• 제목/요약/키워드: Radiation pressure

검색결과 681건 처리시간 0.036초

의복의 보호론에 관한 이론적 고찰 (Comparative Study on the Protective Functions of Clothes)

  • 임숙자
    • 한국의류학회지
    • /
    • 제9권3호
    • /
    • pp.71-78
    • /
    • 1985
  • This research is designed to systemize the protection theory as well as to supplement the missing theory by organizing various studies on the protective functions of celothes by domestic and foreign scholers of clothing. Human environments is classified two standpoints : (1) Physical environments, and (2) man built psychological environments including socio-physical environments, socio-biological environments, behavioral environments, socio-psychological environments and institution environments. Clothes acting as a physical protection might be of (1) extreme air temperature: Parka; (2) high relative humidity: raincoat; (3) air movement: windbreaker; (4) radiation: space suit; (5) atmospheric pressure: deep sea diver suit; (6) mechanical agent: bullet proof vest; (7) physical agent: (8) chemical agent: (9) biological agent: surgeon's gown, cap, and mask. Also dresses act to support the body comfort, health and the well-being; corset for bad back patient, wrist band for people with weak wrist, bottom half of pressure suit for people with low blood pressure. Clothes acting as a psychological protection might be of (1) influence of magic and of spirits: (2) moral danger; (3) the general unfriendliness of the world as a whole; a reassurance against the lack of love. Clothes should provide the maximum of satisfaction in accordance with the full recognition of reality. The reality should aim at the formulation of general laws concerning the most pleasing forms, colors, and styles to suit. The complex physiological anatomical and psychological aspects of individual personalities.

  • PDF

광학특성을 이용한 고체추진제 점화특성 연구 (The study of ignition characteristics of solid propellant using Arc Image Furnace)

  • 유지창;김인철;정정용;이경주
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제28회 춘계학술대회논문집
    • /
    • pp.225-228
    • /
    • 2007
  • 본 연구는 로켓 모타의 추진제 점화 특성을 살펴보는 데 그 목적이 있으며 아크 이미지 고온 오븐을 사용하여 혼합형, 복기 그리고 니트라민 추진제를 대상으로 압력 변화에 따라서 점화지연시간을 측정하였다. 추진제 표면의 반사에너지를 측정하기 위해 광섬유 표면 반사계를 사용하였다. 추진제 점화성은 복기 추진제 > 혼합형 추진제 > 니트라민 추진제 순이었으며, 니트라민 추진제 점화에 가장 큰 점화 에너지가 필요했으나 압력이 $75{\sim}400$ psia 범위로 상승함에 따라 점화 지연 시간은 급격히 감소하였다. 소량의 오페시화이어를 첨가함으로써 흡수도를 증가시킬 수 있었다.

  • PDF

Performance evaluation of bubble pump used on solar water heating system

  • Xuesong, Li;Park, Gi-Tae;Kim, Pil-Hwan;Chung, Han-Shik;Jeong, Hyo-Min
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2007년도 동계학술발표대회 논문집
    • /
    • pp.416-422
    • /
    • 2007
  • The application analysis of bubble pump on the domestic solar water heater system is presented. The system investigated in this study is a passive device, self pumping and self regulating. It was test to use the bubble pump on solar water heater system. The test experiment has been taken on the existed vacuum tube about the efficiency, working fluid temperature and pressure and circulated power. In order to check the working temperature and working pressure effectively, the bubble pump was test separated from the solar water heater. The equipment consists of the bubble pump, heater and heat exchanger. The main structure of bubble pump was design depend on the character of two phase flow. The complete system was instrumented to measure pressures, temperatures and their relationship with the solar radiation intensity. The theory analysis of design bubble pump has been given and the experiment result analysis has been included in the paper.

