• Korean Journal of Food Science and Technology
• /
• v.34 no.6
• /
• pp.1023-1029
• /
• 2002

Relationship between RVA properties and physical properties of film made from native corn starch and hydroxypropylated corn starch at various levels of plasticizers was examinel. Tensile strength of the film decreased, but its elongation and water vapor permeability increased with increasing plasticizer concentration. The film with glycerol showed greater changes in physical properties than that with sorbitol. Hydroxypropylated starch film showed lower tensile strength, higher elongation, and higher water vapor permeability than the native starch film. Sorbitol resulted in films with relatively high tensile strength, whereas glycerol produced films with increased elongation. The most reliable parameters for the relationship between RVA properties and film properties were RVA peak viscosity, tensile strength, and water vapor permeability. Water vapor permeability and tensile strength had linear relationship with RVA properties. The tensile strength and water vapor permeability of film could be predicted using the RVA peak viscosity.

• Journal of Applied Biological Chemistry
• /
• v.51 no.6
• /
• pp.277-284
• /
• 2008

The objective of this study was to investigate the effect of soaking time on physicochemical properties of waxy rice, waxy rice flour and waxy rice starch. Waxy rice (WR), waxy rice flour (WRF), waxy rice starch (WRS) were soaked at $18^{\circ}C$ for 14 days and dried at $40^{\circ}C$. Dried samples were grounded and sieved using 180 mesh. Physicochemical properties of the three samples, such as swelling power, solubility, moisture sorption isotherms and pasting properties using rapid visco analyzer (RVA) and crystal pattern using X-ray diffractometer were determined. In all samples, soaking time greatly influenced moisture sorption isotherms but no typical pattern was shown. Swelling power was not greatly changed by soaking time in the three samples. Solubility increased with increasing soaking time in all three samples, indicating that some soluble particles were exuded during soaking. In RVA pasting properties, WR and WRF showed a similar pattern, while WRS showed different pasting properties, suggesting that rice protein plays a significant role in pasting properties. X-ray diffraction patterns of all three samples showed typical A-type crystal pattern suggesting that soaking did not affect crystalline region of samples.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.297-304
• /
• 2011

Ramen flour formulation was optimized by applying a mixture experimental design. In the optimization, the overall palatability (OP) of cooked ramen and the rheological properties of selected dough were maximized or minimized. Blended ratios of the ingredients such as Dark Northern Spring (DNS), Hard Red Winter (HRW), and Soft White (SW) were designed on a simplex-lattice. Dough rheological properties were measured by Rapid Visco Analyser (RVA), Farinograph, and Extensograph, and the overall palatability by sensory evaluation. Several principal dough rheological properties such as RVA peak viscosity (PV), Farinograph development time (DT), and Extensograph resistance/extensibility after 45 min (R/E 45 min) were selected to influence the overall palatability by canonical correlation analysis (CCA). Goals of the optimization were given as OP maximized, PV maximized, DT minimized, and R/E at 45 min maximized. The optimization results were found to be DNS 33.3%, HRW 33.3%, and SW 33.3% with OP, 5.825; PV, 587.9 cP; DT, 3.1 min; R/E at 45 min, 2.339 BU/mm.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.320-325
• /
• 2009

The effects of adding additives such as vital gluten, gum, emulsifier, and enzyme to rice flour on baking quality were examined. The effects of different gums on the pasting and dough properties of rice flour containing vital gluten were studied using a Rapid Visco Analyzer (RVA) and a Brabender farinograph. The RVA peak, breakdown, and final viscosities decreased with the addition of gums, while setback viscosity increased. The farinogram showed that rice flour supplemented with gums such as tara gum, guar gum, and locust bean gum (LBG) increased water absorption and dough stability, yielding strengthened dough similar to wheat flour dough. The addition of guar or tara gum/sodium stearoyl lactylate (SSL)/fungal $\alpha$-amylase (AMYL) or glucose oxidase (GO) blend improved the volume and reduced the crumb firmness of rice bread prepared from rice flour containing 14% vital gluten. Therefore, the combined addition of gum, emulsifier and enzyme into rice flour significantly improved the rice bread quality, allowing the decrease of the vital gluten level in rice bread formula.

