• 한국구조물진단유지관리공학회 논문집
• /
• 제22권2호
• /
• pp.90-97
• /
• 2018

전자폐기물의 발생량이 급증하고 있고, 전자폐기물로 인한 환경오염 혹은 자원낭비등과 같은 문제를 야기하고 있다. 따라서 전자 폐기물 안에 포함된 중금속을 재활용할 수 있는 기술 개발이 필요하다. 한편, 채움재(콘크리트 혹은 모르타르)는 방사성폐기물의 차폐를 위해 사용되나, 방사성 차폐 성능을 확보한 재료를 적용하고 있지 않다. 따라서 채움재는 차폐성능에 관한 신뢰가 부족한 상황이다. 그러므로 본 연구에서는, 전자폐기물을 채움재의 잔골재로 적용하기 위하여 콘크리트의 역학적 특성을 평가하였다. 실험결과, 압축강도, 휨강도, 탄성계수 및 $1{\mu}m$ 영역의 공극이 상당히 영향을 받는 것으로 나타났으나, 광물질 혼화재를 결합재로 사용하면 성능이 개선되었다. 따라서 전자폐기물은 채움재의 잔골재로써 적용이 가능할 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3051-3058
• /
• 2022

In the present work, untreated Iraqi sand with grain sizes varied between 100 and 200 ㎛ was used to produce a colored glass sample that has shielding features against the low gamma-ray energy. Therefore, a weight of 70-60 wt % sand was mixed with 9-14 wt% B₂O₃, 8-10 wt% Na₂O, 4-6 wt% of CaO, 3-6 wt% Al₂O₃, in addition to 0.3% of Co₂O₃. After melting and annealing the glass sample, the X-ray diffraction spectrometry was applied to affirm the amorphous phase of the fabricated glass samples. Moreover, the X-ray dispersive energy spectrometry was used to measure the chemical composition, and the MH-300A densimeter was applied to measure the fabricated sample's density. The Makishima-Makinzie model was applied to predict the mechanical properties of the fabricated glass. Besides, the Monte Carlo simulation was used to estimate the fabricated glass sample's radiation shielding capacity in the low-energy region between 22.1 and 160.6 keV. Therefore, the simulated linear attenuation coefficient changed between 10.725 and 0.484 cm^-1, raising the gamma-ray energy between 22.1 and 160.6 keV. Also, other shielding parameters such as a half-value layer, pure lead equivalent thickness, and buildup factors were calculated.

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3558-3565
• /
• 2024

The linear attenuation coefficients (LAC) of four soils (Black cotton (S1), Sandy (S2), Clay (S3), and Sandy (S4)) samples were measured at photon energies released from radioisotopes Co⁵⁷ (122 keV), Ba¹³³ (356 keV), ²²Na (511 and 1275 keV), Cs¹³⁷ (662 keV), Mn⁵⁴ (840 keV), and Co⁶⁰ (1330 keV) using a gamma spectrometer includes a NaI (Tl) scintillation detector. The experimental measurements were confirmed utilizing the Monte Carlo N-particle transport code. The linear attenuation coefficient values enhanced from 0.256 cm^-1 to 0.296 cm^-1 (at E_γ of 122 keV), from 0.126 cm^-1 to 0.142 cm^-1 (at E_γ of 662 keV), and from 0.0938 cm^-1 to 0.105 cm^-1 (at E_γ of 1275 keV), raising the (Fe + Mn) concentration from 0.912 wt% to 11.214 wt%, as well as raising the soil samples density from 1.62 g/cm³ to 1.79 g/cm³. The study also shows an enhancement in the half value thickness, transmission factor, radiation protection efficiency and lead's equivalent thickness due to the enrichment of Fe + Mn concentrations within the studied soils. The results show that the Black cotton soil exhibits better shielding properties for γ-ray than the other soils.

