• Applied Science and Convergence Technology
• /
• v.24 no.3
• /
• pp.72-76
• /
• 2015

Nickel oxide (NiO) thin films were grown on soda-lime glass substrates by RF magnetron sputtering method at room temperature (RT), and they were post-annealed at the temperatures of $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$ and $400^{\circ}C$ for 30 minutes in vacuum. The electronic structure, optical and electrical properties of NiO thin films were investigated using X-ray photoelectron spectroscopy (XPS), reflection electron energy spectroscopy (REELS), UV-spectrometer and Hall Effect measurements, respectively. XPS results showed that the NiO thin films grown at RT and post annealed at temperatures below $300^{\circ}C$ had the NiO phase, but, at $400^{\circ}C$, the nickel metal phase became dominant. The band gaps of NiO thin films post annealed at temperatures below $300^{\circ}C$ were about 3.7 eV, but that at $400^{\circ}C$ should not be measured clearly because of the dominance of Ni metal phase. The NiO thin films post-annealed at temperatures below $300^{\circ}C$ showed p-type conductivity with low electrical resistivity and high optical transmittance of 80% in the visible light region, but that post-annealed at $400^{\circ}C$ showed n-type semiconductor properties, and the average transmittance in the visible light region was less than 42%. Our results demonstrate that the post-annealing plays a crucial role in enhancing the electrical and optical properties of NiO thin films.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2231-2236
• /
• 2005

CP (Cellular Phone) is currently one of the most attractive technologies and RT (Robot Technology) is also considered as one of the most promising next generation technology. We present a new technological concept named RCP (Robotic Cellular Phone), which combines RT and CP. RCP consists of 3 sub-modules, $RCP^{Mobility}$, $RCP^{Interaction}$, and $RCP^{Integration}$. $RCP^{Interaction}$ is the main focus of this paper. It is an interactive emotion system which provides CP with multi-emotional signal receiving functionalities. $RCP^{Interaction}$ is linked with communication functions of CP in order to interface between CP and user through a variety of emotional models. It is divided into a tactile, an olfactory and a visual mode. The tactile signal receiving module is designed by patterns and beat frequencies which are made by mechanical-vibration conversion of the musical melody, rhythm and harmony. The olfactory signal receiving module is designed by switching control of perfume-injection nozzles which are able to give the signal receiving to the CP-called user through a special kind of smell according to the CP-calling user. The visual signal receiving module is made by motion control of DC-motored wheel-based system which can inform the CP-called user of the signal receiving through a desired motion according to the CP-calling user. In this paper, a prototype system is developed for multi-emotional signal receiving modes of CP. We describe an overall structure of the system and provide experimental results of the functional modules.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.357-365
• /
• 2013

The 4 by 4 series slot sub-array antenna is proposed using substrate integrated waveguide(SIW) technology for 35 GHz of Ka band application. The proposed antenna is realized with multi-layered structure for compact size and easy integration features. 4 by 4 radiating slots are arrayed on top PCB with equal spacing and the feeding SIWs are arranged on middle and bottom PCBs for uniform power distribution. The multi-layered antenna is realized using RT/Duroid 5880 that has dielectric constant of 2.2 and the total antenna size is $750.76mm^2$. The individual parts such as radiators and feeding networks are simulated using full-wave simulator CST MWS. Furthermore, the total sub-array antenna also fabricated and measured the electrical performances such as impedance bandwidth under the criteria of -10 dB(490 MHz), maximum gain(18.02 dBi), sidelobe level(SLL)(-11.0 dB), and cross polarization discrimination (XPD)(-20.16 dB).

• Journal of Gastric Cancer
• /
• v.2 no.4
• /
• pp.213-220
• /
• 2002

Purpose: The cDNA microarray provides a powerful alternative with an unprecedented view in monitoring geneexpression levels and leads to discoveries of regulatory pathways involved in complicated biological processes. Our aim is to explore the different gene-expression patterns in gastric adenocarcinomas. Materials and Methods: By using a cDNA microarray representing 4,600 cDNA clusters, we studied the expression profiling in 10 paired gastric adenocarcinoma samples and in adjacent noncancerous gastric tissues from the same patients. Alterations in the gene-expression levels were confirmed by Vsing Northern blots and reverse-transcription PCR (RT-PCR) in all of 4 randomly selected genes. Results: Genes those were expressed differently in cancer ous and noncancerous tissues were identified. 44 (of which 26 were known) and 92 (of which 43 were known) genes or cDNA were up- and down-regulated, respectively, in more than $80\%$ of the gastric adenocarcinoma samples. In cancer ous tissues, genes related to gene/protein expression, cellcycle regulation, and metabolism were mostly up-regulated whereas genes related to the oncogene/tumor suppressor gene, cell structure/motility, and immunology were mostly down-regulated. The semi-quantitative RT-PCR results for the four genes we tested were consistent with the array findings. Conclusions: These results provide not only a new molecular basis for understanding the biological properties of gastric adenocarcinomas but also a useful resource for future development of therapeutic targets and diagnostic markers for gastric adenocarcinomas.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1673-1682
• /
• 2013

