• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.549-552
• /
• 2002

The objective of this study is to clarify the detailed performances of the impulse type radial turbine and to present an optimum configuration of the turbine. The impulse type radial turbine has been manufactured and investigated experimentally under steady and sinusoidally oscillating flow conditions by model testing. Then, the starting characteristics under sinusoidally flow conditions have been evaluated by a numerical simulation using a quasi-steady analysis. As a result, the running and starting characteristics of the impulse type radial turbine for wave energy conversion have been clarified. Furthermore, the recommended configuration is presented, especially for setting angles of inner and outer guide vanes.

• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.898-906
• /
• 2008

본 연구에 적용된 터빈은 2단으로 구성되며, 첫 번째 단에는 축류형 터빈이 적용되고 두 번째 단에는 반경류형 터빈이 적용되었다. 축류형 터빈에서 동익의 평균반경은 70mm 이며, 반경류형 터빈의 외경은 입구에서 68mm였다. 실험에서 반경류형 터빈의 경우에는 두 개의 다른 형태가 적용되었으며, 최적의 설계변수를 확인하기 위하여 노즐의 각도를 3가지로 변경하면서 실험을 수행하였다. 터빈의 형상에 따른 성능평가를 위하여 총비토오크를 기준으로 비교하였다. 실험의 결과에서 낮은 부분분사에서 작동하면서 고토오크를 얻기 위한 소형터빈의 성능에는 노즐 각도가 가장 중요한 설계변수임을 보여주었다. 부분분사율이 3.4%이면서 노즐의 분사각도가 $75^{\circ}$인 경우에 두 번째 단에 반경류형 터빈을 장착하였을 때 총비토오크는 13%향상하는 결과를 보여주었다.

• 한국유체기계학회 논문집
• /
• 제18권5호
• /
• pp.42-48
• /
• 2015

To improve the core technology of the micro gas turbine, the performance test facility was developed. This paper is focusing on the explanation of the characteristics of micro gas turbine and its assist devices. Major part of micro gas turbine were radial type of compressor, annular type of combustor, radial type of turbine, thrust foil bearing, radial foil bearing and generator. The assist devices were consist of exhaust duct, inverter, data acquisition system, load bank and test cell. Before building up the test facility, the component test was previously conducted to confirm the component performance. After the test facility was prepared, the motoring test was conducted to investigate the rotor dynamic characteristics of the micro gas turbine. Also, the part load performance test was performed. With a developed micro gas turbine test facility, the improved core technology about the micro gas turbine can be suggested to the related industries.

• 한국항공우주학회지
• /
• 제38권9호
• /
• pp.943-954
• /
• 2010

본 연구에 적용된 터빈은 반경류형이며, 동익의 외경은 108 mm이다. 터빈은 1.4-4.1%의 낮은 부분분사율에서 작동하므로 익형은 축류형으로 설계되었으며 3단으로 구성되었다. 터빈에서 부분분사율과 팁간극 및 노즐유동각의 변화에 따른 성능의 변화를 측정하였다. 또한 터빈의 단수를 변경하면서 각 단수에서 발생되는 출력의 차이에 대한 측정이 이루어졌다. 본 연구의 터빈은 다양한 작동조건에서 운전되므로 넓은 작동범위에 따른 비교를 위하여 회전수를 변경하면서 탈설계 영역에서의 성능 평가가 이루어졌다. 뿐만 아니라 다양한 작동조건에 합당한 시스템의 평가를 위하여 총비오크가 얻어졌다. 아울러 소형터빈의 설계 및 성능예측을 위하여 유동해석을 수행하였으며 얻어진 예측의 결과는 실험으로 얻어진 결과와 잘 일치하였다.

• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.1-7
• /
• 2013

본 연구는 보조동력장치에 적용되는 구심터빈의 공력성능시험을 한국항공우주연구원의 고온 터빈 시험리그에서 수행한 결과이다. 리그시험을 위하여 터빈의 형상은 동일하되 팽창비, 마하수 및 유량계수는 실제 엔진과 동일한 값이 되도록 상사법칙을 적용하여 시험하였다. 설계 팽창비는 3.096이며, 상사된 설계회전수는 34909 rpm이고 상사된 터빈 입구온도는 $160^{\circ}C$이다. 터빈의 입구에는 익형 형상의 노즐이 설치되었으며 터빈 휠의 직경은 175.74mm이다. 시험을 통하여 터빈의 성능지도가 생성되었으며 터빈 입구에서의 상세 유동이 측정되었다. 노즐의 허브면에서 측정한 압력과 노즐의 쉬라우드 면과 터빈 휠 케이싱에서 측정한 압력 분포를 볼 때 터빈 내부에서의 팽창과정이 적절함을 확인할 수 있었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권12호
• /
• pp.704-713
• /
• 2002

