• The Journal of Korean Society for Radiation Therapy
• /
• v.4 no.1
• /
• pp.83-86
• /
• 1990

• Radiation Oncology Journal
• /
• v.4 no.2
• /
• pp.179-181
• /
• 1986

Computed tomography (CT) adds a new dimension in the study of body contour, organs, and tissues as well as various pathologic conditions. This modality provides a great degree of accuracy in radiation therapy Planning (RTP). However, CT images are usually taken on a small reduced format so that possible errors can be made during inputting the CT data into an automatic planner. Authors have designed a simple inexpensive magnifying device of CT images to obviate errors created by reduced image.

• Journal of Radiation Protection and Research
• /
• v.44 no.3
• /
• pp.97-102
• /
• 2019

Background: Dose rate meters are the most widely used, and perhaps one of the most important tools for the measurement of ionising radiation. They are often the first, or only, device available to a user for an instant check of radiation dose at a certain location. Throughout the world, radiation safety practices rely strongly on the output of these dose rate meters. But how well do we know the quality of their output? Materials and Methods: This review is based on the measurements 1,158 commercially available dose rate meters of 116 different makes and models. Expected versus the displayed dose patterns and consistency was checked at various dose rates between $5{\mu}Gy{\cdot}h^{-1}$ and $2mGy{\cdot}h^{-1}$. Samples of these meters were then selected for further investigation and were exposed to radiation sources covering photon energies from 50 keV to 1.5 MeV. The effect of detector orientation on its reading was also investigated. Rather than focusing on the angular response distribution that is often reported by the manufacturer of the device, this study focussed on the design ergonomics i.e. the angles that the operator will realistically use to measure a dose rate. Results and Discussion: This review shows the scope and boundaries of the ionising radiation dose rate estimations that are made using commonly available meters. Observations showed both inter and intra make and model variations, occasional cases of instrument failure, instrument walk away, and erroneous response. Conclusion: The results indicate the significance of selecting and maintaining suitable monitors for specific applications in radiation safety.

• The Journal of Korean Society for Radiation Therapy
• /
• v.23 no.2
• /
• pp.83-90
• /
• 2011

Purpose: This study statistically analyzed the difference of the stability of maintaining a respiratory period shown according to position and use of a device to search the tendency and usefulness of a device. Materials and Methods: The study obtained respiratory signals which maintained a respiratory period for 20 minutes each supine and prone position for 11 subjects. The study obtained respiratory signals in a state of using a belly board for 7 patients in a bad condition of a respiratory period in a prone position to analyze a change in respiration and the stability before and after the use of a device. Results: The supine part showed 54.5%, better than the prone part of 36.4% in a case that the stability for maintaining a respiratory period was in a good condition as a fixed respiratory period was well maintained according to the position. 6 patients (85%) showed a maintenance pattern of a respiratory period significantly different before the use and 4 patients showed a significantly good change in the stability for maintaining a respiratory period as a result that belly boards were used for 7 patients that the maintenance of a respiratory period was not in a good condition on a prone position. Conclusion: It seemed that this study could contribute to the maintenance of respiratory period and of respiratory stability as the optimal position for maintenance of respiration and the use of a device such as a belly board were decided through statistic analysis of respiratory signals and its application even if patient position and use of device were decided by the beam arrangement a treatment part of a patient, location of a target, and an expected plan.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.446-449
• /
• 2002

The video based electronic portal imaging device (EPID), which could display the portal image in near real time, was implemented to verify treatment position error in FSRT(Fractionated Stereotatic Radiation Therapy) instead of a portal film. Also, Developed FSRT system was composed of the stereotactic frame, frame mounting system and collimator cones. The verification of treatment position is very crucial in special therapies like FSRT. In general, the FSRT uses high dpse rate at small field size for treating small intracranial lesions. To evaluate quantitative positioning errors in FSRT, we used the first FSRT image as reference image and obtained the second FSRT image that was moved 2mm intentionally and detected intracranial contours after image processing. The generated 2mm error could be verified by overlapping only contours of two images. Through this study, the radiation treatment efficiency could be improved by performing precise radiation therapy with a developed video based EPID and FSRT.

• Radiation Oncology Journal
• /
• v.26 no.3
• /
• pp.189-194
• /
• 2008

Purpose: We designed a water-based bolus device for radiation therapy in Kaposi's sarcoma. This study evaluated the usefulness of this new device and compared it with the currently used rice-based bolus. Materials and Methods: We fashioned a polystyrene box and cut a hole in order to insert patient's extremities while the patient was in the supine position. We used a vacuum-vinyl based polymer to reduce water leakage. Next, we eliminated air using a vacuum pump and a vacuum valve to reduce the air gap between the water and extremities in the vacuum-vinyl box. We performed CT scans to evaluate the density difference of the fabricated water-based bolus device when the device in which the rice-based bolus was placed directly, the rice-based bolus with polymer-vinyl packed rice, and the water were all put in. We analyzed the density change with the air gap volume using a planning system. In addition, we measured the homogeneity and dose in the low-extremities phantom, attached to six TLD, and wrapped film exposed in parallel-opposite fields with the LINAC under the same conditions as the set-up of the CT-simulator. Results: The density value of the rice-based bolus with the rice put in directly was 14% lower than that of the water-based bolus. Moreover, the value of the other experiments in the rice-based bolus with the polymer-vinyl packed rice showed an 18% reduction in density. The analysis of the EDR2 film revealed that the water-based bolus shows a more homogeneous dose plan, which was superior by $4{\sim}4.4%$ to the rice-base bolus. The mean TLD readings of the rice-based bolus, with the rice put directly into the polystyrene box had a 3.4% higher density value. Moreover, the density value in the case of the rice-based bolus with polymer-vinyl packed rice had a 4.3% higher reading compared to the water-based bolus. Conclusion: Our custom-made water-based bolus device increases the accuracy of the set-up by confirming the treatment field. It also improves the accuracy of the therapy owing to the reduction of the air gap using a vacuum pump and a vacuum valve. This set-up represents a promising alternative device for delivering a homogenous dose to the target volume.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.1024-1030
• /
• 2015