Citrobacter sp. is a cause of significant opportunistic nosocomial infection and is frequently found in human and animal feces, soil, and sewage water, and even in industrial waste or putrefaction. Biofilm formation is an important virulence trait of Citrobacter sp. pathogens but the process and characteristics of this formation are unclear. Therefore, we employed in vitro assays to study the nutritional and environmental parameters that might influence biofilm formation of C. werkmanii BF-6 using 96-well microtiter plates. In addition, we detected the relative transcript levels of biofilm formation genes by RT-PCR. Our results indicated that the capacity of C. werkmanii BF-6 to form biofilms was affected by culture temperature, media, time, pH, and the osmotic agents glucose, sucrose, NaCl, and KCl. Confocal laser scanning microscopy results illustrated that the structure of biofilms and extracellular polysaccharide was influenced by 100 mM NaCl or 100 mM KCl. In addition, nine biofilm formation genes (bsmA, bssR, bssS, csgD, csgE, csgF, mrkA, mrkB, and mrkE) were found to contribute to planktonic and biofilm growth. Our data suggest that biofilm formation by C. werkmanii BF-6 is affected by nutritional and environmental factors, which could pave the way to the prevention and elimination of biofilm formation using proper strategies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.89-89
• /
• 2010

The atomic structure of Sb/Si(5 5 12)-$2{\times}1$ surface, deposited at room temperature (RT) and post-annealed, has been identified by scanning tunneling microscopy and the corresponding interface has been studied by synchrotron core-level photoemission spectroscopy. With 0.3-nm Sb deposition at RT and postannealing at $600^{\circ}C$, the surface has been facetted to (225)-$2{\times}1$ and (112)-$1{\times}1$, and its Si 2p has shown that all the Si 2p surface components have disappeared, while the single Sb-Si interfacial component has appeared. Such results indicate that all of surface Si atoms are replaced by Sb atoms and the charge is transferred from Si to passivating Sb-atoms at the top layer. With subsequent postannealing up to $700^{\circ}C$, the surface has been facetted to (113)-$2{\times}2$ and (335)-$4{\times}2$, still having Sb-Si interfacial component and partially re-exposed Si surface components. From the present study, the role of surfactant atom, Sb, as well as the thermal-stabilization of Sb-passivated high-index Si surface will be exposed. Especially, the key role of the Sb/Si(113)-$2{\times}2$, composed of Rebonded-Dimer-Rebonded atom 1D structures, for stabilization will be discussed.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.4
• /
• pp.237-242
• /
• 2008

A liguleless mutant, which showed complete loss of lamina joint region at the junction between leaf blade and leaf sheath, was isolated from a Ds insertional mutants derived from the source cultivar, Dongjin. This mutant could not affect other developmental patterns like phyllotaxis. Southern blot analysis, using GUS as a probe, revealed that the liguleless mutant contained three Ds copies transposed in the rice genome. Among the four genomic sequences flanking the Ds, one was mapped in the intergenic region (31661640 - 31661759), and the other two predicted a protein kinase domain (12098980 - 12098667) as an original insertion site within a starter line used for massive production of Ds insertional mutant lines. Another predicted and inserted in first exon of liguleless 1 protein (OsLG1) that was mapped in coding region (LOC_Os04g56170) of chromosome 4. RT-PCR revealed that the OsLG1 gene was not expressed liguleless mutants. Structure analysis of OsLG1 protein revealed that it predicted transcription factor with a highly conserved SBP domain consisting of 79 amino acids that overlapped a nuclear localization signal (NLS). RT-PCR revealed that OsLG1 is mainly expressed in vegetative organs.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.2
• /
• pp.73-76
• /
• 2010