This paper describes operational characteristics of wind turbine induction generators interconnected with distribution networks using PSCAD/EMTDC. Due to the simple and durable structure, induction generators are the most common type used in wind Power generation. Generally, induction generators are classified into two groups according to the shape of rotor, one is squirrel-cage type and the other is wound-rotor type. In this study, we simulate the start-up and the output variation of generators interconnected with distribution networks and compare the operational characteristics of squirrel -cage type and wound-rotor type induction generators located in the unfaulted distribution lines about the disturbance occurred on the associated distribution feeders emanated from the substation to which wind turbine generator is connected. In order to obtain the realistic results, we use the radial distribution network of IEEE 13-bus model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3050-3055
• /
• 2007

A wind turbine is one of the most popular energy conversion systems to generate electricity from the natural renewable energy source and an axial-flow type wind turbine is the most popular system for the electricity generation in the wind farm nowadays. In this study, a cross-flow type turbine has been studied for the application of wind turbine for electricity generation. The target capacity of electric power generation of the model wind turbine developing on the project is 12 volts, 130A/H (about 1.56kW). The important design parameters of the model turbine impeller are the inlet and exit angle of the turbine blade, number of blade, hub/tip ratio and the exit flow angle of the casing. In this study, the radial equilibrium theorem was used to decide the inlet and exit angle of the impller blade and CFD technique was used to have the performance analysis of the designed model power turbine to find out the optimum geometry of the CPT impeller and casing. The designed CPT with 24 impeller blades at ${\alpha}=82^{\circ}$, ${\beta}=40^{\circ}$ of turbine blade angle was estimated to generate 284.6 N.m of indicated torque and 2.14kW of indicated power.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1309-1312
• /
• 2002

The electric power network paralleled with wind turbine generator may have the negative impacts on the protection, operation, and management caused by the operation of wind turbine generator. Therefore, it is necessary to investigate the operating characteristic of wind turbine generator. This paper describes model of a squirrel-cage type wind turbine induction generator and the soft cut-in connection method for reducing the transient state on power network, and simulates various cases of wind turbine operations. The radial distribution network of IEEE 13-bus are modeled and tested by PSCAD/EMTDC.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.179.2-179.2
• /
• 2010

This research has been performed to provide fundamental design aspects of Permanent Magnet Synchronous Generators(PMSGs) for a kilowatt class wind turbine. When it comes to kilowatt class wind turbines, the typical type of generators are Axial Flux Permanent Magnet(AFPM) generators. However, Radial Flux Permanent Magnet(RFPM) generators have been optimally designed to study the output characteristics of a kilowatt class wind turbine in Graduate School of Wind Energy, POSTECH. An existing squirrel-cage rotor has been modified for another newly designed permanent magnet rotor to utilize the commercially existing stator rotor. Electromagnetic analysis utilizing Finite Element Methods tools(ANSYS, MAXWELL 2D) has been applied to analyze the system.

• 한국유체기계학회 논문집
• /
• 제16권3호
• /
• pp.10-17
• /
• 2013

The organic Rankine cycle has been widely used to convert the renewable energy such as the solar energy, the geothermal energy, or the waste energy etc., to the electric power. Some previous studies focused to find what kind of refrigerant would be a best working fluid for the organic Rankine cycle. In this study, R245fa was chosen to the working fluid, and the cycle analysis was conducted for the output power of 30kW or less. In addition, properties (temperature, pressure, entropy, and enthalpy etc.) of the working fluid on the cycle were predicted when the turbine output power was controlled by adjusting the mass flowrate. The configuration of the turbine was a radial-type and the supersonic nozzles were applied as the stator. So, the turbine was operated in partial admission. The turbine efficiency and the optimum velocity ratio were considered in the cycle analysis for the low partial admission rate. The computed results show that the system efficiency is affected by the partial admission rate more than the temperature of the evaporator.