• The Korean Journal of Physiology
• /
• 제2권2호
• /
• pp.63-73
• /
• 1968

It is well known that mammalian alveolar membrane is covered with a very thin layer of surfactant film which characteristically reduces surface tension of alveolar membrane, and maintains alveolar stability. Since Clements in 1957 demonstrated that the surfactant is extractable by mincing the lung tissue in saline, various studies on the subject have been succeeded by many workers. However, the effect of radiation on the surfactant is not well clarified. Present study was attempted to observe the effect of x-irradiation on the activity of surfactant in rabbits. X-ray in dose of 300 r, 600 r or 900 r was irradiated to the chest of rabbits. The lung was removed from normal or irradiated rabbits sacrificed by arterial blood shedding, and lung-saline extract, adding 3 grams of lung tissue to 50 mili-liters of saline, was prepared by means of Vertis homogenizer. Tension-area diagram of lung extract was recorded automatically by a modified Langmuir-Wilhelmy balance with a synchronized recording system designed in this department. The surface tension of lung extract was measured at 1st, 2 nd, 3 rd, 7 th and 15 th post-radiation day in 300 r irradiated group, at 3 rd, 7 th and 15 th post-radiation day in 600 r irradiated group, 3 rd and 7 th post-radiation day in 900 r irradiated group respectively. For the histo-pathological study, lung tissue preparations were made in all irradiatiated groups on the day of experiment and in normal group. The results obtained are summarized as follows: 1. The minimal surface tension, maximal surface tension and stability index of normal rabbits lung extracts were 7.68 dynes/cm, 38.84 dynes/cm, and 1.39 respectively. 2. The activity of surfactant was depressed prominently by x-irradiation. However, increase in the dose of x-irradiation did not show any significant change in the degree of surfactant activity suppression. The most marked depression in surfactant was observed at the third post-radiation day in all irradiated groups. 3. Activity of surfactant depressed by x-irradiation showed a tendency of recovering to normal on 15 th post-radiation day. 4. The tendency of change in activity of surfactant following x-irradiation was somewhat correlative with histo-pathological changes. But the degree of depression of surfactant by x-irradiation did not correspond to the degree of histo-pathological changes, and recovery of lung tissue from radiation damage, tissue edema and congestion, seemed to be followed by restoration of surfactant activity. 5. The width of the tension-area diagram was measured at the surface area of 40% in lung extract of normal and x-irradiated rabbits. And it was found that the changes of the width corresponded well with that of minimum surface tension and of stability index in all normal and x-irradiated groups.

• 대한토목학회논문집
• /
• 제30권3B호
• /
• pp.233-242
• /
• 2010

Bastiaanssen(1995)에 의해 개발된 SEBAL(Surface Energy Balance Algorithm for Land) 모형은 25개의 sub model들을 이용하여 지표의 증발산량과 기타 여러 에너지 교환을 계산하는 이미지-프로세싱 모형이다. SEBAL 모형은 Landsat 또는 기타 여러 위성영상을 통해 얻을 수 있는 열적외선 방사, 표시 및 근적외선 측정 자료 등을 사용한다. 본 연구에서는 한강유역의 주 지류인 경안천 유역에 모형을 적용시켰다. 증발산량(ET)은 4개년의(2001년-2004년) Landsat과 MODIS 위성영상을 입력자료로 사용하여, 에너지 균형원리를 통해 pixel-by-pixel을 기준으로 계산되었다. Landsat(30 m)과 MODIS(1 km) 사이의 비교 결과도 평가되었으며, Landsat과 MODIS 결과들은 FAO Penman-Monteith 증발산량과 비교하였다. 위성영상 ET들과 FAO Penman-Monteith ET 간의 절대 오차는 12% 이내로 확인되었으며, 유역 분포 증발산량의 시공간분포특성 또한 분석하였다.

