• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2021

Due to rapidly increasing air traffic congestion and airspace restrictions, the International Civil Aviation Organization (ICAO) is urging all aircraft to use SBAS by 2025, in order to implement Performance-based navigation to increase airspace capacity. In line with this, research and development of Korean-style SBAS, which reflects the characteristics of Korea's airspace environment, continues in Korea. Since there is no flight inspection procedure for performance testing and verification of SBAS in Korea yet, this paper analyzes FAA, ICAO Regulations, and laws enacted by the Ministry of Land, Infrastructure and Transport to derive essential evaluations and parameters of Korean SBAS, and presents the optimal design using RTK-DGPS as a position fixing system.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.7-17
• /
• 2004

지금까지의 링크통행시간에 대한 연구는 개별 차량의 평균을 통한 평균링크통행시간 산정 및 추정의 제한적인 연구가 대부분이었다. 그러나, 링크통행시간은 교통조건, 신호운영조건, 도로조건 등 다양한 영향인자로 인해 통행시간 분포가 구분되는 특성을 나타낸다. 따라서, 링크통행시간 특성을 좀 더 미시적으로 분석할 필요가 있다. 본 연구에서는 GPS를 이용한 실시간 교통자료 수집의 방법에 대해 살펴보았으며, GPS를 이용한 RTK 측량을 이용한 실시간 자료수집을 통하여 링크통행시간에 대한 연구를 수행하였다. 또한, 신호운영에 의한 영향으로 인한 링크통행시간 분포특성을 분석하기 위해 링크통행시간에 대한 현장조사를 추가적으로 실시하였다. 현장조사 결과분석을 통해 통행시간 분포특성 및 원인을 분석하고 프로그램을 이용한 시뮬레이션을 통해 보다 다양한 조건을 부여하여 링크통행시간분포비율에 영향을 주는 변수들에 대한 검토하고 통행시간 분포비율을 추정할 수 있는 모형을 구축하였다. GPS 실험차량을 이용한 주행실험결과를 분석한 결과 순행시간으로만 이루어지는 링크통행시간과 적색시간 동안 대기하였다가 링크구간을 통과하여 순행시간에 신호 대기시간을 더한 링크통행시간으로 통행시간이 구분되는 현상을 확인할 수 있었으며 따라서, 링크통행시간에 대한 분석은 통행시간을 하나의 평균통행시간으로 인식하는 것보다 두 개의 구분된 통행시간을 동시에 고려하는 것이 바람직할 것으로 판단되었다. 링크통행시간 분포특성에 대한 연구결과 또한, 통행시간이 양분되어 분포하는 것으로 분석되었다. 따라서, 링크통행시간의 경우 평균통행시간에 의한 결과보다 신호지체가 발생하지 않는 통행시간과 신호지체가 발생하는 통행시간으로 구분하는 것이 교통상황을 인식하는 것이 바람직할 것으로 나타났다.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.323-336
• /
• 2015

Estimating the risks on the roadway using surrogate safety measures (SSM) has an advantage in that it focuses on the vehicle trajectory directly involved in conflicts. On the other hand, there is a restriction on estimating the risks of continuous segments due to the limited data collected from a location. To overcome the restriction, this study presents the scheme of acquiring the vehicular trajectory using real time kinematics-differential global positioning system (RTK-DGPS) and develops a methodology which contains the considerations of the problems to calculate the SSM such as time-to-collision (TTC), deceleration rate to avoid collision (DRAC) and acceleration noise (AN). By using the methodology, this study shows a result from an experiment executed in a section where the variation of vehicular movement can be observed from several continuous flow roadway sections near Seoul and Gyeonggi Province in Korea. The result illustrated the risks on the roadway by the SSM metrics in certain situations like merging and diverging, stop-and-go, and weaving. This study would be applied to relate the dangers with characteristics of drivers and roadway sections, and prevenst accidents or conflicts by detecting dangerous roadway sections and drivers' behaviors. This study contributes to improving roadway safety and reducing car-accidents.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.1
• /
• pp.58-66
• /
• 2010

In this paper, we have constructed high-resolution topographical map of macro-tidal Malipo beach through integration of terrestrial LiDAR measurement and MBES survey data at inter-tidal zone. To acquire the enough information of inter-tidal zone, we have done terrestrial LiDAR measurement mounted on the roof of vehicle with DGPS through go-stop-scan method at the ebb tide and MBES depth surveying with tide gauge and eye staff measurement for tide correction and MSL calculation at the high tide all together. To integrate two kinds of data, we have unified the vertical coordination standard to Incheon MSL. The mean error of overlapped inter-tidal zone is about 2~6 cm. To verify the accuracy of terrestrial LiDAR, RTK-DGPS measurement have done simultaneously and the difference of Z value RMSE is about 4~7 cm. The resolution of Malipo topographical map is 50 cm and it has constructed to DEM (Digital Elevation Model) based on GIS. Now it has used as an input topography information for the storm-surge inundation prediction models. Also it will be possible to use monitoring of beach process through the long-term periodic measurement and GIS-based 3D spatial analysis calculating the erosion and deposition considering with the artificial beach transition and coastal environmental parameters.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.677-685
• /
• 2011

