• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.352-353
• /
• 2008

국제표준화기구(ISO)에서는 장비에 대한 표준화작업을 ISO/TC172에서 관리하고 있으며 산하의 전문위원회인 SC6에 속해있는 ISO17123 $1{\sim}8$은 주로 측량장비의 정밀도를 참조할 때 인용되는 표준으로 그중에서 ISO17123-8: GNSS field measurement systems in real-time kinematic(RTK)은 GNSS의 RTK 정확도평가방법으로서 약식시험절차와 엄밀시험절차를 규정하고 있다. 본 연구에서는 ISO17123-8의 규격을 분석하고 이 규격에 따라 GPS RTK Test-bed를 시험구축하고 정확도 평가방법에 따라 관측값 Testing하는데 목적이 있다.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.263-275
• /
• 2001

With increasing of utilization of 1/1,000 Digital-Map being constructed with NGIS project, it is entering upon the stage that problem as the inspection of position accuracy of Digital-Map before its use. This paper evaluated position accuracy of Digital-Map being based on the construction of college facility management system into small area and presented modification/renovation of Digital-Map on area being occurred position error. With a view to evaluation of position error to building using RTK survey, position error was shown more than 0.5mm that is prescribed in survey-law. In order to acquire good position accuracy, first we carried out Static survey to college and selected control point. And, we evaluated coordinate value to important building from control point and compared these results with RTK survey results. Second, we carried out Affine transform based on the control point of building being surveyed with RTK, transformed pre-constructed Digital-Map and compared these results with RTK Survey results. We analyzed first and second method and presented improvement method of position accuracy of Digital-Map suited on small area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.200-209
• /
• 2022

Providing real-time location information is emerging as a major goal of the national industry. In order to provide such real-time location information (3D spatial information), it is essential to develop a technology for a satellite positioning method. Therefore, the country continues to make efforts to increase satisfaction with the needs of consumers by introducing the Network RTK GNSS method. In this study, among the Network RKT GNSS(Global Navigation Satellite System) methods provided by the National Geographic Information Service, continuous observation and single observation were measured at the integrated reference point using VRS(Virtual Reference Station) and FKP(Flӓachen-Korrektur Parameter) to evaluate accuracy. In addition, we aim to maximize efficiency by presenting accuracy on the rapidly increasing Network RTK GNSS method in the field.

• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.619-626
• /
• 2012

One-way Network-RTK(Real Time Kinematics) is considered as a method which can satisfy moving vehicle's recently-required high accuracy and mobility. When we use one-way Network RTK for vehicle navigation, multiple cells-based system is required to provide the service continuously in wide area. The rover which moves through various cells inevitably experiences a correction discontinuity, which is not eliminated by the DD(Double Difference) method and to cause 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other cells, and ambiguity adjustment between neighbor cells. All of our suggestions reduce the error to 1/4 wavelength in measurement and 3cm in position-domain, and we suggest the ambiguity adjustment is the best when we consider the extendibility of service area and the cost of rover device.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.117-123
• /
• 2013

The purpose of this research is to suggest the reasonable method of Network RTK surveying in future cadastral re-survey project through the accuracy analysis about Network RTK surveying achievement and the conventional TS-based confirmation surveying. To achieve it, we selected the experiment places and succeeded in achieving the result by Network RTK surveying about total of 307 parcel boundary point. We compared it with the result of confirmation surveying for cadastral, and it was shown that total connection errors of RMSE was ${\pm}0.1028m$ and total 48 places exceeded in the cadastral re-survey allowable error tolerance. The research suggested the practical alternatives in cadastral re-survey project after the comprehensive evaluation of those analysis results. Therefore, the author suggested development and adoptation of integrated electronic plane table surveying method. Moreover, we suggested unifying the first parcel boundary point method into the total station surveying and adopt the Network RTK surveying on the cadastral surveying inspection.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.333-342
• /
• 2022