• 방사선산업학회지
• /
• 제9권1호
• /
• pp.15-20
• /
• 2015

Carbon fiber has received much attention owing to its properties, including a large surface-to-volume ratio, chemical and thermal stability, high thermal and electrical conductivity, and high mechanical strengths. In particular, magnetic nanopowder dispersed carbon fiber has been attractive in technological applications such as the electrochemical capacitor and electromagnetic wave shielding. In this study, the nickel-oxide-nanoparticle dispersed polyacrylonitrile (PAN) fibers were prepared through an electrospinning method. Electron beam irradiation was carried out with a 2.5 MeV beam energy to stabilize the materials. The samples were then heat-treated for stabilization and carbonization. The nanofiber surface was analyzed using a field emission scanning electron microscope (FE-SEM). The crystal structures of the carbon matrix and nickel nanopowders were analysed using X-ray diffraction (XRD). In addition, the magnetic and electrical properties were analyzed using a vibrating sample magnetometer (VSM) and 4 point probe. As the irradiation dose increases, the density of the carbon fiber was increased. In addition, the electrical properties of the carbon fiber improved through electron beam irradiation. This is because the amorphous region of the carbon fiber decreases. This electron beam effect of PAN fibers containing nickel nanoparticles confirmed their potential as a high performance carbon material for various applications.

• 한국산학기술학회논문지
• /
• 제14권4호
• /
• pp.1871-1876
• /
• 2013

본 연구에서는 평균 입자의 크기가 $1{\sim}500{\mu}m$인 산화비스무스($Bi_2O_3$)와 평균 입자의 크기가 5 ~ 50 nm인 나노 황산바륨($BaSO_4$)을 사용하여 선량저감섬유(DRF; dose reduction fiber, (주)버팔로)를 개발하였다. 개발된 섬유를 시트 형태로 제작한 후 CT 검사시 발생한 산란선에 대한 차폐 특성을 조사하였다. 특성평가는 전리조와 인체 펜텀을 이용한 팬텀실험과 유리선량계를 이용한 임상실험을 병행하여 진행하였다. 임상실험에서는 3개 종합병원 60명의 환자에 대한 흉부 및 두부 CT 검사시 선량저감섬유를 사용하였을 때와 사용하지 않았을 때 안구, 흉부, 복부 및 생식선의 피부 및 심부 선량을 비교하여 차폐효과를 평가하였다. 본 연구를 통하여 개발된 선량저감섬유는 산란선에 의한 두부 및 흉부에 불필요한 피폭선량을 20~50% 정도 저감할 수 있는 것으로 확인되었으며, CT 검사시 본 섬유를 활용한다면 환자 피폭선량을 포함한 국민 총피폭선량 경감에 기여할 수 있을 것이다.

• 방사선산업학회지
• /
• 제17권1호
• /
• pp.119-125
• /
• 2023

Burnup of spent nuclear fuel should be determined accurately for the safety storage of spent nuclear fuel. In this study, a gamma detection system was developed as a part of basic research to measure the burnup of spent nuclear fuel, and its performance was evaluated using a calibration source. The prototype of the gamma detection system was based on a semiconductor sensor using a CZT (Cadmium Zinc Telluride). For quantitative evaluation, tests were conducted using ¹³⁷Cs, ¹³⁴Cs and ²⁵²Cf calibration source. In the performance evaluation, Its field applicability was verified by assessing the energy resolution, the detection linearity and the shielding attenuation according to the nuclide.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.163-170
• /
• 2019

최근 들어, 첨단산업의 발전으로 다양한 종류의 산업폐기물이 빠르게 발생하고 있다. 특히, 산업폐기물 중 중금속을 함유한 고밀도의 폐 브라운관 유리는 재처리 비용과 환경오염 문제로 인해 전량 매립 처분되고 있다. 따라서 이러한 폐자원을 재활용하기 위한 기초 연구가 필요한 실정이다. 이에 본 연구에서는 중금속이 함유된 CRT 폐유리를 잔골재로 대체한 모르타르 시험체의 기초 물성과 방사선 차폐 성능을 분석하여 차폐 재료로의 활용성을 평가하였다. 연구 결과에 따르면 중금속을 함유한 CRT 폐유리를 잔골재로 대체한 시험체의 겉보기 밀도가 상승하였으며, 압축강도와 휨강도는 저하되는 현상을 나타냈다. 또한, 납 성분이 다량 함유된 폐유리 대체 시험체는 일반 모르타르 시험체보다 저에너지의 차폐 성능이 상승하는 효과를 보였으며, $122KeV{\cdot}^{57}Co$ 방사선원에 대해서는 일반 모르타르 시험체보다 2.5배 높은 선형감쇠계수를 나타냈다.

