• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.269-273
• /
• 2013

This paper analyzed a potential interference of electric equipments on radio service below 30MHz through an experiment with a PDP(Plasma Display Panel) TV and a RF(Radio Frequency) light bulb in an anechoic chamber. The radiation levels of the PDP TV and the RF light bulb are measured and a combined interference is calculated on the basis of the experimental value. As a result, the combined interference signal level is increased according to the number of interferer. The possibility of a potential interference from electric equipments on radio service below 30MHz is realized through comparison between the measured radiation value of electric equipments and the CISPR(International Special Committee on Radio Interference) 11 limit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1242-1250
• /
• 2008

In this paper, we predicted the radiation field strength from the low power radio devices to force the radio interference on the AMPS receiver. The predicted value of 79.13[$dB{\mu}V/m$] is the upper value of radiation against the intermodulation interference emanated from the low power radio devices. To show the validity of the suggested values theoretical analysis on intermodulation and modeling of the AMPS receiver are performed, and also measurements on the AMPS receiver IC are carried out. The resultant numerals show the good match between them within the allowable tolerances.

• Journal of information and communication convergence engineering
• /
• v.10 no.3
• /
• pp.225-230
• /
• 2012

The Korean nationwide differential global positioning system (NDGPS) reference station transmits a global positioning system (GPS) enhancement signal using minimum shift keying modulation with a 200 bps data rate. The ocean-based DGPS covers the service area of 100 NM with 300 W output power; on the other hand, the land-based DGPS transmits the output power of 500 W, which covers the service area of 100 km. The DGPS reference stations with high output power can radiate spurious signals, which may act as interference sources affecting the other DGPS reference stations or the wireless ground stations that utilize the medium frequency band. In this paper, the radiation spectrums of the DGPS reference stations are measured and analyzed in the spurious domain. The DGPS radiation spectrums are evaluated from the perspective of the interference effect.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.467-474
• /
• 2004

In a High Altitude Platform (HAP) cellular communications network, each cell may be served by a dedicated spot-beam antenna. The antennas' beam properties and their spatial overlap control the co-channel interference. In prior literature, radiation patterns have been approximated by a main lobe followed by a constant sidelobe floor. A network of 121 cells has been studied and the method is here extended to the use of more realistic radiation patterns based on the theoretical aperture antenna patterns. This allows for the comparison of the effect of different aperture field tapers, which lead to reduced sidelobe levels and hence higher system capacity but also a more massive antenna payload.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.246-252
• /
• 2013

This paper presents method to suppress signal interference by using the filter in the RF output stage of the radiation equipment as a way to avoid interference between the RF(Radio Frequency) equipment mounted on aircraft. Especially filter design to suppress harmonics of the radiation equipment and testing method to verify the filter's performance is presented. Filter was installed at RF output stage of U/VHF radio in order to prevent interference between U/VHF(Ultra/Very High Frequency) radio and data link system. Filter design and testing method in this paper will be able to give help in the design of aircraft equipments as a tool that can be used to establish measures for problem of interference in the aircraft.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.51-54
• /
• 2008

The defected ground structure (DGS) for microstrip structure can be used to protect analog/RF signal from SSN interference of digital circuits on PCB with common ground. However, the basic DGS gives rise to undesired emissions that may interfere with nearby circuitry due to the ground discontinuity. In this paper, we have proposed the modified structure, Corrugated DGS and the method to reduce the radiation by adding the lumped resistor on the proposed Corrugated DGS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.553-556
• /
• 2012

The interference among the rain radars and interference in the adjacent wireless station due to the spurious signals from the rain radar were analyzed in this paper. The rain radar measures the rain intensity using S-band signal. The measured data are utilized in forecasting the rainfall. The interference among the rain radars or in the adjacent wireless stations may be caused by the high output power of rain radar. Based on the propagation analysis of S band signal and the deduced interference protection ratio of rain radar, the interference due to the rain radar are analyzed. Also, the radiation spectrum characteristics of a rain radar are deduced from the caused interference effects by the spurious signals of the rain radar.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.141-145
• /
• 2005

In this paper, UWB system did research about effect that interference effect with neighborhood single equipment or nearby group equipment gets In DMB service. 2.6425GHz satellite digital multimedia broadcasting service(SDMB) that electric wave interference special quality is contiguity frequency-band including interference of signal by unnecessary radiation level that is radiated in UWB system, and 3.4125GHz broadcasting relay net that is In-band frequency-band and interference effect degree that get in service did comparative analysis. SDMB system was BER $1{\times}10^{-4}$ that interference effect happens from 6.5m point and broadcasting signal reception is possible at 4m point. Also, it was BER $1{\times}10^{-4}$ that interference effect begins to happen from 5.0m point about center frequency 3.4126GHz and broadcasting signal reception is possible at 2m point. And, confirmed that UWB system of impulse method is less interference effect about 2 dB than UWB system of OFDM method, to electric wave of UWB system that is small output

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.6
• /
• pp.32-40
• /
• 2015

In this paper, the optimum antenna placement is analyzed by considering the interference between airborne antennas mounted on the unmanned aerial vehicle(UAV). The analysis is implemented by selecting the antennas that the distance and operational frequency band between airborne antennas is close to each other among the omni-directional antennas. The analyzed antennas are the control datalink, TCAS(Traffic Collision & Avoidance System), IFF(Identification Friend or Foe), GPS(Global Positioning System), and RALT(Radar ALTimeter) antennas. There are three steps for the optimum antenna placement analysis. The first step is selecting the antenna position having the optimum properties by monitoring the variation of radiation pattern and return loss by the fuselage of UAV after selecting the initial antenna position considering the antenna use, type, and radiation pattern. The second one is analyzing the interference strength between airborne antennas considering the coupling between airborne antennas, spurious of transmitting antenna, and minimum receiving level of receiving antenna. In case of generating the interference, the antenna position without interference is selected by analyzing the minimum separation distance without interference. The last one is confirming the measure to reject the frequency interference by the frequency separation analysis between airborne antennas in case that the intereference is not rejected by the additional distance separation between airborne antennas. This analysis procedure can be efficiently used to select the optimum antenna placement without interference by predicting the interference between airborne antennas in the development stage.

• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.239-246
• /
• 2005

This paper analyze the hazard of electromagnetic radiation to personnel (HERP) and electromagnetic interference (EMI) by C-band tracking radar. Especially, this analysis defines the safety distance for the controlled & uncontrolled personnel from high power radiation of electromagnetic wave within the main beam of 3 degrees by C-band tracking radar. In addition to HERP, the analysis of electromagnetic interference between tracking radar and weather radar was accomplished to decide the safety distance for EMI protection.