  • PDF

물유리와 이산화탄소로 가압함침한 가문비 나무의 연소특성 (Combustion Characteristics of Spruce Wood by Pressure Impregnation with Waterglass and Carbon Dioxide)

  • 박형주;이세명
    • 한국화재소방학회논문지
    • /
    • 제26권4호
    • /
    • pp.18-23
    • /
    • 2012
  • 이산화탄소 주조법에서 사용되고 있는 방법을 응용하여 목질내에 규산겔과 탄산소다, 이산화규소가 석출된 목재를 제조한 후 외부 복사열원(20, 25, 35 및 50 $kW/m^2$)에 따른 점화시간, 점화온도, 질량감소속도, 임계열유속을 측정하였다. 연구결과, 물유리와 이산화탄소를 이용한 가압함침 처리된 목재는 Pre-Flashover 단계에서의 복사열원(20 $kW/m^2$ 이하)에서 난연성능이 있음을 확인할 수 있었다. 향후 지속적인 연구를 통해 우수한 배합비율을 찾는다면 난연목재로서의 활용가능성이 있다고 판단된다.

좌측 유방암 방사선치료에서 CPAP(Continuous Positive Airway Pressure)의 유용성 평가 (The efficacy of continuous positive airway pressure (CPAP) for patient with left breast cancer)

  • 정일훈;하진숙;장원석;전미진;김세준;정진욱;박별님;신동봉;이익재
    • 대한방사선치료학회지
    • /
    • 제31권2호
    • /
    • pp.43-49
    • /
    • 2019
  • 목 적: 본 연구는 좌측 유방암 방사선치료에서 환자 호흡방법에 따른 영향에 대하여 치료계획을 통해 비교 분석하고, 깊은 들숨 호흡 정지법(deep inspiration breath hold, DIBH)에서 지속적 기도 양압(continuous positive airway, CPAP)의 유용성을 평가하고자 하였다. 대상 및 방법: 좌측 유방암 환자 총 10명을 대상으로 하였다. 모의치료에서 총 세 가지 호흡법을 적용하여 영상을 획득하였다: 자유호흡법(free breathing, FB); 깊은 들숨 호흡 정지법(DIBH); 들숨 호흡 정지법(inspiration breath hold, IBH); 여기서 DIBH에서는 자가호흡확인 기구인 abches(APEX, Japan)와 IBH에서는 CPAP가 적용되었다. 치료계획은 Ray Station(5.0.2.35, Sweden)을 이용하였고, 용적 강도변조 회전방사선치료법(volumetric modulated arc therapy, VMAT) one partial Arc을 환자당 동일 각도로 적용하였다. 치료계획용적(planning target volume, PTV)의 총 처방선량은 50Gy(2Gy/fx)로 설정하였다. 치료계획분석은 PTV의 95% dose(D95), 처방선량지수(conformity index, CI)와 선량균질지수(homogeneity index, HI)를 비교 분석하였다. 손상위험장기(Organ At Risk, OAR)인 폐, 심장, 왼내림 앞가지동맥(left anterior descending artery, LAD)을 분석하였다. 결 과: 동축의 폐(ipsilateral lung)의 평균용적 FB, DIBH(Abches), IBH(CPAP)에서 각각 1245.58±301.31㎤, 1790.09±362.43㎤, 1775.44±476.71㎤였다. PTV의 평균 D95는 각각 46.67±1.89Gy, 46.85±1.72Gy, 46.97±2.34Gy였다. 평균 CI(HI)는 각각 0.95±0.02(0.91±0.01), 0.96±0.02(0.90±0.01), 0.95±0.02(0.92±0.02)였다. 폐 전체의 V20(동측 폐)은 각각 10.74±4.50%(20.45±8.65%), 8.29±3.14%(17.18±7.04%), 9.12±3.29%(18.85±7.85%)였다. 심장의 평균 선량(Dmean)은 각각 7.82±1.27Gy, 6.10±1.27Gy, 5.67±1.56Gy였다. LAD의 최대선량(Dmax)은 각각 20.41±7.56Gy, 14.88±3.57Gy, 14.96±2.81Gy였다. LAD에서 흉벽(Chest wall)까지 평균거리는 각각 11.33±4.70mm, 22.40±6.01mm, 20.14±6.23mm였다. 결 론: DIBH와 CPAP에서 FB보다 폐 용적이 커짐으로써, 방사선치료영역인 흉벽과 심장의 거리가 멀어지는 효과 때문에 LAD의 선량을 감소시킬 수 있다. 좌측 유방암 방사선치료 시 DIBH방법의 대체방안으로 CPAP은 임상적 활용도가 높을 것으로 사료된다.

