• Title/Summary/Keyword: Radiation sensor

검색결과 426건 처리시간 0.033초

곡물선별기의 선별력 향상을 위한 근거리적외선 영상보드 개발 (Development of Near Infrared Radiation Image Board for Performace Improvement of Grain Sorter)

  • 이채욱
    • 융합신호처리학회논문지
    • /
    • 제18권1호
    • /
    • pp.25-30
    • /
    • 2017
  • 현재 곡물선별기는 대부분 CCD 광학카메라를 이용하여 불량품을 찾아내고 있다. 본 논문에서는 CCD 카메라를 이용함과 동시에 근거리적외선 센서의 수분측정 방법을 추가하여 곡물선별기의 선별력향상을 목표로 한다. 그리고 구현한 알고리즘을 곡물선별기에 실제로 적용할 수 있도록 근거리적외선 영상보드 시스템을 개발하여, 원료의 내부 수분 함량을 고속으로 체크하여 일정함량 미달인 경우 불량으로 간주하여, 불량품을 실시간으로 제거하는 곡물선별기 시스템을 개발하고자 한다.

  • PDF

MOSFET 선량계를 이용한 In-vivo 선량의 확인 (In-vivo Dose verification using MOSFET dosimeter)

  • 강대규;이광만
    • 센서학회지
    • /
    • 제15권2호
    • /
    • pp.102-105
    • /
    • 2006
  • In-vivo dosimetry is an essential tool of quality assurance programs in radiotherapy. The most commonly used techniques to verify dose are thermoluminescence dosimeter (TLD) and diode detectors. Metal oxide semiconductor field-effect transistor (MOSFET) has been recently proposed for using in radiation therapy with many advantages. The reproducibility, linearity, isotropy, dose rate dependence of the MOSFET dosimeter were studied and its availability was verified. Consequently the results can be used to improve therapeutic planning procedure and minimize treatment errors in radiotherapy.

광섬유 코팅 재료에 따른 펨토초 레이저 가공 FBG 센서의 방사선 영향 (Gamma-Radiation Effects of Femtosecond Direct-writing Fiber Bragg Gratings on Optical Fiber Coating Materials)

  • 김종열;이남호;손익부
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 춘계학술대회
    • /
    • pp.638-640
    • /
    • 2018
  • 본 논문에서는 800nm급 펨토초 레이저를 이용하여 FBG 센서를 제작하였다. 제작된 센서는 누적 방사선량 100kGy 감마선에 조사하였고, 광섬유 코팅재료에 따른 방사선 영향을 평가하였다.

  • PDF

마이크로프로세서를 사용한 UV/IR 불곶 감지기 (UV/IR flame detector using Microprocessor)

  • 박성진;임병현;임종연;김명원;윤길호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.215-218
    • /
    • 2001
  • A flame detector responds either to radiant energy visible to the human eye or outside the range of human vision. Such a detector is sensitive to glowing embers, coals, or flames which radiate energy of sufficient intensity and spectral quality to actuate the alarm. An infra-red detectors can respond to the total IR component of the flame alone or in combination with flame flicker in the frequency range of 5 to 30 Hz. A major problem in the use of infrared detectors receiving total IR radiation is the possible interference of solar radiation in the infrared region. When detectors are located in places shielded from the sun, such as vaults. filtering or shielding the unit from the sun's rays is unnecessary. In this study, we proposed method for redue a false alarm with using filtering & sensor technology for distinguish of causes of raise a false alarm and pure flame.

