• Journal of Korean Society of Transportation
• /
• v.33 no.3
• /
• pp.315-321
• /
• 2015

ATMS calculates section travel time using two-way communication system called DSRC(Dedicated Short Range Communications) which collects data of RSE (Road Side Equipment) and Hi-pass OBU (On-board Unit). Travel time estimation in urban area involves uncertainty due to the interrupted flow. This study not only analyzed real-time data but also considered pattern data. Baek-Je-Ro street in Jeon-Ju city was selected as a test site. Existing algorithm was utilized for data filtering and pattern data building. Analysis results repoted that travel time estimation with 20% of real-time data and 80% of pattern data mixture gave minimum average difference of 37.5 seconds compare to the real travel time at the 5% significant level. Results of this study recommend usage of intermixture between real time data and pattern data to minimize error for travel time estimation in urban area.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.415-422
• /
• 2019

Human epidermal stem cells(ESCs) residing in the basement membrane of the skin have an important role in maintenance of skin homeostasis of epidermal layer. Although, ESCs provide new cells to repair damaged tissue in response to tissue injury, subsets of stem cells remain in the quiescent state protected from differentiation and senescence for prolonged survivals. In this perspective, the stem cell niche, which is specific microenvironment composed of niche cells and an extracellular matrix(ECM), supplies the relevant signal to save stem cells from microenvironmental damages. The expression of stemness marker on the surface of ESCs contributes to the attachment on their ECM of the basement membrane, which lead to growth potential and apoptotic resistance against environmental stimuli. In this study, we observed that UV irradiation, a major factor of environmental stimuli, reduced the expression of α2, β1 and α6 integrin in ESCs. Rhus Semialata M extract(RSE) showed inhibitory effect on the UVB-induced reduction of integrin expression. Furthermore, RSE could upregulate the expression of Col-IV and Laminin, which contribute to the attachment of ESCs. These results indicated that RSE could be a potent ingredient for the protection of ESCs from UV irradiation by increasing the expression of integrin and substrate ECM components at their niche.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.1-13
• /
• 2011

Recently, a number of OBU(On Board Unit) have being spreaded since ETCS(Electronic Toll Collection System)using DSRC(Dedicated Short Range Communication) was installed in the tollgate of the whole country. Many R&D and commercialization related to ITS service using DSRC and OBU mentioned above are ongoing such as traffic information collection and provision and a signal control, and public traffic information and management and so on. Especially, there are many researches conducted(conducting) on traffic information collection and provision using communication between OBU and RSE. However, Standards for both DSRC application and traffic collection and provision are not established clearly yet. So we would like to suggest a method of traffic information collection and provision without changing of standard related to DSRC. This method is to put the traffic messages into the existing Action primitive for ETC, which is described on "Technical criterion IV of basic traffic information exchange" which was notified by Ministry of Land, Transport and Maritime Affairs. Proposed standard application method is applied both to RSE and OBE. It is the same system which ETCS used in highway, currently. We confirmed the efficiency and performance of the system through conducting a variety of driving test using 4 vehicles in real road condition. Result of the real road test shows the effectiveness and validity of this method with about 97% communication success rate and based on studying the cases of 3% communication failure, we can analyse the expected problems in traffic information collection and provision using this method.

• Journal of Animal Science and Technology
• /
• v.55 no.2
• /
• pp.95-101
• /
• 2013

The present study was conducted to test a hypothesis that pork quality traits would be influenced by the systemic and/or local bioavailability of insulin-like growth factor-I (IGF-I), transforming growth factor-${\beta}1$ (TGF-${\beta}1$), or epidermal growth factor (EGF) before or at slaughter. To this end, 60 cross-bred female market pigs weighing approximately 110 kg were slaughtered, after which Longissimus dorsi muscle (LM) samples taken at slaughter (D 0) and blood samples taken at D -7 and D 0 were analyzed. The 60 carcasses rendered 36 RFN (reddish-pink, firm, and non-exudative), 16 RSE (reddish-pink, soft, and exudative), and 6 PSE (pale, soft, and exudative); 2 DFD (dark, firm, and dry) also were found but were excluded in subsequent experiments. The $L^*$ and drip loss were greater in PSE vs. RFN and RSE and in PSE and RSE vs. RFN, respectively, as they should (P<0.05). The $pH_{45min}$ was less in PSE vs. RFN (P<0.05); $pH_{24h}$ tended to be less in the former (P=0.09). The LM IGF-I and TGF-${\beta}1$ as well as serum EGF concentrations were less in PSE than in RFN. None of the other LM and serum concentrations of the three growth factors differed across the three pork quality categories. The LM IGF-I and TGF-${\beta}1$ concentrations and serum EGF concentration at D 0 were negatively correlated with drip loss [r = -0.36(P<0.01), -0.44 (P<0.01), and -0.32 (P<0.05), respectively]. However, none of the serum and LM growth factor variables was correlated with $L^*$ or $a^*$ (redness) of LM. Taken together, results suggest that locally expressed IGF-I and TGF-${\beta}1$ and blood-borne EGF may have a beneficial effect on postmortem water holding capacity of the muscle and that pork quality traits could be predicted to some extent from concentrations of IGF-I and TGF-${\beta}1$ in muscle and EGF in serum at slaughter.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.470-474
• /
• 1998

