• 방사선산업학회지
• /
• 제5권3호
• /
• pp.267-272
• /
• 2011

This study evaluated the microbial population (total aerobic count, fungi) and organoleptic quality of freeze-dried bibimbap sterilized by gamma irradiation to develop the space food. An irradiation dose above 30 kGy was needed to sterilize the freeze-dried bibimbap, while organoleptic quality of the sample was significantly decreased by irradiation (p<0.05). However, it was observed that scores on overall acceptance of rehydrated bibimbap after irradiation were the highest, when vitamin C and paprika extract were added at 0.1%, respectively. Therefore, it was considered that the freeze-dried bibimbap could be developed as a space food, which meet microbial requirements and organoleptic quality through addition of vitamin C 0.1% and paprika extract 0.1% before gamma irradiation at 30 kGy.

• 한국산림과학회지
• /
• 제99권5호
• /
• pp.750-754
• /
• 2010

Among the environmental conditions employed in micropropagation, light quality plays an important role in growth, specially morphogenesis and photosynthesis. The effect of radiation quality (350-740 nm) on the development and growth of zygotic embryos and in vitro plantlets of open-pollinated chestnut (Castanea crenata S. et Z.) were studied. Two types of explants were exposed for 4 weeks to cool white (W, as control), monochromatic red (R, peak emission 650 nm), monochromatic blue (B, peak emission 440 nm), red+blue (R+B, 1:1), or red+far-red (R+Fr, 1:1, far-red peak emission 720 nm) radiation from a light-emitting-diode (LED) system. While the zygotic embryos showed positive photoblastic behavior, their germination was inhibited by blue radiation. Hypocotyl elongation and root development were promoted by red radiation. The emergence of primary leaf and its expansion were faster under blue than under red radiation. In the plantlets, red and red+far-red radiation significantly increased the formation and growth of the root, whereas blue light reduced rooting. Therefore, radiation quality appears to influence some steps in the development of zygotic embryos and plantlets in the chestnut.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.37-43
• /
• 2013

We examined the forage quality to provide the basic information for the utilization of blackberry by-products (leaf and stem) among thirty-five mutant lines derived from gamma-ray. The leaves had higher crude protein (CP) contents than stems. In addition, the leaves showed broad ranges of variation in crude fat, crude fiber and crude ash. The overall forage quality of the stems were similar to those of the original variety. The mean of neutral detergent fiber (NDF) content of leaves and stems in mutant lines were 25.88% and 58.98%, respectively. Also, the mean of acid detergent fiber (ADF) content of leaves and stems in mutant lines were 15.43% and 49.27%, respectively. Forage quality grades of all blackberry leaf were special quality class. However, the blackberry stem ranked $1^{st}$ to $5^{th}$ in quality class. The stem diameter was negatively ($P{\leq}0.05$) correlated with the moisture and crude protein. Also, the fruit length was highly negatively ($P{\leq}0.01$) correlated with the RFV (relative feed value) in blackberry leaf. The one hundred fruit weight was highly negatively ($P{\leq}0.01$) correlated with the crude ash. Based on these results, the by-products of blackberry could provide high quality forage for feeding of live stock.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.63.2-63.2
• /
• 2010

Solar radiation data are used in several forms and for a variety of purposes. The most detailed information we have is beam and diffuse solar radiation on a horizontal surface, by hours, which is useful in simulations of solar processes. Daily data are more often available and monthly total solar radiation on horizontal surface can be used in some process design methods. However, as performance is generally not linear with solar radiation, the use of average may lead to serious errors if non-linearities ara not taken into account. It is also possible to reduce radiation data to more manageable forms by statistical methods. The control of the quality of most measurements is relegated to the control of the measuring instruments and measuring processes themselves. An accurate measurement will usually result from the use of a high-quality instrument that has been accurately calibrated and is properly used by a qualified individual.

• Imaging Science in Dentistry
• /
• 제52권3호
• /
• pp.283-288
• /
• 2022

Purpose: This study was conducted to measure the radiation exposure and image quality of various cone-beam computed tomography (CBCT) machines under common clinical conditions and to analyze the correlation between them. Materials and Methods: Seven CBCT machines used frequently in clinical practice were selected. Because each machine has various sizes of fields of view (FOVs), 1 large FOV and 1 small FOV were selected for each machine. Radiation exposure was measured using a dose-area product (DAP) meter. The quality of the CBCT images was analyzed using 8 image quality parameters obtained using a dental volume tomography phantom. For statistical analysis, regression analysis using a generalized linear model was used. Results: Polymethyl-methacrylate (PMMA) noise and modulation transfer function (MTF) 10% showed statistically significant correlations with DAP values, presenting positive and negative correlations, respectively (P<0.05). Image quality parameters other than PMMA noise and MTF 10% did not demonstrate statistically significant correlations with DAP values. Conclusion: As radiation exposure and image quality are not proportionally related in clinically used equipment, it is necessary to evaluate and monitor radiation exposure and image quality separately.

