• Title/Summary/Keyword: Radar Flow-meter

Search Result 6, Processing Time 0.025 seconds

Design of FMCW radar waveform for flow measurement (유량 측정을 위한 FMCW 레이다 파형 설계)

  • Lee, Changki
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.24 no.1
    • /
    • pp.83-90
    • /
    • 2020
  • A commercial flow measurement radar sensor estimates a quantity of flowed water using surface flow rate. In this way, the amount of water flowing per unit time cannot be measured accurately because of using an estimation result and it can't response environmental changes. For more accurate flow measurements we need width of waterway, water level and distance that water moved per unit time. Commonly two sensors are used to measure water level and flow rate. In this paper, we propose a method to simultaneously measure the water level and surface flow velocity using a single FMCW radar sensor and design the transmission waveform. In order to verify the waveform design, received signal is modelled based on transmission waveform. In addition, we consider phenomenons and problems that may occur in signal processing.

Research on Real-time Flow Rate Measurement and Flood Forecast System Based on Radar Sensors (레이다 센서 기반 실시간 유량 측정 및 홍수 예측 시스템 연구)

  • Lee, Young-Woo;Seok, Hyuk-Jun;Jung, Kee-Heon;Na, Kuk-Jin;Lee, Seung-Kyu
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2022.05a
    • /
    • pp.288-290
    • /
    • 2022
  • As part of the SOC digitization for smart water management and flood prevention, the government reported that automatic and remote control system for drainage facilities (180 billion won) to 57% of national rivers and established a real-time monitoring system (30 billion won). In addition, they were also planning to establish a smart dam safety management system (15 billion won) based on big data at 11 regions. Therefore, research is needed for smart water management and flood prevention system that can accurately calculate the flow rate through real-time flow rate measurement of rivers. In particular, the most important thing to improve the system implementation and accuracy is to ensure the accuracy of real-time flow rate measurements. To this end, radar sensors for measuring the flow rate of electromagnetic waves in the United States and Europe have been introduced and applied to the system in Korea, but demand for improvement of the system continues due to high price range and performance. Consequently, we would like to propose an improved flow rate measurement and flood forecast system by developing a radar sensor for measuring the electromagnetic surface current meter for real-time flow rate measurement.

  • PDF

Development of flow measurement method using drones in flood season (II) - application of surface velocity doppler radar (드론을 이용한 홍수기 유량측정방법 개발(II) - 전자파표면유속계 적용)

  • Lee, Tae Hee;Kang, Jong Wan;Lee, Ki Sung;Lee, Sin Jae
    • Journal of Korea Water Resources Association
    • /
    • v.54 no.11
    • /
    • pp.903-913
    • /
    • 2021
  • In the flood season, the measurement of the river discharge has many restrictions due to reasons such as budget, manpower, safety, convenience in measurement and so on. In particular, when heavy rain events occur due to typhoons, etc., it is difficult to measure the amount of flood due to the above problems. In order to improve this problem, in this study, a method was developed that can measure the river discharge in a flood season simply and safely in a short time with minimal manpower by combining the functions of a drone and a surface velocity doppler radar. To overcome the mechanical limitations of drones caused by weather issues such as wind and rainfall derived from the measurement of the river discharge using the conventional drone, we developed a drone with P56 grade dustproof and waterproof performance, stable flight capability at a wind speed of up to 36 km/h, and a payload weight of up to 10 kg. Further, to eliminate vibration which is the most important constraint factor in the measurement with a surface velocity doppler radar, a damper plate was developed as a device that combines a drone and a surface velocity Doppler radar. The velocity meter DSVM (Dron and Surface Veloctity Meter using doppler radar) that combines the flight equipment with the velocity meter was produced. The error of ±3.5% occurred as a result of measuring the river discharge using DSVM at the point of Geumsan-gun (Hwangpunggyo) located at Bonghwang stream (the first tributary stream of the Geum River). In addition, when calculating the mean velocity from the measured surface velocity, the measurement was performed using ADCP simultaneously to improve accuracy, and the mean velocity conversion factor (0.92) was calculated by comparing the mean velocity. In this study, the discharge measured by combining a drone and a surface velocity meter was compared with the discharge measured using ADCP and floats, so that the application and utility of DSVM was confirmed.