• The Korean Journal of Community Living Science
• /
• v.20 no.4
• /
• pp.493-502
• /
• 2009

The purpose of this study was to investigate the properties of baguettes containing buckwheat flour. Physical properties of the bread flour mixed with buckwheat flour were tested by rapid visco analyzer(RVA), farinogram, and alveogram. Water activity of baguettes were measured and their properties were tested by rheometer. As the amount of buckwheat flour increased the peak viscosity and the holding strength were decreased, but the set back value was increased. Therefore, buckwheat flour prevented the gelatinization process. As the amount of buckwheat flour increased, the consistency and water absorption were increased, but development and stability were lower than the control. The bread flour containing high amount of buckwheat flour resulted in less breakdown and low farinogram quality number. As the amount of buckwheat flour was increased, Pmax, L, G, and W values were decreased on alveogram. The water activity and the springness of all samples were decreased during the storage, but the hardness was increased, especially after two days of storage. The sensory properties of baguette containing 10% buckwheat flour had the best scores.

• Korean Journal of Food Science and Technology
• /
• v.42 no.3
• /
• pp.292-297
• /
• 2010

This study was conducted to determine and compare hardness, thermal properties (by DSC), pasting properties (by RVA) and texture of brown rice and white rice, either lodged or non-lodged, with respect to lodging time. The hardness and the thermal properties of lodged brown rice and white rice decreased with lodging time, while those of nonlodged brown and white rice increased. In addition, the rice kernel hardness and the thermal properties had high correlation coefficients. The pasting properties, with the exception of setback, and the textural properties of lodged brown and white rice decreased with lodging time, while those of non-lodged brown and white rice increased.

• Food Engineering Progress
• /
• v.15 no.4
• /
• pp.382-387
• /
• 2011

Physicohemical properties of dual-modified rice starches, cross-linked (with $POCl_{3}$) and hydroxypropylated (with propylene oxide) rice starches, were studied. Rice starch was cross-linked using $POCl_{3}$ (0.005%, 0.02% (v/w)) at 45$^{\circ}C$ for 2 hr and then hydroxypropylated using propylene oxide (2%, 6%, 12% (v/w)) at 45$^{\circ}C$ for 24 hr, respectively. Swelling power, solubility, thermal properties (DSC) and pasting properties (RVA) of cross-linked and hydroxypropylated (CLHP) rice starches were determined. Swelling power of CLHP rice starch increased at relatively lower temperature than native rice starch. Solubility of CLHP rice starch was lower than that of native rice starch. Peak viscosity of CLHP rice starch was lower than that of native starch while holding strength and final viscosity were increased with modification. Breakdown value was lower and setback value was higher than native rice starch. DSC thermal transitions of CLHP rice starch shifted toward lower temperature. Amylopectin-melting enthalpy of CLHP rice starch decreased, whereas it was not affected by the amount of $POCl_{3}$.

• Korean journal of food and cookery science
• /
• v.16 no.5
• /
• pp.431-436
• /
• 2000

Gelatinization properties of potato starches which were prepared by steeping at 10 ${\pm}$ 1$^{\circ}C$ or 25 ${\pm}$ 1$^{\circ}C$ for 11 days were investigated. The pasting and initial gelatinization temperatures measured by rapid visco-analyzer (RVA) were increased, but the peak and trough viscosities of potato starch were decreased by steeping. The onset temperature, peak temperature, conclusion temperature, and enthalpy of gelatinization were increased by steeping as measured by DSC. The contents of hot-water-soluble carbohydrate and amylose in potato starch were decreased by steeping.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.2
• /
• pp.171-176
• /
• 2004

The purpose of this study was to examine physical properties of the bread flour added two different commercial sour dough powder. Addition of sour dough powder didn't show different water absorption, but reduce stability and increase breakdown on farinogram. Initial pasting temperatures of bread flour were increased by 0.7-1.3$^{\circ}C$ when sour dough powder was added. Peak viscosity were increased by 3-6 RVA with addition of Phil IM 1, but addition of Phil XN 290 didn't show much difference with unadded bread flour Hardness of bread added Phil XN 290 and Phil IM 1 were lower than control after 2 days of making bread, but after 4 days they showed rapid increment. Sensory test showed that addition of Phil XN 290 2％ and Phil IM 1％ had better general evaluation than the others.

• Culinary science and hospitality research
• /
• v.13 no.3
• /
• pp.158-165
• /
• 2007

This study was carried out to evaluate the rheological properties of cake flour with 3% of commercial multi-emulsifiers(P company, W company, O company) based on flour. Rheological properties were analyzed by Falling number, RVA, Alveograph and Farinograph. In Falling number, viscosity of cake flour with multi-emulsifiers was increased. In RVA, initial pasting temperature was increased by adding multi-emulsifier except for W company. and peak viscosity, final viscosity and setback were increased but breakdown was decreased. In Alveogram, P and P/L value were decreased but L and G value were increased. In Farinogram, water absorption was decreased but dough development time was increased and stability was increased except for P company.