• 보건교육건강증진학회지
• /
• 제19권2호
• /
• pp.99-113
• /
• 2002

While the use of radiation in the medical field provides diagnosis and treatment with important benefits, we cannot deny that the radiation bombing causes some hindrances. The expansion of radiation use in modem medicine is essential, so the radiation use and preparation of proper measure for safety management has risen as a pressing subject. Therefore, in order to make defensive plans for the prevention of health obstacles to general users of radiation and for the provision of basic data of the health education programs to radiation workers by grasping the knowledge, attitude and behavior towards the radiation safety management of radiation workers in each medical institution and by analyzing the factors that affect the actions of radiation safety management, in this study we conducted questionnaires from September 26 to November 5, 2001 targeting 805 radiation workers in 108 medical institutions including university hospitals, general hospitals, hospitals, clinics and public health centers etc. located in Seoul, four metropolitan cities and small and medium cities, and has obtained the following results. 1. The average point of knowledge on the radiation safety management was 10.96 out of 15. As for the general characteristics, the level of knowledge on radiation safety management was higher with older age, high education background and longer career. 2. The average point of attitude on the radiation safety management was 66.36 out of 75. The attitude point for general characteristics were higher with higher education background, longer career and in case of universities, the level of attitude on the radiation safety management was high. 3. The average of action points on the radiation safety management was 56.09 out of 75. In general characteristics, the action level of radiation safety level was higher with older age, longer career, and the reception of radiation education and in case of university hospitals. 4. It is analyzed that the relation of knowledge, attitude and behavior on the radiation safety management is higher as the levels of knowledge and attitude on the radiation safety management is higher. 5. As a result of analyzing the factors that affect the knowledge on the radiation safety management, the variables that can be explained best was in the order of ‘the behavior on the radiation safety management’, ‘work career’, ‘the attitude on the radiation safety management’, and ‘school career’. 6. As a result of analyzing the factors that affect the attitude on the radiation safety management, the variables that can be explained best was in the order of ‘the behavior on the radiation safety management’, ‘the knowledge on the radiation safety management’, and ‘school career’. 7. As a result of analyzing the factors that affect the behavior on the radiation safety management, the variables that can be explained best was in the order of ‘the attitude on the radiation safety management’, ‘the knowledge on the radiation safety management’, and ‘the frequency of radiation education

• 대한기계학회논문집A
• /
• 제22권4호
• /
• pp.879-886
• /
• 1998

It is very important to understand the vibration and noise characteristics of a structure to developed quiet machines and lessen their noise. In this paper, the vibration and sound radiation characteristics of a simple and a bar-stiffened plate have been investigated using numerical and experimental techniques. In numerical process, FEM analysis has been performed for the vibration level ; the time-space squared and averaged velocity and BEM analysis for sound radiation parameters ; sound power and radiation efficiency. In experimental process, FFT signal processing method has been used. While a power from an exiciter is applied to the structure by using a point contact, sound intensity and vibration level has been measured. Based on these two data, the radiation efficiency has been calculated. Results show that the radiation efficiency for the stiffened structure increases compared to the simple plate, due to the extra edges provided by the stiffener.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.164-167
• /
• 2005

The noise level of refrigerating units is becoming more important to the manufacturer and the user of the product. Invariably, the compressor is a significant contributor to the overall noise level. Especially a major portion of the noise radiated by the vibration of the compressor shell. This paper presents an approach to relate the dynamic characteristics of the compressor shell with the noise radiation properties and the methods of redesigning the compressor shell to reduce the noise radiation. To relate the dynamic characteristics of the compressor shell with the noise radiation properties, the vibration and radiated sound were measured with the running compressor. Based on the results of these tests correlations between the shell vibration characteristics and the noise radiation properties are identified It was found that the vibration on the compressor shell and the noise radiated from the compressor were stronglycorrelatedincertainfrequencybands.

• 대한의용생체공학회:의공학회지
• /
• 제38권5호
• /
• pp.256-263
• /
• 2017

By using the buildup characteristics of the radiophotoluminescence glass dosimeter(RPLGD), it is aimed to help the measurement of the accurate dose by measuring the radiation dose according to the time of the glass element. Five glass elements were arranged on the table and the source to image receptor distance(SID) was set to 100 cm for the build-up radiation dose measurement of the fluorescent glass dosimeter glass element(GD-352M). Radiation doses and saturation rates were measured over time according to irradiation time, with the tube voltage (30, 60, 90 kVp) and tube current (50, 100 mAs) Repeatability test was repeated ten times to measure the coefficient of variation. The radiation dose increased from 0.182 mGy to 12.902 mGy and the saturation rate increased from 58.3% with increasing exposure condition and time. The coefficient of variation of the glass elements of the fluorescent glass dosimeter was ranged from 0.2 to 0.77 according to the X - ray exposure conditions. X - ray exposure showed that the radiation dose and saturation rate were increased with buildup characteristics, and degeneration of glass elements was not observed. The reproducibility of the variation coefficient of the radiation generator was included within the error range and the reproducibility of the radiation dose was excellent.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1156-1165
• /
• 2002

