• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.149-152
• /
• 2009

직접분사방식 추력기 노즐오리피스로부터 분사되는 분무입자의 발달특성을 연구하기 위해 분무의 다양한 위치에서 평균속도, 직경, 그리고 부피유속과 같은 분무특성인자들을 측정한다. 실험 결과로부터, 고속의 큰 직경을 갖는 분무 입자들이 주변 공기로의 운동량 손실로 인해 하류로 이동함에 따라 저속의 작은 입자로 분열한다. 또, 분무 확산 및 분산에 의해 높은 부피유속의 영역이 반경방향으로 넓게 확장된다.

• 천문학회보
• /
• 제37권1호
• /
• pp.57.1-57.1
• /
• 2012

We present a spectroscopic study of the globular clusters (GCs) in the giant elliptical galaxy (gE) M86 in the Virgo galaxy cluster. Using the spectra obtained from the Multi-Object Spectroscopy (MOS) mode of Faint Object Camera and Spectrograph (FOCAS) on the Subaru Telescope, we measured the radial velocities of 25 GCs, the metallicities of 16 GCs, and the ages of 8 GCs in M86. The mean velocity and the vocity dispersion of the GCs are < ${\upsilon}_p$ > = -354 ${\pm}$ 80 km/s and ${\sigma}_p$ = 292 ${\pm}$ 32km/s, respectively. The M86 GC system shows some rotation with a large uncertainty and the velocity dispersion of the blue GC system is 60 km/s larger than that of the red GC system. The mean metallicity and age of M86 GCs are <[Fe/H]> = -1.13 ${\pm}$ 0.47 and = 9.7 ${\pm}$ 4.0 Gyr, respectively. We found one GC younger than 5 Gyr. We discuss the spectroscopic results of the M86 GC system in comparison with the GC systems in other gEs.

• 천문학회보
• /
• 제37권1호
• /
• pp.90.1-90.1
• /
• 2012

Understanding the dynamics of relativistic electron acceleration, loss, and transport in the Earth's radiation belt during magnetic storms is a challenging task. The U.S. National Science Foundation's Geospace Environment Modeling (GEM) has identified five magnetic storms for in-depth study that occurred during the second half of the Combined Release and Radiation Effects Satellite (CRRES) mission in the year 1991. In this study, we show the responses of relativistic radiation belt electrons to the magnetic storms by comparing the time-dependent 3-D Versatile Electron Radiation Belt (VERB) simulations with the CRRES MEA 1 MeV electron observations in order to investigate the relative roles of the competing effects of previously proposed scattering mechanisms at different storm phases, as well as to examine the extent to which the simulations can reproduce observations. The major scattering processes in our model are radial transport due to Ultra Low Frequency (ULF) electromagnetic fluctuations, pitch-angle and energy diffusion including mixed diffusion by whistler mode chorus waves outside the plasmasphere, and pitch-angle scattering by plasmaspheric hiss inside the plasmasphere. We provide a detailed description of simulations for each of the GEM storm events.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.83-101
• /
• 1992

A systematic method of remeshing is required due to severe mesh distortion after some finite deformation in the finite element analysis of practical forging processes. In order to cope with the problem of mesh degeneracy during deformation, the proper design of meshes plays an improtant role in the analysis. In so-called "Modular Remeshing", the physical characteristics of metal flow and geometric characteristics are incorporated in "Module", which can be applied to the mesh design for a certain mode of deformation in so far as the topology of deforming region remains the same. For the purpose of more effective and systematic use of the modular remeshing scheme, an expert system has been developed in the framework of the proposed remeshing schemel. In oredr to show the effectiveness of the method, the rib-web type forging with axial relief or radial relief and spike forging are simulated. It has been thus shown that the proposed method of automatic remeshing by using modular remeshing and expert system can be futher extended and applied to various forging problems with complicated geometrical configurations.ical configurations.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.170-177
• /
• 1998

The purpose of superconducting magnetic bearing flywheel energy storage system(SMB-FESS) is to store unused nighttime electricity as kinetic energy and convert it to electricity during daytime. The SMB-FESS is proposed as an efficient energy storage system because there is no mechanical problems, such as friction and wear The flywheel over SMB is rotated at a high speed, 50,000rpm. The major source of energy loss in the SMB-FESS is vibration of flywheel. Therefore, the vibration characteristics of SMB-FESS should be identified. In this study, the axial/radial stiffness and damping coefficient of SMB are measured by a vibration test. Natural frequencies and natural modes of flywheel and magnet are analyzed by a finite element method. The modal analysis of system is performed using the modal parameters of each component and the measured stiffness/damping coefficient. So, natural at frequencies and mode shapes of the joined system can be obtained. According to critical speed analysis, the system has two rigid conical modes in the low speed range. Nevertheless, the system has not been affected by the critical speed in the main operating range.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.540-545
• /
• 2001