Safety and security system have been internationally enhanced in a field of shipping logistics. Accordingly, techniques for safety and security have been studied steadily. The need of portable radiation detection device is increasing by the search of the container is enhanced. In this paper, we propose a study to improve the life of the system and the realization of portable radiation detection device based on Cortex-A9. Configuration of a portable radiation detection device is configured largely to an analog board and the digital platform and the sensor module. The power used in each stage of the analog board is varied. Uses a switching regulator to use various power supply thereby to generate an error result and cause the switching noise. It is proposed to reduce the power consumption reducing technique for the study.

• Progress in Medical Physics
• /
• v.33 no.4
• /
• pp.136-141
• /
• 2022

Purpose: This study aimed to develop a breath control training system for breath-hold technique and respiratory-gated radiation therapy wherein the patients can learn breath-hold techniques in their convenient environment. Methods: The breath control training system comprises a sensor device and software. The sensor device uses a loadcell sensor and an adjustable strap around the chest to acquire respiratory signals. The device connects via Bluetooth to a computer where the software is installed. The software visualizes the respiratory signal in near real-time with a graph. The developed system can signal patients through visual (software), auditory (buzzer), and tactile (vibrator) stimulation when breath-holding starts. A motion phantom was used to test the basic functions of the developed breath control training system. The relative standard deviation of the maxima of the emulated free breathing data was calculated. Moreover, a relative standard deviation of a breath-holding region was calculated for the simulated breath-holding data. Results: The average force of the maxima was 487.71 N, and the relative standard deviation was 4.8%, while the average force of the breath hold region was 398.5 N, and the relative standard deviation was 1.8%. The data acquired through the sensor was consistent with the motion created by the motion phantom. Conclusions: We have developed a breath control training system comprising a sensor device and software that allow patients to learn breath-hold techniques in their convenient environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.418-426
• /
• 2021

This study investigates the perception of radiation safety management in radiation generator manufacturing workers and medical institutions. The basic data obtained is further applied to improve active coping ability and safety levels. The knowledge and attitude practice score of radiation was found to be related to gender, age, marital status, occupation, position, current work period, total work period, radiation related work period, the manual available, defense facility maintenance, number of defense equipment, radiation safety education, special health examination, and recognition of radiation terms. In particular, the knowledge score of radiologists was highest among the radiation-related occupations (<0.05). Radiation safety management requires active defense endeavors to prevent radiation exposure, by both workers of radiation manufacturers and medical institutions. Moreover, institutional devices such as compliance with guidelines, periodic education, facility reinforcement, manual preparation, and special health checkups are required for efficient radiation safety management.

• The Journal of Korean Society for Radiation Therapy
• /
• v.13 no.1
• /
• pp.47-50
• /
• 2001

Purpose : 체내에서 optimal한 dose distribution을 얻기 위해 도입된 IMRT를 시행할 때 사용하는 MLC는 기계특성상 장기적인 check와 교정을 요한다. 또한 MLC는 static하지 않고 dynamic하기 때문에 leaf position의 실제 위치가 매우 중요하다. MLC QA를 위해 QA 소요시간 및 노력이 많이 MLC position check 요구되는 불편이 있어, 삼성서울 병원에서 필름을 이용한 MLC position check device를 제작하여 간편하게 사용하고 그 우수성에 대해 결과를 보고하고자 한다. Materials and Method : MLC position을 check하기위해 사각형 의 device(acryl:$40{\times}40{\times}5cm$)를 제작하였다. position check device의 정확도를 위해 표면에 real scale 표시용으로 Pb marker를 2cm 간격으로 부착하였다. MLC QA film은 마주보는 (opposite) MLC leaf의 간격이 4mm로 set up한 상태에서 double exposure하여 marker를 이용하여 오차를 분석하였다. MLC position check device의 효율성을 평가하기위해 6MV photon으로 10번 반복 실험을 실시하여 MLC leaf의 평균오차를 조사하고 조사에 걸린 시간을 비교하여 유용성을 평가하였다. Results : 실험결과 MLC leaf의 평균오차를 조사하고 조사에 걸린 시간을 비교하여 유용성을 평가하였다. 범위는 1.45mm였고, 최소 오차는 0.34mm로 나타났다. 1회 조사에 걸린 시간은 평균적으로 약 30분 정도 소요되었다. MLC position check device의 효율성을 평가한 결과오차의 반복성은 관찰되지 않았다. Conclusion : MLC leaf position의 정기적인 check와 교정을 위해 본원에서는 주1회 정기 position error를 check하고 있으며, 평균 월1회 교정을 한다. 본 실험을 통해 MLC position check device를 사용하여 leaf 오차가 2mm이하의 만족할 만한 결과를 얻었다. 또한 MLC position check device를 사용하면 짧은 시간에 모든 leaf의 position error를 쉽게 측정할 수 있고 한 장의 필름으로 모든 결과를 평가할 수 있어 경제성 및 업무의 효율성도 높일 수 있었다.