• Fisheries and Aquatic Sciences
• /
• 제18권2호
• /
• pp.115-121
• /
• 2015

This study was conducted to confirm quality properties of sterilized Ganjang-gejang (marinated crab Portunus trituberculatus) with Korean soy sauce using by gamma irradiation and to improve quality of sterilized Ganjang-gejang. The Ganjang-gejang was irradiated at dose of 3, 6, 9, 12, and 15 kGy by gamma irradiation and there was evaluated in microbiological, physicochemical, and sensory properties. Total aerobic bacteria and fungi contents of non-irradiated samples were about 6 and 4 log CFU/g level, respectively. Gamma-irradiated samples at above 9 kGy did not contain aerobic bacteria or fungi at detection limit less than 2 log CFU/g, but sensory scores were significantly decreased depending on the irradiation dose. To improve the sensory qualities of gamma-irradiated Ganjang-gejang, the temperature was adjusted during sample irradiation. When samples were irradiated under freezing temperatures, especially on dry ice, the TBARS and the deterioration of sensory qualities of Ganjan-Gejang were reduced. Different odor patterns were observed among samples, as observed using electronic nose analysis system. The results of this study indicated that treatment with irradiation under low temperatures may help to preparing high-quality Ganjang-gejang.

• Imaging Science in Dentistry
• /
• 제54권2호
• /
• pp.159-169
• /
• 2024

Purpose: The aim of this study was to evaluate the influence of different cone-beam computed tomography (CBCT) acquisition protocols on reducing the effective radiation dose while maintaining image quality. Materials and Methods: The effective dose emitted by a CBCT device was calculated using thermoluminescent dosimeters placed in a Rando Alderson phantom. Image quality was assessed by 3 experienced evaluators. The relationship between image quality and confidence was evaluated using the Fisher exact test, and the agreement among raters was assessed using the kappa test. Multiple linear regression analysis was performed to investigate whether the technical parameters could predict the effective dose. P-values<0.05 were considered to indicate statistical significance. Results: The optimized protocol (3 mA, 99 kVp, and 450 projection images) demonstrated good image quality and a lower effective dose for radiation-sensitive organs. Image quality and confidence had consistent values for all structures (P<0.05). Multiple linear regression analysis resulted in a statistically significant model. The milliamperage (b=0.504; t=3.406; P=0.027), kilovoltage peak (b=0.589; t=3.979; P=0.016) and number of projection images (b=0.557; t=3.762; P=0.020) were predictors of the effective dose. Conclusion: Optimized CBCT acquisition protocols can significantly reduce the effective radiation dose while maintaining acceptable image quality by adjusting the milliamperage and projection images.

• 한국식품저장유통학회지
• /
• 제15권1호
• /
• pp.144-149
• /
• 2008

본 연구는 청국장의 관능적 품질개선을 위해 초의차(불발효차)의 첨가량을 달리하여 청국장의 발효기간 중 이화학적, 관능적 품질특성 및 미생물균수 측정을 실시하였다. 초의차 첨가량이 증가할수록 발효미생물 생육이 지연되었고 pH 및 휘발성염기태 질소 함량은 초의차 첨가량 증가에 따라 감소하였다. 초의차 첨가 청국장의 색도측정에서 명도(L) 및 적색도(a)가 유의적으로 감소하였고, 그 결과 초의 차가 첨가된 모든 실험구들의 외관에 대한 선호도는 무첨가 대조구에 비해 낮았다. 또한 3%까지 초의차를 첨가할수록 이취개선 효과로 인해 향, 맛, 종합적 기호도가 증가하였으며, 3% 초의차 첨가 청국장의 항산화활성은 대조구에 비해 유의적으로 높게 나타났다. 이상의 결과를 통해 청국장의 관능적 품질이 3%의 초의차 첨가에 의해 개선된 것으로 판단되었다.

• 한국의학물리학회지:의학물리
• /
• 제21권1호
• /
• pp.99-112
• /
• 2010

국내에서 방사선치료를 위한 선형가속기 품질관리 프로토콜은 많이 개발되어 왔지만 선형가속기를 기반으로 하는 방사선수술장비의 품질관리 프로토콜 개발은 현재까지 거의 이루어져 있지 않고 있다. 이에 본 연구는 선형가속기 기반 일체형 방사선수술장비인 노발리스의 정확도 및 정밀도를 유지하기 위하여 일간, 주간, 월간, 연간에 주기적으로 시행하여야 하는 노발리스 품질관리 프로토콜을 개발 하고 품질관리 상태의 종합적 확인을 할 수 있는 해부학적 팬텀을 제작하였다. 이를 위하여 국내외의 선형가속기를 이용하는 방사선수술 품질관리 프로토콜의 수집 및 분석을 통해 필수적인 품질관리항목과 각 항목의 허용치를 정하였다. 노발리스 품질관리 항목은 기계적 정확도 부분과 방사선 전달 부분의 2가지로 분리하고 기계적 정확도 부분은 방사선발생 장치부, 보조장치부, 그리고 미세다엽 시준기부의 3가지 부분으로 방사선 전달부분은 치료 중심점 평가와 선량학적 평가의 2가지 부분으로 나누어 작성하였다. 최종적으로 노발리스 품질관리 유지를 위하여 시행하여야 하는 일간, 주간, 월간, 연간의 노발리스 품질관리 항목 표를 완성하였다. 완성된 노발리스 품질관리항목 표는 노발리스가 방사선수술에 적합한 정확도 및 정밀도를 유지하는데 필요한 지표로서 기여 할 수 있을 것이라 생각된다.

• Journal of Radiation Protection and Research
• /
• 제19권1호
• /
• pp.37-50
• /
• 1994

X-선과 감마선의 에너지에 따른 선질특성과 선량 및 필름의 사진농도와의 관계를 이용한 필름배지선량계의 선량환산식을 실험적으로 체계화 하였고, 시간경과에 따른 잠상퇴행 특성과 방사선의 입사방향에 따른 방향특성을 실험적으로 조사하여 보정계수를 산출하였다. 본 연구에서 구한 선량환산식은 필름배지선량계의 기술기준인 성능판정 기준을 잘 만족시키는 것으로 나타났다.