• 한국지리정보학회지
• /
• 제11권3호
• /
• pp.151-165
• /
• 2008

지형경사와 사면방향은 BROOK90 Model과 같은 물리 결정 물수지 모델에서 증발산과 융설, 순복사 등을 계산하기 위해서 사용하는 중요한 매개변수가 된다. 본 연구에서는 수치표고모형(DEM)을 제작하고, DEM의 해상도가 달라짐에 따라서 유역 평균 지형경사와 유역 평균 사면방향이 어떻게 달라지는지, 그리고 이 차이는 물리 결정 일괄 매개변수 물수지 모델인 BROOK90의 물수지 모의 결과에 어떤 영향을 미치는지를 평가하였다. 충청도 병천천 유역을 대상으로, DEM은 1:25,000 수치지형도를 이용하여 TIN과 Topo To Raster 방법으로 제작하였다. 각각의 방법으로 10m~100m 해상도의 DEM을 10m 간격으로 10개씩 총 20개의 DEM을 제작하였다. DEM의 해상도가 높아지면 병천천 유역의 평균 지형경사가 커져서 이는 병천천 유역의 증산량을 증가시키고 하천유출량을 감소시켰다. 이것은 평지보다 경사지가 직달복사량을 많이 받는 물리적 특성이 모델에 반영되어 있기 때문이다. 한편, DEM의 해상도가 낮아지면 병천천 유역에서는 평균 사면방향이 남동방향에서 남향으로 이동하는 경향이 있었다. 이에 따라 증발산량이 증가하고 하천유출량은 감소하는 것으로 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2606-2611
• /
• 2003

Comprehensive study on the control system design for a RTP process has been conducted. The purpose of the control system is to maintain maximum temperature uniformity across the silicon wafer achieving precise tracking for various reference trajectories. The study has been carried out in two stages: thermal balance modeling on the basis of a semi-empirical radiation model, and optimal iterative learning controller design on the basis of a linear state space model. First, we found through steady state radiation modeling that the fourth power of wafer temperatures, lamp powers, and the fourth power of chamber wall temperature are related by an emissivity-independent linear equation. Next, for control of the MIMO system, a state space modeland LQG-based two-stage batch control technique was derived and employed to reduce the heavy computational demand in the original two-stage batch control technique. By accommodating the first result, a linear state space model for the controller design was identified between the lamp powers and the fourth power of wafer temperatures as inputs and outputs, respectively. The control system was applied to an experimental RTP equipment. As a consequence, great uniformity improvement could be attained over the entire time horizon compared to the original multi-loop PID control. In addition, controller implementation was standardized and facilitated by completely eliminating the tedious and lengthy control tuning trial.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.19-22
• /
• 2002

The importance of accurate dose delivery in radiotherapy is well documented. Studies have shown that a mere 5% deviation of the prescribed dose can produce an undesirable treatment outcome. Uncertainties in the dose delivery can arise at different stages of the radiotherapy process. Therefore, a good quality assurance programme will ensure the best possible results and consistency of the radiotherapeutic treatment. Quality assurance in any radiotherapy department involves the responsibility of a multi-disciplinary team of radiation oncologists, medical physicists and radiation technologists. This paper will focus on the physical and technical aspects of QA. The organizational structure and responsibility of the physics QA team is outlined and also included the types and frequencies of QA checks. For a QA program to be effective, action levels should be clearly defined and understood by all staff concerned. Data of the Singapore National Cancer Centre's participation over the last ten years with the IAEA / WHO Postal TLD Dose Inter-comparison programme is presented. The data obtained were within the international criteria. For a QA program to be successfully implemented, there must be a commitment by management to provide adequate staff, test equipment, machine time as well as continual training and education. This is in addition to the positive attitudes of all the staff. A quality audit is also necessary to serve as a check and balance to ensure that the QA is in order.

• 대한기계학회논문집B
• /
• 제27권6호
• /
• pp.796-803
• /
• 2003

The discrete ordinates interpolation method (DOIM) has shown good accuracy and versatile applicability for the radiation $problems^{(1,2)}$. The DOIM is a nonconservative method in that the intensity and temperature are computed only at grid points without considering control volumes. However, when the DOIM is used together with a finite volume algorithm such as $SIMPLER^{(3)}$, intensities at the control surfaces need to be calculated. For this reason, a 'quadratic' and a 'decoration' schemes are proposed and examined. They are applied to two kinds of radiation problem in one-dimensional geometries. In one problem, the intensity and temperature are calculated while the radiative heat source is given, and in the other, the intensity and the radiative heat source are computed with a given temperature field. The quadratic and the decoration schemes show very successful results. The quadratic scheme gives especially accurate results so that further decoration may not be needed. It is recommended that the quadratic and the decoration schemes may be used together, or, one of them may be applied for control volume radiative energy balance.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.19-25
• /
• 2006

Energy efficient and low pollution combustion systems the use gaseous fuels have been in great demand in recent year. Radiant burner in many different forms are emerging as very desirable combustion systems for same reason. Porous radiant burners are used in drying, preheating and curing, and in other type of materials processing and manufacturing processes. However, little knowledge is available about the operating characteristics and the structure of flames in porous ceramic fiber radiant burners. The objective of the present work is to investigate the global performance characteristics of the ceramic fiber burner. A detailed study which includes the spectral intensity, gas temperature, radiation efficiency and global pollutant emissions. Another objective is to study the flame structure of the ceramic fiber burner by measuring the local gas temperature. The results indicate that ceramic fiber burner do offer a 19-44% gain in radiant efficiency. The ceramic fiber burner exhibit significant spectral intensity peaks in the band at $2.0-2.5{\mu}m$. The local temperature distribution inside the mat and near the mat surface as a function of the equivalence ratio can be reasonably interpreted by the relation of the heat balance in the mat and movement of the reaction zone. Nox emission from ceramic fiber burner is less than 25ppm throughout the operating range.