The characteristics of combustion and radiation heat transfer of an oxygen-enhanced diffusion flame was experimentally analyzed. An infrared radiation heat flux gauge was used to measure the thermal radiation of various types of flames with fuel, air and pure oxygen. And the Laser Induced Incandescence (LII) technique was applied to characterize the soot concentrations which mainly contribute to the continuum radiation from flame. The results show that an oxygen-enhanced inverse diffusion flame is very effective in increasing the thermal radiation compared to normal oxygen diffusion flame. This seems to be caused by overlapped heat release rate of double flame sheets formed in inverse flame and generation of higher intermediate soot in fuel rich zone of oxygen-fuel interface, which is desirable to increase continuum radiation. And the oxygen/methane reaction at slight fuel rich condition (ø=2) in oxygen-enhanced inverse flame was found to be more effective to generate the soot with moderate oxygen availability.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권3호
• /
• pp.115-121
• /
• 2003

This paper proposes a radiation model, which considers radiation transport as an important component in hot gas analysis. This radiation model is derived from combining the method of partial characteristics (MPC) with net emission coefficient (NEC), and it covers the drawbacks of existing models. Subsequently, using this proposed model, the arc-flow interaction in an arcing chamber can be efficiently computed. The arc is represented as an energy source term composed of ohmic heating and the radiation transport in the energy conservation equation. Ohmic heating term was computed by the electric field analysis within the conducting plasma region. Radiation transport was calculated by the proposed radiation model. Also, in this paper, radiation models were introduced and applied to the gas circuit breaker (GCB) model. Through simulation results, the efficiency of the proposed model was confirmed.

• 한국치위생학회지
• /
• 제16권2호
• /
• pp.215-224
• /
• 2016

Objectives: The purpose of the study was to investigate the related factors of performance of radiation safety management in dental hygienists. Methods: A self-reported questionnaire was completed by 183 dental hygienists using dental radiography in 110 dental clinics in G area by convenience sampling methods. The questionnaire consisted of general characteristics of the subjects, radiation-related characteristics, and performance and management of radiation safety. Results: Performance score of radiation safety management was $35.71{\pm}12.49$ in dental hygienists. The performance score of radiation safety management were associated with sex, numbers of dental hygienists, the average numbers of admitted patients per day, the total clinical experience, existence of manual for radiation safety management and perceived need for education of radiation safety management. Conclusions: The performance score was relatively low. The performance score was associated with radiation safety manual and safety equipment. The preparation of radiation protective environment and equipment will improve the performance of radiation safety management in dental hygienists.

• 대한전자공학회논문지TC
• /
• 제45권4호
• /
• pp.43-52
• /
• 2008

패치 안테나 주위에 mushroom 형태를 가지는 EBG 구조를 길이 방향, 폭 방향과 모든 방향으로 집적한 경우 구조 파라미터에 따른 패치 안테나의 방사 특성을 연구하였다. EBG 구조가 길이 방향을 따라 집적된 경우가 가장 방사 특성이 좋음을 볼 수 있었다. EBG 패치 edge에서 패치 안테나의 피드까지의 거리가 같은 경우가 패치 안테나의 중심까지의 거리가 같은 경우와 비교하여 E-평면 방사패턴이 대칭적이고 전방방사 크기가 커지고 후방방사 크기가 작아짐을 볼 수 있었다. 사용하는 EBG 구조의 주기 수가 4주기 이상이 되게 되면 방사특성 변화는 거의 발생하지 않음을 볼 수 있었다.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.93-99
• /
• 2013

This study was conducted to evaluate the effect of gamma irradiation on the microbiological and sensory characteristics of frozen Bibimbap. Frozen Bibimbap vegetables were contaminated by microbial levels of $2.70{\sim}6.67log\;CFU\;g^{-1}$ in total aerobic bacteria. Frozen Bibimbap was contaminated by microbial levels of $4.8log\;CFU\;g^{-1}$ in total aerobic bacteria, but microorganisms in gamma-irradiated samples at above 25 kGy were not found at detection limit less then $1log\;CFUg^{-1}$. Sensory characteristics of the gamma-irradiated Bibimbap were decreased depending upon the irradiation dose, and sensory scores of the samples irradiated with doses higher than 10 kGy were significantly decreased. Therefore, the application of combination of the various food processing technology should be considered for the sterilization of Bibimbap, without any deterioration of quality occurred by high dose irradiation.

• 한국태양에너지학회 논문집
• /
• 제22권4호
• /
• pp.35-43
• /
• 2002

This research makes that quantitative radiation property of an actual town ward is obtained in quest of the parameter with regard to a radiation heat transfer property and set up several town ward models that reproduced a solid form of a city along the attribute of the city. A regular trend possibility that is able to evaluate a radiation characteristics of a town ward quantitatively from a town ward guideline and confirmation that is produced about each parameter as a result of a numerical value simulation it obtained. This research shot a coefficient of Gebhart's emission absorption. sky radiation absorption rate direct solar radiation absorption rate the parameter with regard to a radiation heat transfer characteristics of a town ward in each town ward model and a volume rate of a town ward advances case study under regular such condition and shot the absorption rate, direct and others days and calculated an absorption rate and checked about the relation between a town ward and each radiation heat transfer property of a city.