  • PDF

영상처리기반 스테레오 감마선 탐지장치의 고속탐지에 관한 연구 (The Study for the Fast Detection of the Stereo Radiation Detector using the Image Processing)

  • 황영관;이남호
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2015년도 추계학술대회
    • /
    • pp.1103-1105
    • /
    • 2015
  • 원전이나 방사선 관련시설에서의 사고발생 또는 노후원전 해체시 누출된 방사능은 조기에 탐지 및 제거해야 대형사고를 방지할 수 있다. 본 논문에서는 방사선원의 빠르고 효율적인 제염작업을 위해 방사선원에 대한 거리, 방향 및 선량정보를 제공할 수 있는 단센서 기반의 스테레오감마선 탐지장치를 구현하였고, 탐지장치의 고속탐지를 위한 알고리즘개발을 수행하였다. 선원에 대한 거리정보를 획득하기 위한 스테레오 구조를 위해 2대의 탐지장치가 필요하지만 장치의 운용을 위하여 단센서 기반의 경량화된 탐지장치를 고안하였고, 스테레오 영상 획득시 탐지시간을 최소화 하기 위하여 관심영역을 추출한 후 해당 영역에 대한 스캔을 통해 탐지 선원에 대한 거리산출 및 영상분포출력을 나타내도록 하였다. 스테레오 획득 시 탐지시간을 기준으로 적용된 알고리즘의 탐지시간은 최대 35%의 시간단축결과를 확인하였다.

  • PDF

치료방사선 Portal Image를 위한 다이오드 방사선 센서의 특성에 관한 연구 (A Study on Characteristics of A Diode Radiation Sensor for Portal Image of Therapy Radiation)

  • 이동훈;권장우;홍승홍
    • 센서학회지
    • /
    • 제5권5호
    • /
    • pp.11-20
    • /
    • 1996
  • 본 연구에서는 가속기에서 발생하는 치료방사선을 방사선원으로 사용하여 다이오드 치료방사선 검출센서의 특성을 조사하였다. 방사선량에 따른 선형성, 재현성, 오차율, 에너지의존성, 방사선조사후의 감도변화량, 다이오드의 숫자에 따른 출력값 측정 및 Portal 영상을 위한 가능성 검사를 위해서 핵계측기를 이용한 펄스 성형(成形)을 시도하였다. 제작된 시스템의 효율성을 검증하기 위하여 구성된 다이오드 센서로 조사야(照射野)별 심부량(深部量)를 백분율을 기존의 측정장치인 기체 전리함을 이용한 값과 상호 비교하여 보았다. 또한 다이오드의 선량측정회로를 다채널로 구성하여 A/D 변환후 컴퓨터 상에서 치료영역의 범위를 읽을 수 있었다. 모형인체(模型人體)를 치료대 위에 놓고 읽은 출력값과 모형인체(模型人體)없이 직접 읽은 출력값을 비교하여 Portal 영상을 위한 가능성을 제시하여 보았다.

  • PDF

동 팬텀과 초음파 센서를 이용한 호흡운동 조절 방사선치료 기술 개발 (Development of Respiration Gating RT Technique using Moving Phantom and Ultrasound Sensor: a feasibility study)