Flood Runoff Measurements using Surface Image Velocimetry (표면영상유속계(SIV)를 이용한 홍수유출량 측정)

  • Kim, Yong-Seok;Yang, Sung-Kee;Yu, Kwon-Kyu;Kim, Dong-Su
    • Journal of Environmental Science International
    • /
    • v.22 no.5
    • /
    • pp.581-589
    • /
    • 2013
  • Surface Image Velocimetry(SIV) is an instrument to measure water surface velocity by using image processing techniques. Since SIV is a non-contact type measurement method, it is very effective and useful to measure water surface velocity for steep mountainous streams, such as streams in Jeju island. In the present study, a surface imaging velocimetry system was used to calculate the flow rate for flood event due to a typhoon. At the same time, two types of electromagnetic surface velocimetries (electromagnetic surface current meter and Kalesto) were used to observe flow velocities and compare the accuracies of each instrument. The comparison showed that for velocity distributions root mean square error(RMSE) was 0.33 and R-squared was 0.72. For discharge measurements, root mean square error(RMSE) reached 6.04 and R-squared did 0.92. It means that surface image velocimetry could be used as an alternative method for electromagnetic surface velocimetries in measuring flood discharge.

Tractor Performance Instrumentation System

  • Wan Ismail, Wan Ishak;Yahya, Azmi;Bardaie, Mohd. Zohadie
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1996.06c
    • /
    • pp.569-581
    • /
    • 1996
  • A microcomputer -based data acquistion system was designed and developed at Michigan State University , USA to conduct field data studies. The system designed for the research carried out used an Apple IIe microcomputer for collecting data on-board the tractor. An AII3 Analog to Digital (A/D_ convertor was chosen to interface each analog signal to the microcomputer. A commercially available Dj TPM II was employed to display information such as an engine speed, ground speed, percent drive wheel slip , distance travelled and area covered per hour. The frequency output from the radar unit was channeled through a frequency to voltage (F/V) convertor , so that AII3 Analog to Digital (A/D) convertor could read it. The fuel consumption was measured using on EMCO pdp-1 fuel flow meter attached to the engine fuel line. The draft of the tillage and other drag equipment was determined using strain gages attached to the drawbar of the tractor. The system was developed to collect the draft and fuel requirements for various farm equipment different kind of soils.

  • PDF

Multi-Section Flow Measurement Method Using Radar(Electromagnetic) Surface Flow meter (레이더(전자파) 표면유속계를 이용한 다측점 유량측정 방법)

  • Kwang Tae Choi;Jang Hyun Sung
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.449-449
    • /
    • 2023
  • 유량은 도섭법, 보트법, 횡측선법, 교량법 및 부자법 등 다양한 방법으로 측정되는데, 이들 측정방법 모두 많은 수의 관측자를 필요로 한다. 이들은 하천에 직접 들어가서 측정하거나, 인공구조물인 교량과 재방에서 측정되는데, 도섭법, 보트법, 횡측선법이 전자이며, 고수위 및 고유속으로 하천에 들어가지 못하는 경우에는 교량법 및 부자법을 사용하여 유량을 측정한다. 최근 지구 온난화로 따른 이상 기후가 빈번히 발생하고 있으며, 이로 인한 많은 피해가 발생하고 있어, 하천 수위, 유속 모니터링에 대한 중요성이 더 커지고 있다. 2022년 1월부터 시행 중인 「중대재해처벌법」으로 집중호우 및 일몰 이후에는 안전상의 문제로 유량측정이 어려운 상황으로 필요한 시기에 유량 데이터를 확보에 제약이 있다. 이에 관측자 없이도 유량을 측정할 수 있는 방법을 이용하여 중대 재해의 위험성을 해소하고자 하였다. 유량측정 방법으로 설치 회수가 용이한 비접촉 방식에서 영상표면유속측정 방식과 레이더(전자파)표면 유속측정 방식 중, 집중호우 및 태풍 발생 중 가시성이 확보되지 않아도 측정이 가능한 레이더(전자파) 표면유속계를 이용한 다측점 유량측정 방법을 개발하였다. 비접촉 다측점 유량측정시스템 Master 1대에 8대의 Slave를 연결할 수 있어 총 9개의 측선을 측정할 수 있게 개발하였다. 특히, 하천 및 수로 등의 표면 유속을 비접촉으로 측정하고 하천 단면을 이용하여 유량측정이 가능한 장비로 별도의 수중 및 수상 주조물 작업이 필요 없고 장비의 손상 및 유실 가능성이 거의 없고 역류 상태에서도 측정이 가능하다. 유속은 24GHz의 레이더 주파수를 송수신하여 도플러 변이를 이용하여 측정하였고, 수위는 80GHz의 레이더 주파수를 사용하여 왕복 시간을 거리로 환산하여 측정하였다. 유량은 각각의 유속계에 단면을 입력해 놓으면 유속분포법, 중간단면적법 및 지표유속법을 적용하여, 각각의 측선에 대한유량과 총 유량을 산출하였다. 그 결과, 기존 방식 대비 상당한 개선 효과를 확인하였고, 향후 환경부 등 중앙부처의 수문조사 사업에서 그 역할이 기대된다.

  • PDF