In this paper, to estimate the time-varying parameters of speech signal, we use the robust sequential estimator based on t-distribution and, for time-varying signal, introduce the forgetting factor. By using the RSE based on t-distribution with small degree of freedom, we can alleviate efficiently the effects of outliers to obtain the better performance of parameter estimation. Moreover, by the forgetting factor, the proposed algorithm can estimate the accurate parameters under the rapid variation of speech signal.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2244-2247
• /
• 2003

In this paper, we present a method which can minimize distortion from desired signal in thoracic sound signal processing. We firstly chose the proper wavelet mother function to reduce noise components. Secondly, we chose a clean thoracic sound, then added Gaussian noise and 3 step(10, 15, 20db) uniform noise to it. Finally, the various wavelet functions are applied for noise cancellation. To evaluate the efficiency of this study, we computed SNR and RSE value. Then we found the optimal mother wavelet function for thoracic sound.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.29-36
• /
• 2012

In CCPM Technique, as the buffer size calculation method, the Cut and Paste(C&P) method and the Root Square Error (RSE) method for all tasks carried out the same treatment, without considering the actual situation and characteristics of the task, the lack of reasonable judgment, is too simple and hasty. In this paper, taking into account the limitations of existing methods, a new method of buffer sizing method based on statistical analysis was introduced. It makes statistical analysis for the relationship between each worker and a variety of tasks, and use the information to predict the next task time. In order to verify the effectiveness of the new method, according to different task difficulty and the number of tasks set up the project. Use C&P, RSE method and new methods to predict the time of the project. Through Monte Carlo Simulation to simulate the project time, a comparison of three methods of performance. The results show that the new method can achieve the managers expect the probability of completion, and for those tasks can be completed ahead of schedule, the new method can save project time.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.199-206
• /
• 2013

Recently, the diverse needs of the drivers for in-vehicle infotainment systems are increasing rapidly. As a result, the infotainment systems are equipped with more convenient and human-friendly high-tech features. In this paper, we designed and implemented in-vehicle multimedia infotainment system based on embedded system that was applied various multimedia to in-vehicles. The proposed system can support independent display on each screen for the multi-channel multimedia source based on one processor(1 CPU). Therefore, our system can be reduced costs compared to other systems. This system not only displays the video and audio data in storage devices but also displays CAM, T-DMB, and DVB-T multimedia contents which are supplied in real-time services. Also, our system could multi-screen displays multimedia data in smart phone using Wi-Fi. We expect that in-vehicle infotainment systems like AVN(Audio video navigation) and RSE(Rear Seat Entertainment) could be used in various applications and reduced costs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.68-76
• /
• 2000

A total of 290 pork loins were selected to include a wide variation of quality to investigate the quality categories into which most pork falls, selection criteria for these categories and methods to objectively assess ultimate pork quality. They were probed at 24 h postmortem (PM) for the following: A) light reflectance by Danish Meat Quality Marbling (MQM), Hennessy Grading Probe (HGP) and Sensoptic Invasive Probe (SIP); B) electrical properties by NWK LT-K21 conductivity (NLT) and Sensoptic Resistance Probe (SRP): and C) pH by NWK pH-K21 (NpH). Also, measurements of % drip loss (PDL) and filter paper wetness (FPW), color brightness (L*), ultimate pH (pHu), lipid content, subjective color (SC), firmness/wetness (SF) and marbling scores (SM) were assessed. Each loin was categorized as either pale, soft and exudative (PSE), reddish-pink, soft and exudative (RSE), reddish-pink, firm and non-exudative (RFN) or dark, firm and dry (DFD). Statistically comparing coefficients of determination (CD), the results indicated that overall, the HGP predicted quality groups slightly better than MQM (CD=71 and 62% respectively), NpH and SRP were less effective (CD= 56 and 44% respectively), and SIP and NLT had the lowest values (CD=36 and 5% respectively). Combining various independent variable did not greatly improve the variation accounted for. When the data was sorted into marbling groups based on lipid content, this was not accurately predicted by any of the probe measurements. The MQM probe remained the best predictor for marbling class and accounted for about 25% of the lipid content variation. This was slightly improved to 33% when pHu was combined with MQM.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.72.2-72.2
• /
• 2010

Nowadays, the crystalline Si Solar cell are expected for economical renewable energy source. The cost of the crystalline Si solar cell are decreasing by improvement of its efficiency and decrease of the cost of the raw Si wafers for Solar cells. This Si wafer based crystalline Si solar cell is the verified technology from several decade of its history. Now, I will introduce one method that can be upgrade the efficiency by using simple and economical method. The name of this method is Rear Side Etching(RSE). The purpose of rear side etching is the elimination of n+ layer of rear side and increase of the flatness. The effects of rear side etching are the improvement of Voc and increase of efficiency by reducement series resistance and forming of uniform BSF. The experimental procedure for rear side etching is very simple. After anti-reflection coating on solar cell wafer, Solar cell wafer is etched by the etching chemical that react with only rear side not front side. This special chemical is no harmful to anti-reflection coating layer. It can only etched rear side of solar cell wafer. We can use etching image by optical microscope, minority carrier life time by WCT 120, SiNx thickness and refractive index by ellipsometer, cell efficiency for the RSE effect measurement. The key point of rear side etching is development of etching process condition that react with only rear side. If we can control this factor, we can achieve increase of solar cell efficiency very economically without new device.