The copper indium disulfide ($CuInS_2$) thin film was manufactured using sputtering and thermal evaporation methods, and the annealing with sulfurization process was used in the vacuum chamber to the substrate temperature on the glass substrate, the annealing temperature and the composition ratio, and the characteristics thereof were investigated. The $CuInS_2$ thin film was manufactured by the sulfurization of a soda lime glass (SLG) Cu/In/S stacked [1] elemental layer deposited on a glass substrate by vacuum chamber annealing [2] with sulfurization for various times at a temperature of substrate temperature of $200^{\circ}C$. The structure and electrical properties of the film was measured in order to determine the optimum conditions for the growth of $CuInS_2$ ternary compound semiconductor $CuInS_2$ thin films with a non-stoichiometric composition. The physical properties of the thin film were investigated under various fabrication conditions [3,4], including the substrate temperature, annealing temperature and annealing time by X-ray diffraction (XRD), field Emission scanning electron microscope (FE-SEM), and Hall measurement systems. [5] The sputtering rate depending upon the DC/RF power was controlled so that the composition ratio of Cu versus In might be around 1:1, and the substrate temperature affecting the quality of the film was varied in the range of room temperature (RT) to $300^{\circ}C$ at intervals of $100^{\circ}C$, and the annealing temperature of the thin film was varied RT to $550^{\circ}C$ in intervals of $100^{\circ}C$.

• Genomics & Informatics
• /
• v.3 no.4
• /
• pp.133-141
• /
• 2005

Most of the endogenous retroviral genes integrated into the primate genome after the split of New World monkeys in the Oligocene era, approximately 33 million years ago. Because they can change the structure of adjacent genes and move between and within chromosomes they may play important roles in evolutionas well as in many kinds of disease and the creation of genetic polymorphism. Comparative analysis of HERVs (human endogenous retroviruses) and their LTR (long terminal repeat) elements in the primate genomes will help us to understand the possible impact of HERV elements in the evolution and phylogeny of primates. For example, HERV-K LTR and SINE-R elements have been identified that have been subject to recent change in the course of primate evolution. They are specific elements to the human genome and could be related to biological function. The HERV-M element is related to the superfamily of HERV-K and is integrated into the periphilin gene as the truncated form, 5'LTR-gag-pol-3'LTR. PCR and RT-PCR approaches indicated that the insertion of various retrotransposable elements in a common ancestor genome may make different transcript variants in different primate species. Examination of the HERV-W elementrevealed that env fragments were detected on human chromosomes 1, 3-7, 12, 14, 17, 20, and X, whilst the pol fragments were detected on human chromosomes 2-8, 10-15, 20, 21, X, and Y. Bioinformatic blast search showed that almost full-length of the HERV-W family was identified on human chromosomes 1-8, 11-15, 17, 18, 21, and X. Expression analysis of HERV-W genes (gag, pol, and env) in human tissues by RT-PCR indicated that gag and pol were expressed in specific tissues, whilst env was constituitively expressed in all tissues examined. DNA sequence based phylogenetic analysis indicated that the gag, pol and env genes have evolved independently during primate evolution. It will thus be of considerable interest to expand the current HERV gene information of various primates and disease tissues.

• Macromolecular Research
• /
• v.13 no.4
• /
• pp.285-292
• /
• 2005

We developed alginate beads loaded with transforming growth $factor-{\beta}_{1}(TGF-{\beta}_{1})$ to examine the possible application of the scaffold and cytokine carrier in tissue engineering. In this study, bone marrow stromal cells (BMSCs) and $TGF{\beta}_{1}$ were uniformly encapsulated in the alginate beads and then cultured in vitro. The cell morphology and shape of the alginate beads were observed using inverted microscope, scanning electron microscope (SEM), histological staining and RT-PCR to confirm chondrogenic differentiation. The amount of the $TGF{\beta}_{1}$ released from the $TGF-{\beta}_{1}$ loaded alginate beads was analyzed for 28 days in vitro in a phosphate buffered saline (pH 7.4) at $37^{\circ}C$. We observed the release profile of $TGF-{\beta}_{1}$ from $TGF-{\beta}_{1}$ loaded alginate beads with a sustained release pattern for 35 days. Microscopic observation showed the open cell pore structure and abundant cells with a round morphology in the alginate beads. In addition, histology and RT-PCR results revealed the evidence of chondrogenic differentiation in the beads. In conclusion, these results confirmed that $TGF-{\beta}_{1}$ loaded alginate beads provide excellent conditions for chondrogenic differentiation.