• Journal of Information Processing Systems
• /
• v.16 no.4
• /
• pp.774-783
• /
• 2020

For the issue of subsurface target localization by reverse projection, a new approach of target localization with different distances based on symmetric sub-array multiple-input multiple-output (MIMO) radar is proposed in this paper. By utilizing the particularity of structure of the two symmetric sub-arrays, the received signals are jointly reconstructed to eliminate the distance information from the steering vectors. The distance-independent direction of arrival (DOA) estimates are acquired, and the localizations of subsurface targets with different distances are realized by reverse projection. According to the localization mechanism and application characteristics of the proposed algorithm, the grid zooming method based on spatial segmentation is used to optimize the locaiton efficiency. Simulation results demonstrate the effectiveness of the proposed localization method and optimization scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.1
• /
• pp.19-25
• /
• 2013

In this paper, we proposed an enhanced monopulse MIMO radar system for the tactical scenario where the ground receivers are connected wireless backhaul and closely spaced. By applying the ${\alpha}{\beta}$ filter to the conventional monopulse MIMO radar, we show that the localization performance can be improved significantly. We also propose an efficient localization algorithm for a system with lower rate feedback. Using numerical simulations, we demonstrate that the proposed scheme can improve the localization performance while reducing the feedback over conventional scheme.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.904-912
• /
• 2011

In this paper, we have proposed a M&S tool for analyzing detection coverage and target localization in bistatic radar system. The detection coverage determined by radar parameters is meaningful when it satisfies the clear line-of-sight condition. We improved the method to find the minimum altitudes of transmitter and receiver for meeting the condition by considering three-dimensional coverage. Its computational burden is not problematic because the calculation is for maximizing the performance of the radar and does not demand a real-time operation. In addition, target localization on three-dimensional earth model based on the information of the height, longitude, and latitude is proposed instead of the previous unpractical calculation on two-dimensional bistatic plane. Its precalculated result can reduce its computation burden and it is suitable for real-time estimation of target location.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.3
• /
• pp.315-321
• /
• 2023

In this paper, we propose an algorithm that jointly estimates the location and velocity of a near-field moving target in a pulse radar system. The proposed algorithm estimates the location and velocity corresponding to the outcome of orthogonal matching pursuit (OMP) in a 4-dimensional (4D) location-velocity space. To address the high computational complexity of 4D parameter joint estimation, we propose an algorithm that iteratively estimates the target's 2D location and velocity sequentially. Through simulations, we analyze the estimation performance and verify the computational efficiency of the proposed algorithm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.9
• /
• pp.889-895
• /
• 2011

In recent days, some techniques to prevent from radar detection have been applied on aircraft system. RWR(Radar Warning Receiver) can be used for estimating the source location of the aircraft which emits radar pulse. Current existing method of localizing radar pulse emission source is using AOA(Angle Of Arrival) and most techniques are focused on finding exact AOA to find exact location. In this case, however, the exact AOA does not always result in finding exact source location while target aircraft is moving fast. In this paper, a localization method using the phase delay of the radar pulse's low frequency applies and so a scanning method for the interest area does in order to estimate exact source location by using phase delay.

• Smart Media Journal
• /
• v.8 no.4
• /
• pp.85-90
• /
• 2019

The Ultra-Wide Band sensor is widely used as a wireless indoor localization technology with frequency bands in the GHz range. Meanwhile, in museums, not only the real-time location of visitors but also information on visit route and duration time is required for patrons' behavior analysis. In this paper, the analysis system based Ultra-Wide Band radar for visitor's viewing behavior is introduced and experimented in the real environment. We built the system in National Museum of Korea, and its 22 Ultra-Wide Band radar sensors receive the real-time location of their visitors: this analyzes the visit route and visit time for patrons.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.10
• /
• pp.819-824
• /
• 2017

This paper presents a target localization scheme for distributed Multi-input Multi-output(MIMO) radar system using ToA measurements obtained from multiple transmitter and receiver pairs. The proposed method can locate the target from an arbitrary initial point by iteratively finding the Taylor linear approximation equation. The simulation results show that proposed method achieves the better mean square error(MSE) performance than the existing target localization methods, and furthermore, attains Cramer-Rao Lower Bound(CRLB).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.1
• /
• pp.87-95
• /
• 2016

Recently, the interests of the precise localization are rapidly increasing, which are linked to IoT(Internet of Things) sensors. The precise localization in indoor environment can be utilized in navigation, security, anti-collision, and various location based services etc. However, conventional positioning sensors, such as PIR, ultrasonic, microwave etc. are vulnerable to weather or insensitive to direction of subject movement or low precision performance. In this paper we implement a UWB-IR localization system for long distance and high-precision localization, which is not affected by temperature, light and weather. The proposed system was divided and designed by H/W, Antenna, S/W parts, each of which was designed based on an accurate analysis and simulation. As a result, we can implemented and verified UWB IR system with precise localization performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.12
• /
• pp.1173-1180
• /
• 2013

High Resolution Range Profile-Jet Engine Modulation imagery first introduced in 2005 carries out radar target recognition by localizing the position of the jet engine installed on the aircraft target. This paper presents a new approach for estimating the jet engine position in the HRRP-JEM image based on the eccentricity of a complex signal. It can effectively evaluate the contribution of the JEM component to the radar received signal in a range bin of the HRRP-JEM image. Therefore, the localization is expected to be performed more quantitatively and reliably by pinpointing the range bin corresponding to the jet engine position where the JEM contribution is maximized. The simulation results of realistic aircraft models validated the effectiveness of the proposed concept.