  • 이석;이상훈;신동호;양대식;최명선;김철용
    • Radiation Oncology Journal
    • /
    • 제22권4호
    • /
    • pp.316-324
    • /
    • 2004
  • 목적 : 간 등의 상 복부에 위치한 종양의 방사선 조사 체적은 호흡에 의한 종양의 이동을 포함하기 때문에 방사선 조사 체적이 증가되어 방사선 독성 및 정상조직 선량이 증가하게 된다. 이러한 문제점을 극복하기 위해 동 팬텀과 초음파센서를 이용하여 호흡운동에 의한 환자 체표면의 움직임을 획득하고, 획득한 데이터의 역 값을 이용해 환자침대를 조절해줄 수 있는 호흡운동 조절 방사선치료 기술을 개발하고자 한다. 대상 및 방법 : 호흡운동에 의한 환자 체표면의 움직임을 평가하기 위해 제작한 팬텀은 조정기(BS II, 20 Mhz, 8K Byte), 센서(Ultra-Sonic, range $3\~3$ m), Computer (RS232C), Sewo Motor (Torque 2.3 Kg) 등으로 구성하였고, 제어와 구동을 위한 획득-보정-분석 프로그램을 작성하였다. 최대 2 cm 범위 내에서 팬텀을 움직이게 하였고, 팬텀의 움직임과 보정이 순차적으로 일어나도록 프로그램하였으며, x, y, z가 연속적으로 움직이도록 구성하였다. 임의의 움직임 데이터(유격이 2 cm이 되도록 하여 3차원 데이터 형태)를 입력하여 동 팬텀을 조정하고, 동시에 팬텀 움직임을 초음파 센서를 이용하여 획득한 후, 두 데이터간의 비교, 분석을 시행하였다. 이후 쥐(Guinea-pig, about 500g)를 이용하여 호흡운동에 의한 환자 체표면의 움직임을 획득한 후 획득한 데이터의 역 값으로 팬텀을 구동시킴으로써 실시간 호흡운동 조절 방사선치료 기술을 평가하였다. 결과 : 팬텀 실험에서 3 차원 입력데이터에 대한 팬텀 보정 데이터간의 정확성을 시간에 대한 거리 값으로 비교한 결과 ${\pm}1\%$ 이내의 정확성을 알 수 있었고, 이에 필요한 보정시간은 $2.34{times}10^{-4}$초임을 알 수 있었다. 또한 동물 실험에서도 동일한 방법으로 시간에 대한 거리 그래프와 획득-보정간의 지연 시간 등을 분석한 결과 팬텀 데이터와 같은 결과를 얻을 수 있었다. 결론 : 팬텀, 동물 실험 모두에서 시간에 대한 거리 값과 각각의 경우에 획득-보정간의 지연 시간을 분석한 결과 데이터 값은 ${\pm}1\%$ 이내에서 일치하였으며, 데이터 획득-보정 지연 시간은 2.34H10-4 초 이내 즉, 실시간으로 얻을 수 있어 새로운 호흡운동 조절 방사선치료 기술의 임상적용에의 가능성을 확인할 수 있었다.

Feasibility study on fiber-optic inorganic scintillator array sensor system for multi-dimensional scanning of radioactive waste

  • Jae Hyung Park;Siwon Song;Seunghyeon Kim;Jinhong Kim;Seunghyun Cho;Cheol Ho Pyeon;Bongsoo Lee
    • Nuclear Engineering and Technology
    • /
    • 제55권9호
    • /
    • pp.3206-3212
    • /
    • 2023
  • We developed a miniaturized multi-dimensional radiation sensor system consisting of an inorganic scintillator array and plastic optical fibers. This system can be applied to remotely obtain the radioactivity distribution and identify the radionuclides in radioactive waste by utilizing a scanning method. Variation in scintillation light was measured in two-dimensional regions of interest and then converted into radioactivity distribution images. Outliers present in the images were removed by using a digital filter to make the hot spot location more accurate and cubic interpolation was applied to make the images smoother and clearer. Next, gamma-ray spectroscopy was performed to identify the radionuclides, and three-dimensional volume scanning was also performed to effectively find the hot spot using the proposed array sensor.

Development of a wireless radiation detection backpack using array silicon-photomultiplier (SiPM)

  • Kim, Jeong Ho;Back, Hee Kyun;Joo, Koan Sik
    • Nuclear Engineering and Technology
    • /
    • 제52권2호
    • /
    • pp.456-460
    • /
    • 2020
  • In this research, a radiation detection backpack to be used discreetly or by a wide range of users was developed using array silicon-photomultiplier (SiPM) and CsI (Tl), and its characteristics were evaluated. The R-squared value, which indicates the responsiveness of a detector based on the signal intensity, was determined to be 0.981, indicating a good linear responsivity. The energy resolutions for gamma radiation energies of Co-57 (122 keV), Ba-133 (356 keV), Cs-137 (662 keV), and Co-60 (1332 keV) were found to be 13.40, 10.50, 6.77, and 3.16%, respectively. These results confirm good energy resolution characteristics. Furthermore, in the case of mixed sources, the gamma radiation peaks were readily distinguishable, and the R-squared value for energy linearity was calculated to be 0.999, demonstrating an exceptional energy linearity. Further research based on the results of this study would enable the commercialization of lightweight SiPM-based wireless radiation detection backpacks that can be used for longer durations by replacing the photomultiplier tube, which is mainly used as the optical sensor in existing radiation detection backpacks.