• 제목/요약/키워드: Race Ring

검색결과 34건 처리시간 0.021초

이종재료 마찰용접에 의한 초내열합금 대형 배기밸브 스핀들 개발 (Development of Large Superalloy Exhaust Valve Spindle by Dissimilar Inertia Welding Process)

  • 박희천;정호승;조종래;이낙규;오중석;한명섭
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제29권8호
    • /
    • pp.891-898
    • /
    • 2005
  • Inertia welding is a solid-state welding process in which butt welds in materials are made in bar and in ring form at the joint race, and energy required lot welding is obtained from a rotating flywheel. The stored energy is converted to frictional heat at the interface under axial load. The quality of the welded joint depends on many parameters, including axial force, initial revolution speed and energy amount of upset. working time, and residual stresses in the joint. Inertia welding was conducted to make the large exhaust valve spindle for low speed marine diesel engine. superalloy Nimonic 80A for valve head of 540mm and high alloy SNCrW for valve stem of 115mm. Due to different material characteristics such as, thermal conductivity and flow stress. on the two sides of the weld interface, modeling is crucial in determining the optimal weld geometry and Parameters. FE simulation was performed by the commercial code DEFORM-2D. A good agreement between the Predicted and actual welded shape is observed. It is expected that modeling will significantly reduce the number of experimental trials needed to determine the weld parameters. especially for welds for which are very expensive materials or large shaft. Many kinds of tests, including macro and microstructure observation, chemical composition tensile , hardness and fatigue test , are conducted to evaluate the qualify of welded joints. Based on the results of the tests it can be concluded that the inertia welding joints of the superalloy exhaust valve spindle are better properties than the material specification of SNCrW.

삼국시대(三國時代) 병기체제(兵器體制)의 연구(硏究) (This Study of the Arms Used in the Three Kingdoms)

  • 김성태
    • 헤리티지:역사와 과학
    • /
    • 제34권
    • /
    • pp.20-58
    • /
    • 2001
  • In order to unravel the characteristics of arms used in the 'Three Kingdoms,' Kokuryo, Silla and Paikje. the classification and the developing procedures of the arms should be first discussed. At first, the basic arms of the soldiers of Three Kingdoms were iron swords, iron spearheads, and bows. During that period, swords attached a ring pommel were commonly used. But after 5A. D. a sword with a decoration pommel appeared. Infantry generally used iron spearheads. From the late 4A. D. the long spearheads were broadly used in cavalry battles. In the late 6A. D. infantry mainly used long spearheads, and this resulted in the foundation of long spearheads units. There were two kinds of bows: Short Bow whose arch is small and Long Bow whose arch is long. It is known that the Short Bow was widely used in Kokuryo and Paikje up to 5A. D. In the early era, infantry used Long Bow, yet it was vastly used after 6A. D. when a castle's strategical value was great and defending a castle was. significant. Above mentioned, as basic combat weapons, iron spearhead and bow were fundamental. In particular, the spearhead was the essential weapon to a soldier. Yet, arrow gun and hook-shape cutters were important weapons. Especially, after 6A.D., when a castle became strategically pivotal in military, the arrow gun became the important weapon. This resulted in the foundation of arrow gun units. Hook-shape cutters were used to snatch horsemen or to climb up to fall the castle. Yet, the cutter was not the Three Kingodoms' basic weapon. In addition, the three stages of arms development in the Three Kingdoms are formation stage, development stage, and settlement stage. The formation stage was the period when premitive military unit appeared in the Three Kingdoms. It ranged from 1B. C. to the mid 3A. D. At that time according to regions. there were two weapon systems operating: North area including Kokuryo and the northern part of Paikje and South area including Silla, Kaya and the southern part of Paikje. ln North area a sword with a ring attached at the end of the holder, iron spear with neck and mid-size flat holder and iron arrowhead with an extension to fix, were used. In this period, during a war calvary units were mostly used and their weapon systems seemed possibly to succeed in that of Kochosun. In the development stage, when LoLang's influence on surroundings became weak, Koguryo, Paikjae and Silla had directly contacted each other. In the late 3A.D. to the early 6A.D., Silla achieved a drastic improvement in weapon system. This was the period when Kokuryo played a leading role in arms race. Kokuryo's arms manufacturing techniques passed onto Silla, Kaya and Paikje. In combat strategy a joint operation between infantry and calvary prevailed even if their military tactics were different. In a calvary battle heavily armed horsemen played import roles at this period. The horsemen and even horses were heavily guarded with iron armors. After all, the appearance of fully armed horsemen implies the very need of powerful destructive forces in weapon system. At that time, basic weapons were a big sword with a ring attached at the end of the holder, swallow's tail-shape spear with neck, and iron spearhead with neck and an extension. The settlement stage began at the mid 6A.D., when it was the revolutionary period in the arms development history. Of course, actual proofs and picture documents were not sufficient enough to penetrate full scale of the weapon system. But, according to historical circumstances and historic records, it is very certain that this period was the peak in arms development. In this period special military units, such as infantry-calvary companies, Archery units and Long spear units, that executed particular duties with special weapons, were founded. This became the characteristics of the settlement stage.