This paper has theoretically and practically reviewed the ISO (International Standard Organization) 17123-8 standard not only to raise the appropriateness for introducing performance criteria of GNSS (Global Navigation Satellite Systems) surveying equipment based on RTK (Real-Time Kinematic) accuracy but also to derive its proper test procedure by introducing the international standard. Field experiments have been performed to appreciate the GNSS-RTK accuracy of five selected receivers via the full testing procedure of the ISO standard, which statistically compares the so-called experimental standard deviations with themselves and with the reference accuracy. A series of statistical tests have revealed that the RTK accuracy of the same class receivers is not identical, whereas that of the different classes can be equivalent. Such a result evidences the urgency of adopting an RTK accuracy-based specification of the GNSS equipment to the performance standard, currently referenced to the static observation technique only. It is believed that this transition helps the maximization of a new generation of cost-effective receivers to legal surveying applications. Finally, this study proposes the ISO full test, comparing an experimental standard deviation with its referenced value, for a potential field verification procedure of the new performance standard.

• Korean Journal of Remote Sensing
• /
• v.18 no.6
• /
• pp.345-358
• /
• 2002

DGPS(Differential Global Positioning System) and RTK(Real time Kinematic) are in one of today's most widely used surveying techniques. However surveying with these techniques is restricted by the distance between reference and rover station, and it is difficult to process data in realtime by their own organizational limitation in precise measurement of positioning. To meet these new demands, in this paper, new DGPS and RTK correction data services through the Internet and PSTN(Public Switched Telephony Network) have been proposed. For this purpose, a DGPS and RTK error correction data transmission system is implemented for long-distance using the Internet and PSTN which allows a mobile user at which the rover receiver is located to receive the correction data from the reference in realtime, and analyzed and compared with DGPS and RTK performances by experiments through the Internet and PSTN for the distance and the time.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.152-155
• /
• 2010

본 연구에서는 서울특별시 네트워크 RTK 시스템의 활용 및 Virtual RINEX 실용성 검토를 위해 수행하였다. 네트워크 RTK 시스템의 활용 다양화를 위해서는 NTRIP을 통하여 타기관의 사용자 시스템으로 실시간 전송, 시설물의 변위에 대한 GNSS로 모니터링 방법, GNSS Internet Radio Client와 Radio Modem을 이용한 RTK측위를 소개하고, Virtual RINEX 실용성 검토는 VRS RTK 측위 결과와 이동국 측위 지점에 대한 Virtual RINEX 데이터의 후처리 성과를 비교하였다. 그 결과, Virtual RINEX와 GPS 관측 성과는 거의 동일하여 향후 Virtual RINEX도 후처리 데이터로 사용할 수 있는 가능성을 확인하였고, VRS RTK 측위 성과는 Virtual RINEX 후처리 성과와 수 mm 이내 차이를 보여 산출된 성과가 거의 같음을 확인할 수 있었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.78-79
• /
• 2012

To improve moving vehicles' accuracy, one-way Network RTK which guarantees high accuracy and integrity regardless the distance from rovers to Reference Station(RS) is being considered. Correction of one-way Network RTK can be generated only after constructing RS network surrounding the rover, therefore a correction discontinuity is inevitably occurred when the RS set has been changed. The discontinuity is not eliminated by the DD(Double Difference) method, and our simulation shows that it causes 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other network, and ambiguity levelling between neighbor networks.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.119-126
• /
• 2011

During precise survey on the top of High rise buildings and civil structures, optical surveying equipments like a Total Station are not recommended to use because of some reasons that uneasier alignment with reflectors located at the top of building, increasing error depends on increasement of observation distance and unavailable dynamic positioning etc. Recently various GPS positioning methods have been applied to this job however almost of them are post-processing method which is required much longer time during for whole process includes stake-out, cross checking, fixing positions and final inspections. Therefore, in this study, we applied with RTK surveying system which allows stake-out and inspection in realtime to avoid delaying of construction schedule and also applied with Quasi Static RTK measurement and network adjustment to get a high accuracy within a few millimeters in structure positioning to achieve a successful management for process and quality control of the project. As a result, very high accurate surveying for structures within approx. 2mm in realtime has been achieved when surveyor conduct a network adjustment using least square method for 4 base lines created by Quasi Static RTK data and we expect this method will be applied to construction survey for high rise buildings and civil structures in the future.