• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.4
• /
• pp.49-57
• /
• 2008

The cemetery areas which are occupied more than 1.0 percent of whole land of Korea have widened gradually but the reconnaissance is not being conducted for the cemetery investigation due to deficiencies for budget and manpower of the government. The aim of this study is to find a method to establish the lower cost GIS-based cemetery management system by using hand-held DGPS receiver and Mobile GIS software system for easy cemetery management. The results were evaluated and compared to the RTK GPS method. Since the Cemetery Management System shows every tomb's position on the high resolution satellite imagery with a cadastral data, the map helps to find the interesting places easily. Therefore the system data can be used for various purposes such as planning for land development, dealing with real estate as well as cemetery management.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.10a
• /
• pp.85-86
• /
• 2006

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.197-200
• /
• 2002

The current Inn technique is many problems that is permission of radio station using RF Wireless Modem, that is influence of geographic obstacle using radio wave, that is frequency interference, that is finiteness of frequency resources. In this paper, we are solved many elements, IM replaces RF Wireless Modem, we suggest transmission technique of correction message using mobile phone, we researched Interface Module development which is linkage of DGPS receiver and mobile phone. IM can transmit correction message passing RS-232 port and modem communication control. IM of base station is initialized RS-232 port and modem to move station for correction message transmission, IM waited response mode. IM of move station is initialized RS-232 port and modem, IM requests hand shaking to base station, completed connection establishment. Users are worked Differential surveying using receiving correction message between mobile phones.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.208-214
• /
• 2014

Vehicle dynamic states used in various advanced driving safety systems are influenced by road geometry. Among the road geometry information, the vehicle pitch angle influenced by road slope and acceleration-deceleration is essential parameter used in pose estimation including the navigation system, advanced adaptive cruise control and others on sag road. Although the road slope data is essential parameter, the method measuring the parameter is not commercialized. The digital map including the road geometry data and high-precision DGPS system such as DGPS(Differential Global Positioning System) based RTK(Real-Time Kinematics) are used unusually. In this paper, low-cost cascade extended Kalman filter(CEKF) based road slope estimation method is proposed. It use cascade two EKFs. The EKFs use several measured vehicle states such as yaw rate, longitudinal acceleration, lateral acceleration and wheel speed of the rear tires and 3 D.O.F(Degree Of Freedom) vehicle dynamics model. The performance of proposed estimation algorithm is evaluated by simulation based on Carsim dynamics tool and T-car based experiment.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.54-58
• /
• 2013

In recent days, vehicles have become equipped with electric systems that assist and help drivers driving safe by reducing possible accidents. LDWS(Lane Departure Warning System) and LKAS(Lane Keeping Assistant System) are involved in assist systems, especially for lateral motion of vehicles. Sudden and inattentive lateral motion of vehicles due to drivers' fatigue, illness, inattention, and drowsiness are major causes of accidents in highway. LDWS and LKAS provide drivers with warnings or assisting power to reduce any possibilities of accidents. In order to prevent or minimize the possibilities of accidents, lateral motion control of vehicles has been introduced in this research. DGPS/RTK(Differential Global Positioning System/Real Time Kinematics) and GIS(Geographic Information System) have been used to obtain the current position of vehicles and decide when activate controlling lateral motion of vehicles. The presented lateral motion control has been validated with actual vehicle tests.

• Korean Journal of Remote Sensing
• /
• v.17 no.3
• /
• pp.243-251
• /
• 2001

GPS is one of today's most widely used surveying techniques. But, users can't acquire an enough accuracy in applications of the navigation or geodesy by the GPS positioning technique because of the effects of the ionosphere and troposphere. The solution of these restrictions in the DGPS technique that is to eliminate the common errors and can achieve a high accuracy. Although of sufficient density for good DGPS, accuracy of positioning is just not dense enough to provide complete coverage for real-time positioning, because distances between base and rover is short. In this paper, we suggest Realtime Long-Distance Transmission Method of DGPS Error Correction Signal, which consist of TCP, UDP and IP, which allows a user to increase the distance at which the rover receiver is located from the base, due to radio modem.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.52-60
• /
• 2010

It is generally important to get a precise position information for autonomous unmanned vehicle(AUV) to run safely. For getting the position of AUV, the GPS has been using to navigation in a vehicle. Though it is useful to finding a position, it is difficult to precisely control a trajectory of the AUV due to large measuring error which may reach over 10 meters. Therefore to apply AUV it needs to compensate for the error. This paper proposes a method to more precisely localize AUV using three low-cost differential global positioning systems (DGPS). The distance errors between each DGPS are minimized as using the least square method (LSM) and the Kalman filter to eliminate a Gaussian white noise. The selected DGPS is cheaper and easier to set up than the RTK-GPS. It is also more precise than the general GPS. The proposed method can compensate the relatively position error according to stationary and moving distance of the AUV. For evaluating the algorithm by simulation, the DGPS signal with the Gaussian white noise to any points is generated by the AR model and compared with the measurement signal. It is confirmed that the proposed method can effectively compensate the position error as comparing with the measurement signal. The compensated position signal can be used to localize and control the AUV in the road.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.8-14
• /
• 2013

As GNSS(Global Navigation Satellite System) is used in various filed, many countries establish GNSS system independently. But GNSS system has the limitation of accuracy and stability in stand-alone mode, because this system has error elements which are ionospheric delay, tropospheric delay, orbit ephemeris error, satellite clock error, and etc. For overcome of accuracy limitation, the DGPS(Differential GPS) and RTK(Real-Time Kinematic) systems are proposed. These systems perform relative positioning using the reference and user receivers. ETRI(Electronics and Telecommunications Research Institute) is developing precision navigation system in point of extension of GNSS usage. The precision navigation system is for providing the precision navigation solution to common users. If this technology is developed, GNSS system can be used in the fields which require precision positioning and control. In this paper, we introduce the precision navigation system and perform design and algorithm verification.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.1
• /
• pp.41-49
• /
• 2000

This study was performed to establish PC-based Urban Infrastructure Information System(UIIS) using GPS and TotalStation as an alternative to UNIX-based UIIS. After carryig out this study, the following conclusions were derived: PC-based UIIS costs less time and money than UNIX-based UIIS. The coordinates of the control point of the site were obtained using DGPS, then based on this point, locational data were obtained using RTK GPS and TotalStation in the site with realtime data capture to enhance the accuracy of locational data. And image data were also entered into database together with the text data. So, the multimedia database is possible in UIIS.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.319-327
• /
• 2016

Purpose: Automated guidance systems (AGSs) for mobile farm machinery have several advantages over manual operation in the crop production industry. Many researchers and companies have tried to develop such a system. However, it is not easy to evaluate the performance of an AGS because there is no established device used to evaluate it that complies with the ISO 12188 standard. The objective of this study was to develop a tracking sensor system using five laser distance measurement sensors. Methods: One sensor-for long-range distance measurement-was used to measure travel distance and velocity. The other four sensors-for mid-range distance measurement-were used to measure lateral deviation. Stationary, manual driving, and A-B line tests were conducted, and the results were compared with the real-time kinematic differential global positioning system (RTK-DGPS) signal used by the AGS. Results: For the stationary test, the average error of the tracking sensor system was 1.99 mm, and the average error of the RTK-DGPS was 15.19 mm. For the two types of driving tests, the data trends were similar. A comparison of the changes in lateral deviation showed that the data stability of the developed tracking system was better. Conclusions: Although the tracking system was not capable of measuring long travel distances under strong sunlight illumination because of the long-range sensor's limitations, this dilemma could be overcome using a higher-performance sensor.