In case of small motors, coil bundle occupies a large portion of stator in view of mass and volume as well as dynamics. It is observed through modal test on the stator of an IPM BLDC (interior permanent magnet brushless direct current) motor that coil bundle wound on the stator core causes the first and second natural frequencies to decrease by about 20-30% compared with those of bare stator. Especially the third natural frequency is newly observed below 3 KHz, which is not observed on the bare stator. It is found that at the third mode the end-coil and the core vibrate out of phase in radial direction. In this paper, the stator is dynamically modeled in terms of the core and the coil bundle consisting of the end-coil and the slot coil based on the above observations for the prediction of dynamic properties. The core can easily be modeled using finite element method with its actual material properties and geometric shape. The concept of equivalent bending stiffness is used for modeling of the end-coil so that predictions may match with the measured natural frequencies for the end-coil cut out of the stator. Although the same concept can be applied to the slot coil, separation of the slot coil from the stator is impractical. Therefore, equivalent bending stiffness of the slot coil is determined through iterative comparisons with the measurements of natural frequencies of the stator with the slot coil in it.

• 소음진동
• /
• 제8권1호
• /
• pp.81-86
• /
• 1998

A 500Wh class high-speed Flywheel Energy Storage System (FESS) driven by a built-in BLDC motor/generator has been designed, which runs from 30000 to 60000rpm nominally. Due to the motor/generator inside, the flywheel rotor made of composites supported by PM/EM hybrid bearing system has a shape of bell or pendulum and thus requires accurate rotordynamic analysis and prediction of its dynamic behavior to secure the operating reliability. Rotordynamic analyses of the flywheel rotor-bearing system revealed that the bell shaped rotor has two conical rigid-body modes in the system operating range and the first conical mode, of which nodal point lies in the radial EM bearing position, can adversely affect the dynamic response of the rotor at the corresponding critical speed. To eliminate the possibility of wild behavior of the rotor, two guide bearings are adopted at the upper end of the rotor and motor/generator. It was also revealed that the EM bearing stiffness if 0.5~1.0E+6 N/m and damping of 2000 Ns/m are favirable for smooth operation of the system around the 2nd critical speed.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.127-136
• /
• 2007

본 논문에서는 비동질 반무한 평면에 대한 비례경계유한요소법의 식을 유도하고 수치예제를 해석하였다. 비례경계유한 요소법은 편미분 방정식을 경계방향으로는 유한요소와 같은 근사를 통해서 약화시키고 방사방향으로는 정확해를 사용하는 반 해석적인 방법으로, 방사방향으로 멱함수를 따라 탄성계수가 변화되는 반무한 평면에 대해서 관계식을 가상일의 원리에 근거하여 새로이 유도하였다. 이 과정에서 반무한평면의 거동이 Euler-Cauchy방정식을 따름을 보이고, 기존의 동질 반무한평면의 해석시 도입되던 로그모드가 비동질 반무한 평면의 해석에는 유효하지 않음을 보였다. 수치예제를 통하여 유도된 식이 타당한 거동을 보임을 증명하고 이 접근법이 실제 공학적 문제의 해결에 있어서 유용함을 보였다.

• 센서학회지
• /
• 제4권2호
• /
• pp.22-28
• /
• 1995

인가 전압에 의해 수축 팽창하는 원통형 PZT tube와 단일모드 광섬유를 이용하여 마이켈슨 간섭계형 교류 전류센서를 제작하였다. 본 연구에 사용된 신호처리장치는 측정전류의 주파수에 무관하게 전류의 크기를 측정할 수 있었다. 전류의 크기는 교류 전류의 반주기 내에 생기는 간섭무늬의 개수로 측정하였다. 간섭무늬의 개수는 전류의 크기에 따라 선형적으로 변화하였으며, 온도변화($-20^{\circ}C{\sim}\;80^{\circ}C$)에 따른 오차는 5% 이내였다.

• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1193-1201
• /
• 2013

Improved far field type(improved type) megasonic applicable to the cleaning equipment of single wafer processing type has been developed. In this study, to improve the uniformity of acoustic pressure distribution(APD), we utilize far field with relatively uniform APD, piezoelectric ceramic with a triangle hole in its center to prevent standing wave resulted from radial mode, and reflected wave from the wall of waveguide. On the basis of these methods, two analysis models of improved type were designed to which piezoelectric ceramic of different shape of electrode attached, and APD were analyzed by means of finite element method, and then one of them was selected by analysis results, finally, the selected model was fabricated. Test results show that the fabricated is better in the uniformity of APD than the imported and the conventional, also the fabricated shows high particle removal efficiency of 92.3% using DI water alone as a cleaning solution.