• 한국태양에너지학회 논문집
• /
• 제21권1호
• /
• pp.33-42
• /
• 2001

The paper discusses the modelling of the thermal storage roof with the air circulation system. In this system, the fully glazed absorber plate is put on the top of the conventional pitch roof made of massive concrete and acts as a solar air heater. Solar radiation collected into absorber is stored in the roof structure by radiation and convection so that it reduces the nighttime heating load through the roof. Another part of the energy is also transmitted to internal air drawn into the channel and is then introduced Into the room. To analysis the system, the energy balance equations are developed and are solved using a finite difference method. The calculation results show a good agreement with the measured ones obtained from our experiments. From the results, it is seen that the thermal storage roof with the air circulation system reduces significantly the conductive heat loss compared with that for the conventional roof and has the instantaneous solar collection efficiency of about 30%.

• 생물환경조절학회지
• /
• 제6권3호
• /
• pp.205-215
• /
• 1997

본 연구에서는 온실 재배 토마토 군락의 열수지에 근거한 증산모델을 구성하고 실험을 통하여 모텔에 필요한 계수의 추정과 모질의 검증을 수행하였다. 온실의 일사략과 엽-대기수증기압차(LVPD)를 매개변수로 하는 기공확산저항 추정식을 구성하여 기공작산저항 실측 자료를 이용하여 추정식의 계수를 추정하였다. 이 추정식으로 기공확산저항 변이의 80％ 이상을 설명할 수 있었으며 추정식에 이용하지 않았던 독립 자료를 이용하여 검정한 결과 추정정도가 높아 증산예측 모델의 구성식으로 이용될 수 있는 것으로 판단되었다. 반투과성 매질의 복사 흡수이론을 적용한 Stanghellini의 식을 다소 변형하여 모델의 군락 순복사 추정식으로 사용하였으며 이 추정식에 의하여 계산된 순복사량은 실측치와 잘 일치하였다. 계수 추정에 사용하지 않았던 독립 자료를 이용하여 순복사 및 기공확산저항 추정식으로 구성된 증산예측 모델의 군락온도 및 증산예측 정도를 검증하였다. 모델에 의하여 계산된 군락 온도, 순간 증산속도 및 일 총 증산량은 실측치와 잘 일치하여 본 연구에서 작성된 증산 예측 모델은 온실 재배 토마토의 환경제어, 관개제어 등에 실용적으로 활용될 수 있을 것으로 판단되었다.

• 한국지리정보학회지
• /
• 제23권4호
• /
• pp.156-172
• /
• 2020

본 연구는 대상도로인 내부순환로에 대해 태양복사모델(SOlar and LongWave Environmental Irradiance Geometry-model, SOLWEIG)을 통해 산출한 도로의 그림자 패턴을 사용하여 항상 그늘이 지는 음영지역을 살펴보고, 열수지법을 기반으로 한 노면온도예측모델(road surface temperature prediction model, 이하 RSTPM)과 SOLWEIG 모델을 연계하여 고해상도의 태양복사정보를 활용한 도로의 노면온도를 예측하고자 하였다. 우선, 그림자 패턴 및 복사플럭스 산출의 정확도를 높이기 위하여 안개, 구름, 강수 등의 영향을 최소화할 수 있는 사례일을 선정하여, 고도 및 지형의 효과에 따른 그림자의 영향을 살펴보았다. 그 결과, 터널 입출구와 고도가 높은 지역에서 그림자 영역이 오래 지속되었고, 그림자의 영향을 많이 받는 구간의 복사량 감소가 뚜렷하게 나타났다. 이는 노면온도 예측결과에 반영되어 지형적으로 개방된 지점에서는 노면온도가 높게 예측되고, 고도가 높은 지점들은 그렇지 않은 지점에 비해 상대적으로 낮게 예측되었다. 본 연구의 결과는 겨울철 기상상황에 따른 도로 결빙구간을 예측하여 도로 관리자 및 운전자의 의사결정 자료로서의 활용이 기대된다.