EEMD법을 이용한 저속 선회베어링 상태감시 (Condition Monitoring of Low Speed Slewing Bearings Based on Ensemble Empirical Mode Decomposition Method)

  • 와휴 캐서렌드라;박진희;코사시;최병근
    • 한국소음진동공학회논문집
    • /
    • 제23권2호
    • /
    • pp.131-143
    • /
    • 2013
  • 대부분의 철강산업 기계 등에 설치되어 사용되는 선회베어링은 교체를 위한 정확한 정비계획이 필요하기 때문에 저속회전체의 선회베어링에 대한 진동 상태감시가 매우 중요하게 되었다. 지금까지 음향방출(AE)법이 저속베어링의 상태감시에 가장 많이 사용되는 기술이고 몇몇의 경우는 진동을 사용한다. 음향방출을 사용하는 일반적인 이유는 저속에서 구름요소와 결함위치 사이의 충격에 의하여 발생되는 신호가 약하고 때때로 노이즈나 다른 간섭 주파수에 결함신호가 묻혀 검출이 어렵기 때문이다. 따라서 쉽게 특정 결함에 대한 결함주파수의 동정을 위하여 몇몇 연구자들은 충격에너지를 증가시키기 위하여 인위적으로 미리 정해진 길이, 넓이와 깊이의 결함을 베어링의 내, 외부 레이스에 인가하기도 한다. 이 논문에서는 15 rpm에서 운전하는 저속 선회베어링의 진동신호에 EMD와 EEMD를 적용하였고 논문에서 사용한 진동결함 신호는 국내 산업체에서 공급받은 것이다. 이 논문에서는 베어링결함 주파수 동정을 위하여 EEMD를 사용하여 결함신호의 FFT처리 결과를 입증하고 설명하였다.

토마토반점위조바이러스에 대한 재배 및 야생형 고추 수집종의 병징과 저항성 조사 (Symptom and Resistance of Cultivated and Wild Capsicum Accessions to Tomato Spotted Wilt Virus)

  • 한정헌;이원필;이준대;김미경;최홍수;윤재복
    • 식물병연구
    • /
    • 제17권1호
    • /
    • pp.59-65
    • /
    • 2011
  • 토마토반점위조바이러스(Tomato spotted wilt virus, TSWV)에 대한 고추 유전자원 및 시판품종 등 100점의 병징 유형과 저항성 반응을 조사하였다. 병징 유형과 TSWV 감염률은 접종 후 9, 12, 14, 45일에 각각 육안으로 조사하였으며, 접종 14일에는 효소면역항체법을 이용하여 실험에 사용한 모든 개체의 비 접종 상엽에서 바이러스 감염 유무를 검정하였다. 감염된 대다수의 개체에서 잎 말림 증상이 가장 빈번하게 관찰되었으며, 국내 상용 $F_1$ 품종과 재래종고추에서는 황화 증상이, 야생형 수집종에서 줄기괴사 증상이 특이적으로 관찰되었다. TSWV의 전형적인 병징으로 알려진 원형반점은 조사한 일부 계통에서 관찰되었고, 계통 내 개체간 바이러스 병징 발현 정도는 상이하였다. 상용 F1 4품종(Kpc-35, -36, -57, -62)과 야생형 고추 8계통(PBI-11, C00105, PBC076, PBC280, PBC426, PBC495, PBC537, PI201238)은 유묘기에 기계적 접종했을 때 TSWV에 대해 고도의 저항성을 보였다.