원통형 음향 홀로그라피를 이용한 성덕대왕 신종의 방사음장 특성 분석 (An analysis of the Sound Radiation Characteristics of the King Song-Dok Bell Using Cylindrical Acoustic Holography)

  • 김양한;김시문
    • 한국음향학회지
    • /
    • 제16권4호
    • /
    • pp.94-100
    • /
    • 1997
  • 성덕대왕 신종의 방사 음장 특성을 분석하기 위하여 30개의 마이크로폰으로 구성된 어레이를 이용하여 360개의 위치에서 음압을 측정한 후 원통형 음향 홀로그라피 방법을 적용하여 시간, 주파수별로 음장 해석을 행하였다. 타종 직후, 신종에서 방사되는 음장은 넓은 주파수 영역(800Hz까지 해석)에 걸쳐 고른 분포를 가지나 시간이 지남에 따라 고주파 성분은 급격히 감쇠하여 약 10초 이후에는 저주파 성분만이 존재한다. 마찬가지로 시간에 따른 음압 신호를 살펴보면 초기에 여러 성분의 모우드들이 중첩되어 복잡한 모양을 하고 있으나 10초 이후에는 한쌍의 저주파 성분(64.06Hz, 64.38Hz)에 의한 맥놀이 현상이 나타남을 확인할 수 있다. 이 맥놀이에 의한 여음이 초기의 화려하면서 장엄한 소리와 어우러져 신종만의 독특한 소리를 나타낸다. 맥놀이 현상은 종의 축에 대한 비대칭 현상에 의해 근접한 고유진동수를 가지기 때문에 발생하며 다른 고주파 성분에서도 쌍으로 존재하는 고유진동수를 관찰할 수 있다. 저주파 모우드의 경우 쌍으로 존재하는 방사 음장 형태는 길이 방향 절선 간격의 반에 해당되는 각도만큼 회전되어 나타난 것을 제외하고는 동일함을 알 수 있으며 고주파 모우드의 경우는 이보다 복잡한 모양을 이루고 있다.

  • PDF

Anatase TiO$_2$박막의 미세조직이 광촉매 효과에 미치는 영향 (Photocatalytic Efficiency of Anatase TiO$_2$Thin Film by Reactive Sputtering)

  • 최용락;김선화
    • 한국재료학회지
    • /
    • 제11권7호
    • /
    • pp.537-544
    • /
    • 2001
  • $TiO_2$광촉매릉 반응성 스퍼터링법을 이웅하여 박막으로 제조하고 유기물 및 살균실험을 통하여 미세조직이 광촉매 효율에 미치는 영향을 조사하고자 하였다. 광촉매 효율측정을 위하여 페놀분해실험 및 E.coli 078을 이용한 살균실험을 행하였다. $TiO_2$박막에 의한 페놀분해실험 시, 전자수용체인 산소의 공급에 의하여 분해효율이 2배까지 증가하였다. E.coli 078분해실험의 경우, 광촉매 $TiO_2$박막을 사웅하여 살균하였을때 UV만 조사하여 살균하였을 경우 보다 분해효율이 최고 70% 이상 증가하였다. 페놀분해실험과 E.coli 078 살균실험 결과 저결정성 박막의 경우 분해능이 매우 미약하였으며, 표면조도가 높고 결정성이 우수한 박막의 경우에 높은 광촉매 효율을 나타내어$TiO_2$박막의 광촉매 효과는 표면형상과 결정성이 매우 중요한 인자로 작용하였다.