• Nutrition Research and Practice
• /
• 제12권1호
• /
• pp.41-46
• /
• 2018

BACKGROUND/OBJECTIVES: Exposure of the normal lung tissue around the cancerous tumor during radiotherapy causes serious side effects such as pneumonitis and pulmonary fibrosis. Radioprotectors used during cancer radiotherapy could protect the patient from side effects induced by radiation injury of the normal tissue. Delphinidin has strong antioxidant properties, and it works as the driving force of a radioprotective effect by scavenging radiation-induced reactive oxygen species (ROS). However, no studies have been conducted on the radioprotective effect of delphinidin against high linear energy transfer radiation. Therefore, this study was undertaken to evaluate the radioprotective effects of delphinidin on human lung cells against a proton beam. MATERIALS/METHODS: Normal human lung cells (HEL 299 cells) were used for in vitro experiments. The 3-[4,5-dimethylthiazol-2-yl]-2,5 diphenyl tetrazolium bromide (MTT) assay assessed the cytotoxicity of delphinidin and cell viability. The expression of radiation induced cellular ROS was measured by the 2'-7'-dicholordihydrofluorescein diacetate assay. Superoxide dismutase activity assay and catalase activity assay were used for evaluating the activity of corresponding enzymes. In addition, radioprotective effects on DNA damage-induced cellular apoptosis were evaluated by Western blot assay. RESULTS: Experimental analysis, including cell survival assay, MTT assay, and Western blot assay, revealed the radioprotective effects of delphinidin. These include restoring the activities of antioxidant enzymes of damaged cells, increase in the levels of pro-survival protein, and decrease of pro-apoptosis proteins. The results from different experiments were compatible with each to provide a substantial conclusion. CONCLUSION: Low concentration ($2.5{\mu}M/mL$) of delphinidin administration prior to radiation exposure was radioprotective against a low dose of proton beam exposure. Hence, delphinidin is a promising shielding agent against radiation, protecting the normal tissues around a cancerous tumor, which are unintentionally exposed to low doses of radiation during proton therapy.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3506-3513
• /
• 2023

In this paper, we demonstrate the neutron attenuation of dry cask shielding materials using the S670e helium-4 detector manufactured by Arktis Radiation Ltd. In particular, two materials expected to be applied to the TN-32 dry cask manufactured by ORANO Korea and KORAD-21 by the Korea Radioactive Waste Agency (KORAD) were utilized. The measured neutron attenuation was compared with our Monte Carlo N-Particle Transport simulation results, and the difference is given as the root mean square (RMS). For the fast neutron case, a rapid decline in neutron counts was observed as a function of increasing material thickness, exhibiting an exponential relationship. The discrepancy between the experimentally acquired data and simulation results for the fast neutron was maintained within a 2.3% RMS. In contrast, the observed thermal neutron count demonstrated an initial rise, attained a maximum value, and exhibited an exponential decline as a function of increasing thickness. In particular, the discrepancy between the measured and simulated peak locations for thermal neutrons displayed an RMS deviation of approximately 17.3-22.4%. Finally, the results suggest that a minimum thickness of 5 cm for Li-6 is necessary to achieve a sufficiently significant cross-section, effectively capturing incoming thermal neutrons within the dry cask.

• 대한금속재료학회지
• /
• 제49권9호
• /
• pp.720-725
• /
• 2011

W-Ni-Fe heavy alloys have been used in various fields, such as kinetic energy penetrators and radiation shielding materials, due to their high density and good mechanical properties. In this study, the sintering of W-Ni-Fe alloys with various Ni/Fe ratios was demonstrated to improve the mechanical properties and penetration capabilities of heavy alloys by formation of interfacial phase. The microstructural changes and the mechanical properties of the W-Ni-Fe alloys after liquid-phase sintering were investigated. The Vickers hardness and tensile strength of the 95W1.3Ni3.7Fe sample, which had coated W grains by $Fe_7W_6$ phase (${\mu}$-phase), were 450 Hv and 1560 MPa, respectively. As a result, enhancement of the mechanical properties was considered to have uniformly generated ${\mu}$-phase around W grains.