In order to enhance public transportation and to maintain information credibility, improvement of accuracy regarding route and positional information of public transport is very significant. There have been a variety of methods using GPS to measure accuracy of location-based services. However, the researches of evaluation regarding kinematic position of linear objects measured by vehicle/kinematic GPS are still insufficient. That's why our paper aims to suggest method of evaluation accuracy on a real-time bus route surveyed by GPS by SBM(Single Buffering Method). To make it come true, we compared the findings on the static and dynamic positioning by using PP(Point Positioning), DGPS and GPS/INS integrated systems and analyzed the accuracy and error effects among them, focusing on Anyang city. Consequently, we can find out that in case of P.P. comparing positioning accuracy between RTK DGPS and GPS/INS, both of them have survey result within a margin of error of 5m. More importantly, we can evaluate positional accuracy of each GPS system based on the work provision of a public survey such as error for P.P.(14.5m, 18.1m), DGPS(16.9m, 18.5m), and GPS/INS(18.4m, 18.5m). We are expecting that proposed method in our paper can be utilized in a wide range of categories such as feasibility testing of GPS field survey and high accuracy of positioning for Bus Information System.

• Spatial Information Research
• /
• v.15 no.2
• /
• pp.111-121
• /
• 2007

The GPS positioning offer 3D position using code and carrier phase measurements, but the user can obtain the precise accuracy positioning using carrier phase in Real Time Kinematic(RTK). The main problem, which RTK have to overcome, is the necessary to have a reference station(RS) when using RTK should be generally no more than 10km on average, which is significantly different from DGPS, where distances to RS can exceed several hundred kilometers. The accuracy of today's RTK is limited by the distance dependent errors from orbit, ionosphere and troposphere as well as station dependent influences like multipath and antenna phase center variations. For these reasons, the author proposes Network based GPS Carrier Phase Differential Positioning using Multiple RS which is detached from user receiver about 30km. An important part of the proposed system is algorithm and software development, named DAUNet. The main process is corrections computation, corrections interpolation and searching for the integer ambiguity. Corrections computation of satellite by satellite and epoch by epoch at each reference station are calculated by a Functional model and Stochastic model based on a linear combination algorithm and corrections interpolation at user receiver are used by area correction parameters. As results, the users can obtain the cm-level positioning.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.525-528
• /
• 2006

South Korea has about 80 permanent GPS stations, being used for a variety of applications such as DGPS, RTK, survey and geodesy. Some of them are installed in or near the coastal area for the purpose of maritime navigation. But, until recently, none of them are used for tide gauge benchmark monitoring. In order to monitor the absolute sea level changes, it is necessary to monitor the land uplift or subsidence occurring at tide gauge sites. It is a common practice to use GPS stations installed at tide gauges to determine absolute sea level. This collaborative efforts coordinated by IGS are called TIGA Pilot Project. Many countries including U.S., Canada, European Union nations, Australia and Japan are participating in TIGA, but South Korea is not a member yet. Recently, we established continuously operating GPS stations at tide gauges located in Incheon and Jeju to monitor the movement of tide gauges sites. This paper will introduce goals and progress of the efforts.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1015-1017
• /
• 2003

Recently, DGPS or RTK-GPS techniques enable us to use satellite based positioning systems with high accuracy. But in urban area, navigation systems suffer from problems such as signal blockage by high-rise buildings, multi-path problems, and so on. So we have to know numbers of visible satellites and quality of signals received at the ground level in urban area as accurate as possible. In this paper, we developed a simulation system called LoQAS [Location service Quality Assessment System, 2002, the University of Tokyo] which can simulate numbers of visible satellites and DOP values using accurate satellite orbital data and 3-D digital map. In this time, we evaluated this system and extended it to deal with reflected signals to assess multi-path problems.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.23-34
• /
• 2003

Currently, the efficiency of GPS has been increased in the various precise survey like as the control survey and the navigation etc. Also, it is widely used in the deformation analysis of the structure, the measurement of the marine tides, the measurement of the river level and the topographic monitoring of seabed or riverbed by combined the measurement equipment for depth. In this study, we intend to increase in efficiency of the topographic monitoring of seabed or riverbed by combined with DGPS, RTK GPS and echo sounder. For this study, we defined the error correction of the echo sounder with the experiment of water tank which is considered the characteristic of estuary riverbed and then we developed the s/w for 3-dimensional monitoring of estuary riverbed and applied the s/w to field test and improved the various problems. On analyzing topography of estuary riverbed by combined GPS with echo sounder, the draught error which is yielded to change of length from the water surface by the movement of survey vessel to the end of the transducer was eliminated by geometrical rearrangement and we defined the correction formula $z=BM+SAH-DBR_{(i)}-DRT-ED$. The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter ind residual error and we defined correction formula, $Y=0.00474{\ast}ln(X)-0.0045$ by the regression analysis. and then we verified applicability of correction formula.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.5
• /
• pp.1055-1062
• /
• 2015

A GPS based wave height meter system is proposed in this paper. The proposed system uses a dual-frequency measurements, a precise GPS satellite information and a PPP-based navigation algorithm to estimate the position with high accuracy. This method does not need to receive corrections from the reference stations. Therefore, unlike RTK based wave meter, regardless of the distance to the reference stations, it is possible to estimate position with high accuracy. This system is very simple and accurate system, but accelerometer-based system requires the other sensors such as GPS. Because position error is accumulated in the accelerometer system and must be removed periodically for high accuracy. In order to get the measurements and test the proposed wave height meter system, a buoy equipped with the test platform is installed on the sea near by Jukbyeon habor in Uljin, Korea. Then, to evaluate the performance, compares built-in commercial wave height meter with proposed system.