• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1882-1887
• /
• 2003

The response surface method (RSM) became one of famous meta modeling techniques, however its approximation errors give designers several restrictions. Classical RSM uses the least squares method (LSM) to find the best fitting approximation models from the all given data. This paper discusses how to construct RSM efficiently and accurately using moving least squares method (MLSM) with sensitivity information. In this method, several parameters should be determined during the construction of RSM. Parametric study and optimization for these parameters are performed. Several difficulties during approximation processes are described and numerical examples are demonstrated to verify the efficiency of this method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.957-960
• /
• 2006

In order to predict the accumulated damages by cyclic freeze-thaw, a regression analysis by the Response Surface Method (RSM) is used. RSM has merits when the other probabilistic simulation techniques can not guarantee the convergence of probability of occurrence or when the others can not differentiate the derivative terms of limit state functions, which are composed of random design variables in the model of complex system or the system having higher reliability. For composing limit state function, the important parameters for cyclic freeze-thaw-deterioration of concrete structures, such as water to cement ratio, entrained air pores, and the number of cycles of freezing and thawing, are used as input parameters of RSM. The predicted results of relative dynamic modulus and residual strains after 300 cycles of freeze-thaw for specimens show very good agreements with the experimental results. The RSM result can be used to predict the probability of occurrence for designer specified critical values. Therefore, it is possible to evaluate the life cycle management of concrete structures considering the accumulated damages by the cyclic freeze-thaw by the use of proposed prediction method.

• Transactions of Materials Processing
• /
• v.30 no.1
• /
• pp.27-34
• /
• 2021

In this study, response surface method (RSM) was used in modeling and multi-objective optimization of the parameters of AA5052-H32 in incremental sheet forming (ISF). The goals of optimization were the maximum forming angle, minimum thickness reduction, and minimum surface roughness, with varying values in response to changes in production process parameters, such as tool diameter, tool spindle speed, step depth, and tool feed rate. A Box-Behnken experimental design (BBD) was used to develop an RSM model for modeling the variations in the forming angle, thickness reduction, and surface roughness in response to variations in process parameters. Subsequently, the RSM model was used as the fitness function for multi-objective optimization of the ISF process based on experimental design. The results showed that RSM can be effectively used to control the forming angle, thickness reduction, and surface roughness.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.5
• /
• pp.427-436
• /
• 2002

This paper presents an implementation of high-dynamic performance of position sensorless motion control system of Reluctance Synchronous Motor(RSM) drives for an industrial servo system with direct torque control(DTC). The problems of high-dynamic performance and maximum efficiency RSM drives controlled by DTC are saturation of stator linkage flux and nonlinear inductance characteristics with various load currents. The accurate estimation of the stator flux and torque are obtained using stator flux observer of which a saturated inductance $L_d$ and $L_q$ can be compensated by adapting from measurable the modulus of the stator current and rotor position. To obtain fast torque response and maximum torque/current with varying load current, the reference command flux is ensured by imposing $I_{ds} = I_{qs}$. This control strategy is proposed to achieve fast response and optimal efficiency for RSM drive. In order to prove rightness of the suggested control algorithm, the actual experiment carried out at $\pm$20 and $\pm$1500 rpm. The developed digitally high-performance motion control system shown good response characteristic of control results and high performance features using 1.0kW RSM which has 2.57 Ld/Lq salient ratio.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.532-538
• /
• 2020

In this study, emulsification process were conducted to manufacture the natural sunscreen from raw materials such as shea butter, olive emulsifier wax, and green tea extract. The emulsification was optimized by using the central composite design model-response surface methodology (CCD-RSM) where the response values were established as the mean droplet size (MDS) and emulsion stability index (ESI) after 7 days in addition to UV absorbance at 300nm. The amount of emulsifier and additives and emulsification time were established as operating variables and the optimal conditions of sunscreen emulsification were accepted as 3.70, 2.47 wt.%, and 15.42 min, respectively according to the result of CCD-RSM. On the other hand, the response values were estimated as 1173.80 nm and 99.56% for MDS and ESI, respectively, after 7 days, in addition to UV absorbance at 300 nm (2.47). The average error from actual experiments was a low level as about 3.0 ± 1.5%, which is mainly due to the fact that the optimization using CCD-RSM applied in this study was in the relatively high significant level.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.3
• /
• pp.386-394
• /
• 2018