  • PDF

강구의 충돌에 의한 양단자유 보의 진동 및 음향 방사에 관한 연구 (A Study on the Vibration and Acoustic Radiation from an Elastic Free- Free Beam due to a Steel Ball Impact)

  • 박홍철;이효근;박윤식
    • 대한기계학회논문집
    • /
    • 제16권9호
    • /
    • pp.1615-1626
    • /
    • 1992
  • 본 연구에서는 배플이 없는 사각단면을 가진 양단자유의 탄성보에 강구가 횡 방향으로 충돌할 때 발생되는 음압을 M.Sakata와 M.Horii의 방법을 적용하여 구하였으 며, 보의 가속도는 모우드 해석기법을 적용하여 구하였다. 그리고 충돌시 발생되는 충격격과 접촉시간은 허즈(Hertz)접촉이론을 이용하였다.그리고 실험을 통하여 이 론으로 구한보의 가속도, 접촉시간, 방사음압의 결과와 비교하였다. 기존의 연구내 용을 기반으로한 본 논문의 기여부분은 hertz 접촉이론을 본 연구의 시스템에 적용하 여 접촉시간을 실험적으로 검증하였으며 모우드 해석기법을 이용하여 구한 보의 진동 을 실험과 비교하였고, 시스템을 탄성보로하여 M.Sakata의 방법을 적용하여 발생되는 음압을 실험으로 검증한 것이다.

직장인의 만성질환 위험 요소별로 구성된 영양 교육의 효과 비교 연구 (Effects of Workplace Nutrition Education Program Tailored for the Individual Chronic Disease Risks)

  • 박한득;김은진;황명옥;백윤미;최태인;박유경
    • Journal of Nutrition and Health
    • /
    • 제43권3호
    • /
    • pp.246-259
    • /
    • 2010
  • The incidence of chronic disease is continuously increasing in Korea. Especially, office workers have higher risk of chronic disease because of their dietary habit and lifestyle. The study aimed to investigate the effect of tailored nutrition counseling on improving chronic disease risk factors. Ninety-nine male workers (age $46.9{\pm}7.0$ yrs) volunteered for 12 weeks of nutrition program containing dietary intake and physical activity adjustment. Five individualized programs were performed with the main theme of weight loss (WL, n = 16), blood pressure lowering (BL, n = 34), normalizing blood glucose (GL, n = 21), lipid lowering (LL, n = 13) and reducing MS risk factors (ML, n = 15). Anthropometric data, blood-pressure, self-reported questionnaire, blood profiles were measured before and after 12weeks of nutrition education. The education program included 5 times of 1:1 interview. Compared to 0 week, anthropometric data (weight, BMI, fat, visceral fat, waist, SBP, DBP) were significantly decreased after 12 weeks (p < 0.001). Fasting blood glucose and total cholesterol were decreased (p < 0.05). The primary outcomes with individually tailored programs showed to be more effective than one general nutrition program.

압력용기강재 SA508 class 3 용착금속의 조사거동 (Irradiation Behavior of Reactor Pressure Vessel SA508 class 3 Steel Weld Metals)

  • 고진현;박형근;김수성;황용화;서윤석
    • Journal of Welding and Joining
    • /
    • 제28권5호
    • /
    • pp.69-74
    • /
    • 2010
  • Irradiation behavior of the reactor pressure vessel SA508 class 3 steel weld metals was examined by Charpy V Notch impact specimens. The specimens were exposed to a fluence of $2.8{\times}1019$ neutrons(n)/$cm^2$(E>1 MeV) at $288^{\circ}C$. The irradiation damage of weld metal was evaluated by comparison between unirradiated and irradiated specimens in terms of absorbed energy and lateral expansion. The specimens for neutron irradiation were welded by submerged arc welding process at a heat input of 3.2 kJ/mm which showed good toughness in terms of weld microstructure, absorbed energy and lateral expansion. The post-irradiation Charpy V notch 41J and 68J transition temperature elevation were $65^{\circ}C$ and $70^{\circ}C$, respectively. This elevation was accompanied by a 20% reduction in Charpy V notch upper shelf energy level. The lateral expansion at 0.9mm irradiated Charpy specimens showed temperature elevation of $65^{\circ}C$ and was greatly decreased due to radiation damage.