean channel search time of a serial channel search in the case of a sensing hardware structure with single radio frequency (RF) path. It also demonstrates that the average throughput is improved by two separate RF paths in spite of the hardware complexity of an RF receiver.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1826-1829
• /
• 2005

Recent advancement in wireless communications and electronics has enabled the development of low power sensor network. Wireless sensor network are often used in remote monitoring control applications, health care, security and environmental monitoring. Wireless sensor networks are an emerging technology consisting of small, low-power, and low-cost devices that integrate limited computation, sensing, and radio communication capabilities. Sensor network platform for health care has been designed, fabricated and tested. This system consists of an embedded micro-controller, Radio Frequency (RF) transceiver, power management, I/O expansion, and serial communication (RS-232). The hardware platform uses Atmel ATmega128L 8-bit ultra low power RISC processor with 128KB flash memory as the program memory and 4KB SRAM as the data memory. The radio transceiver (Chipcon CC1000) operates in the ISM band at 433MHz or 916MHz with a maximum data rate of 76.8kbps. Also, the indoor radio range is approximately 20-30m. When many sensors have to communicate with the controller, standard communication interfaces such as Serial Peripheral Interface (SPI) or Integrated Circuit ($I^{2}C$) allow sharing a single communication bus. With its low power, the smallest and low cost design, the wireless sensor network system and wireless sensing electronics to collect health-related information of human vitality and main physiological parameters (ECG, Temperature, Perspiration, Blood Pressure and some more vitality parameters, etc.)

• Transactions on Semiconductor Engineering
• /
• v.2 no.1
• /
• pp.9-16
• /
• 2024

This paper discusses the design of bio-implanted ultra-low-power MICS RF transceivers for wireless sensor networks. The 400 MHz MICS standard was considered for the implementation of the WBAN wireless sensor system, indirectly minimizing radio propagation losses in the human body and the inference with surrounding networks. This paper includes link budget, various transmission and reception architectures for a system design and ultra-low power transceiver circuit techniques for the implementation of RF transceivers that meet MICS standards.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2014-2020
• /
• 2016

In general, automatic access control management system using smart door-lock must be always exposed to security vulnerability during wireless communication based on Bluetooth. In particular, important information such as a secrete key can be exposed to the attacker when the authentication protocol has been operating in the wireless section. Therefore important information exchanged in the radio section needs to be properly encrypted. In order to analyze security vulnerability for automatic access control management system of public facilities such as subway vent, GNU Radio platform and HackRF device will be considered and experimented. Proposed experimental system to perform software based power analysis attack could be very effectively applied. As a result, important information such as packet type, CRC, length of data, and data value can be easily decoded from wireless packet obtained from HackRF device on GNU Radio platform. Constructed experimental system will be applied to avoid some security problems.

• International Journal of Aeronautical and Space Sciences
• /
• v.1 no.2
• /
• pp.50-67
• /
• 2000

The spacecraft simulator is used for command validation, operational check of the Satellite Operation Subsystem (SOS), spacecraft anomaly analysis support, satellite operator training etc. In this paper, S/W design features and modeling characteristics of the KOMPSAT Spacecraft Simulator Subsystem (SIM) are described. Validation procedures and simulation results are also provided. The SIM provides extensive simulation capabilities by including models for most of the spacecraft subsystems. The software structure of the SIM was designed and implemented so as to support operations not only in real-time but also in non real-time by utilizing the Hewlett Packard (HP) UNIX functions. The SIM incorporates as many user-friendly Man Machine Interface (MMI) windows as possible so that all the SIM normal operations can be executed through the MMI windows.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.9
• /
• pp.1057-1062
• /
• 2014

Vehicular communications can be applied for transmission of various safety messages or Intelligent Transportation Systems(ITS) applications by combining vehicle/road technology with Information and Communication Technology(ICT). In this paper, we represent measurement results of radio characteristics of vehicular communications using IEEE 802.11p based system in urban environments. Radio characteristics are based on the packet error rate (PER) and received spectrum mask. Using measurement results, we discuss implementation issues of vehicular communication systems for supporting reliable services.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1229-1234
• /
• 2010

High quality and high speed multimedia services will be required in the next generation mobile communications. To satisfy these services, powerful error correction techniques are used. ARQ(Auto Repeat Request) techniques, aspects of the throughput, and FEC(Forward Error Correct) techniques have disadvantages in terms of reliability. H-ARQ(Hybrid Auto Repeat Request) systems have been studied extensively as a solution of these disadvantages. In this paper introduce double layer coding and H-ARQ type, proposed H-ARQ system using double layer coding methods. Simulate BER performance and throughput. And we suggest that according to channel condition suitable H-ARQ type.