Objective: This experiment evaluated the effect of dietary supplementation levels of rapeseed meal (RSM) in gestation diets on reproductive performance, blood profiles, milk composition of sows, and growth of their progeny. Methods: A total of 55 mixed-parity sows ($Yorkshire{\times}Landrace$; average parity = 3.82) with an initial body weight (BW) of 193.0 kg were used in this experiment. Sows were allotted to one of 5 treatments at breeding based on BW and backfat thickness in a completely randomized design. Treatments consisted of dietary RSM supplementation levels (0%, 3%, 6%, 9%, and 12%) in gestation diets. During lactation all sows were fed a common lactation diet with no RSM supplementation. Results: Body weight, backfat thickness, litter size, lactation feed intake, and milk composition of sows, and growth of their progeny were not different among dietary treatments. In blood profiles, a quadratic increase (Quadratic, p<0.05) in serum triiodothyronine (T3) concentration and a linear increase (Linear, p<0.01) in serum thyroxine (T4) concentration were observed at d 110 of gestation as dietary RSM supplementation levels increased. However, serum T3 and T4 concentrations in lactating sows and their piglets were not affected by RSM supplementation of gestation diets. Concentrations of serum total cholesterol and low density lipoprotein cholesterol in sows were not influenced by dietary treatments, whereas serum glucose level in sows decreased linearly at d 110 of gestation (Linear, p<0.05) by increasing dietary RSM supplementation in gestation diets. Conclusion: The RSM could be supplemented to gestation diets up to 12% with no detrimental effects on reproductive performance and growth of their progeny. However, increasing supplementation levels of RSM in gestation diets may increase serum T3 and T4 concentrations and decrease serum glucose concentration of sows in late gestation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.9
• /
• pp.1381-1388
• /
• 2019

Objective: The aims of this study were to reveal the magnitude of the differences in protein structures at a cellular level as well as protein utilization and availability among soybean meal (SBM), canola meal (CM), and rapeseed meal (RSM) as feedstocks in China. Methods: Experiments were designed to compare the three different types of feedstocks in terms of: i) protein chemical profiles; ii) protein fractions partitioned according to Cornell Net Carbohydrate and Protein System; iii) protein molecular structures and protein second structures; iv) special protein compounds-amino acid (AA); v) total digestible protein and energy values; vi) in situ rumen protein degradability and intestinal digestibility. The protein second structures were measured using FT/IR molecular spectroscopy technique. A summary chemical approach in National Research Council (NRC) model was applied to analyze truly digestible protein. Results: The results showed significant differences in both protein nutritional profiles and protein structure parameters in terms of ${\alpha}-helix$, ${\beta}-sheet$ spectral intensity and their ratio, and amide I, amide II spectral intensity and their ratio among SBM, CM, and RSM. SBM had higher crude protein (CP) and AA content than CM and RSM. For dry matter (DM), SBM, and CM had a higher DM content compared with RSM (p<0.05), whereas no statistical significance was found between SBM and CM (p = 0.28). Effective degradability of CP and DM did not demonstrate significant differences among the three groups (p>0.05). Intestinal digestibility of rumen undegradable protein measured by three-step in vitro method showed that there was significant difference (p = 0.05) among SBM, CM, and RSM, which SBM was the highest and RSM was the lowest with CM in between. NRC modeling results showed that digestible CP content in SBM was significantly higher than that of CM and RSM (p<0.05). Conclusion: This study suggested that SBM and CM contained similar protein value and availability for dairy cattle, while RSM had the lowest protein quality and utilization.

• Applied Chemistry for Engineering
• /
• v.34 no.2
• /
• pp.137-143
• /
• 2023

In this study, natural surfactants were extracted from Medicago sativa L. The O/W emulsification processes with the extracted natural surfactants were optimized using central composite design model-response surface methodology (CCD-RSM) and a 95% confidence interval was used to confirm the reasonableness of the optimization. Herein, independent parameters were the ratio of saponins to total surfactant (P), amount of surfactant (W), and emulsification speed (R), whereas the reaction parameters were the emulsion stability index (ESI), mean droplet size (MDS), and viscosity (V). Using the multiple reaction, the optimal conditions for the ratio of saponins to total surfactant, amount of surfactant, and emulsification speed for O/W emulsification were 49.5%, 9.1 wt%, and 6559.5 rpm, respectively. Under these optimal conditions, the expected values of ESI, MDS, and V as the reaction parameters were 89.9%, 1058.4 nm, and 1522.5 cP, respectively. The values of ESI, MDS, and V from these expected values were 88.7%, 1026.4 nm, and 1486.5 cP, respectively, and the average experimental error for validating the accuracy was about 2.3 (± 0.4)%. Therefore, it was possible to design an optimization process for evaluating the O/W emulsion process with Medicago sativa L. using CCD-RSM.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.208-211
• /
• 1998

A phase winding of RSM is excited and measured the excited winding inductance, mutual inductance. Ld and Lq is calculated from the measurement result. Two rotors are manufactured for this paper, measured their inductance and compared the calculated equation with the conventional equation. This paper confirmed the effectiveness of the proposed method.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2006.04a
• /
• pp.198-202
• /
• 2006