• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.267-269
• /
• 2018

In this letter, the null steering of a circular array is presented using a modified array factor (AF) for a global positioning system (GPS) anti-jam. The seven radiating elements were designed using a mu-zero resonance (MZR) circularly polarized (CP) antenna arranged toward the center. Since the radiating elements, which are arranged toward the center, have a CP characteristic, the AF of the seven radiating elements has to be modified considering the rotation angle of the nth radiating element. The phases of input ports can be calculated to implement a nulling of radiation patterns where the modified AF is zero. To verify the modified AF for null steering in the desired direction, two cases of power dividers operating in $L_2$ band (1.2276 GHz) were fabricated to achieve pattern nulling at a certain angle. The modified AF can be confirmed by a comparing the simulated and measured radiation patterns.

• 전기전자학회논문지
• /
• 제24권3호
• /
• pp.917-920
• /
• 2020

본 논문에서는 Ku대역 통신시스템을 사용하는 큐브 위성에 장착이 가능한 평면배열안테나 있어, isoflux 방사특성을 유도하기위한 급전신호 가중치 분석에 관하여 연구하였다. 평면배열안테나는 큐브위성 장착성을 고려하여 8*8개의 방사소자를 평면 배열하였으며, 각 축 기준 방사소자 간 간격은 0.5 lambda로 설정하였다. isoflux 방사특성 유도를 위한 급전신호 가중치는 저대역 통과필터 설계에 활용되는 신호처리 기법을 이용하여 산출하는 방법을 제시하였다. 본 논문에서 제안된 방법의 분석 결과 원활한 isoflux 패턴을 유도할 수 있음을 확인하였다.

• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.11-22
• /
• 2023

평면 능동위상배열안테나 시스템에 있어, 간소화된 방사특성 측정 절차를 가지는 방사소자 결함진단 기법을 제시하였다. 이를 위해 평면 배열 구성에 대한 방사특성을 기반으로 선형 배열 구성으로 근사화 분석할 수 있는 방법 및 방사소자 결함진단과정에서 발생할 수 있는 유일해 문제를 해소하기 위한 방법을 연구하였다. 본 논문에서 제시된 기법 및 유전 알고리즘을 기반으로 다양한 평면 능동위상배열안테나 구성에 따른 방사소자 결함진단에 대한 모의실험을 수행하였다. 모의실험 결과, 제시된 방사소자 결함진단 기법은 다양한 구성을 가지는 평면 능동위상안테나에 대해서도 적용가능함을 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.997-1001
• /
• 2014

In this paper, the interference in small MIMO antennas having two identical composite right- and left-handed transmission-line(CRLH-TL)-based radiating elements is remarkably decreased. The radiating element has the broadside-capacitive coupling as well as slots to be equivalent to the CRLH-TL to prevent the size from increasing for an LTE high band. The suspended line bridging the two radiating elements is optimized to lower the interference between them down to -23 dB, while the overall MIMO antenna system is compact and its antenna performance is acceptable. The design is tested for 2.5 GHz.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.303-308
• /
• 2010

This paper proposes a method for improving the isolation characteristic of multi-input multi-output (MIMO) antennas using a split ring resonator (SRR) array structure between the two radiating elements. The fabricated antenna satisfies the 10 dB return loss requirement in the Mobile-WiMAX frequency band from 3.4 GHz to 3.6 GHz. The isolation between the two radiating elements is improved by approximately 20 dB at the center frequency by inserting a SRR array structure. The measured peak gains of the two elements are 2.3 dBi and 2.4 dBi, respectively.

• 전기전자학회논문지
• /
• 제25권2호
• /
• pp.408-411
• /
• 2021

This paper presents a new reflectarray antenna capable with 1-bit switchable capability for W-band beamforming network. The proposed antenna has been optimized using two unit-cells with sizes of 1.0 mm and 1.3 mm to form a total number of 193 radiating elements on a square aperture surface of length 30 mm. These radiating elements are spaced 0.5 wavelengths apart and fed by a 15 dBi pyramidal horn antenna as the feed antenna placed 53 mm away from the aperture center. The proposed reflectarray achieves a realized peak gain of 22.52 dBi, a half-power beamwidth of 5.1° in both E- and H-planes at the test frequency of 80 GHz and operates over a wide bandwidth from 74 GHz to 90 GHz.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.12-17
• /
• 1991

In this paper, E-plane gap-coupled rectangular microstrip antennas with parasitic elements are analyzed. The mutual coupling between the radiating edges is represented as the voltage-dependent current source. The gap coupling between the patch and parasitic element is characterized with the REC(Radiating Edges-Coupling) model, and the conventional transmission line model is used to obtain the equivalent circuit of the antenna. The return loss of the rectangular microstrip antennas with short-and open-circuit parasitic elements are calculated and compared with the measured values. The theoretical values including the mutual coupling are more in agreement with the measured values than the calculated values without the mutual coupling.

• 대한전자공학회논문지
• /
• 제20권3호
• /
• pp.40-44
• /
• 1983

원판형 마이크로스트립 패치를 기본 소자로 하여 준 대수 주각형 광대역 마이크로스트립 안테나를 설계한다. 각 방사소자들은 종단이 개방된 주급전 마이크로스트립 선로상에서 정합선로를 통하여 직열 급전된다. 설계 제작된 안테나의 정재파비는 주파수 2.72∼3.43GHz 범위내에서 약 2.3이하로 됨이 실험적 결과로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.29-31
• /
• 2007

In this paper we propose an directional analytic approach in image data space for X-ray image which is detected from the X-ray projection system. Such a radiographic nondestructive testing has long been used for steel-tube inspection and weld monitoring. The welded area and thickness of steel-tube are detected from gradient radiating mechanism based on the evaluation of biased X-ray source position. The welded area is an ellipse type on low contrast X-ray image including noise. Noise originates from most of elements of the system. such as shielding CCD camera, imaging screen, X-ray source, inspected object, electronic circuits and etc.. Projection incorrectness and noise influence on imaging quality is to be represented by vertical pixels' distribution. Space analysis due to vertical direction also shows the segmental possibility between regions by visual edge evaluation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.215-216
• /
• 2006

In this paper, the antenna the with linear active phased array of $1{\times}16$ operated in DBS band was designed. The antenna was composed of sixteen radiating elements, sixteen active channels and five Wilkinson power combiners with 4-channel inputs, a digital control board and a stabilizing DC bias board. The radiating element of the array has the structure of a microstrip stack patch with a left-hand circular polarization. And, each active channel consists of a low noise ampilifier, a 3-bit digital phase shifter and a variable analog attenuator. The breadboard of linear active phased array antenna was also fabricated to test the electrical performances. The radiation patterns of the antenna were measured after correcting initial phases of each active channel in aechoic chamber. And also, the beam scanning chracteristcs of $10^{\circ}$, $20^{\circ}$, $30^{\circ}$ were measured.