• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.55-62
• /
• 2014

FTSR(Flight Termination System Receiver) is a device that receives a ground command signal to abort a flight mission when abnormal conditions occur in the space launch vehicle. The secure tone command message shall consist of a series of 11 character tone pattern. Each character consists of the sum of two tones which taken from a set of 7 tones defined by IRIG(Inter-Range Instrumentation Group) in the audio frequency range. The MHA(Modified High alphabet) command adds a security feature to the secure tone command by using the predefined difference code. In order to check the function and performance of MHA FTSR, which is under development, for KSLV-II, the testbed should have functions of RF signal generation, receiver's output port monitoring, RS-422 communication and test data management. In this paper, we first briefly introduce MHA command and FTSR interface, and then show the LavVIEW based testbed include its H/W configuration, S/W implementation and test results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.657-665
• /
• 2000

In this study, the bit error rate(BER) performance for the speech and data traffic is evaluated by results of the reverse link simulation of CDMA-based IMT-2000. Simulations in the reverse link are achieved for indoor, pedestrian, and vehicular environments, which are provided by ITU-R . Also, in the these simulations, the fast power control of 1.6kHz rate is applied. The amplitude and phase of the fading signal are estimated by using the 5-tap FIR filter, and the soft-decision Viterbi and Reed-Solomon (RS) decoding are applied. Simulation results provide the optimum ratio of pilot power to traffic power, the BER performance according to the number of fingers, and performance comparison between convolutional code and concatenated code at $10^-6$ BER in 5 MHz system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.889-895
• /
• 2010

MIMO system generally requires more than one antenna at the communication device. However, many wireless devices are limited by size, cost or hardware complexity to one antenna. To overcome such restrictions, we used a new technique, called cooperative communication. We propose a new cooperative transmission strategy system using cross-layer coding method base on H-ARQ for optimal communication. Proposed cooperative H-ARQ system that can improve the above problems and can get the better performance. In proposed cooperative system with H-ARQ method, if the received signal from source node is satisfied by the destination preferentially, the destination transmit ACK message to both relay node and source node, and then recovers the received signal. In addition, if ARQ message indicates NACK message, relay node operates selective retransmission. Based on the simulation results in aspect to BER performance and throughput, the proposed method which combined cooperative system with H-ARQ based on cross-layer coding can improve spectral efficiency reliability of system compared with that of general one by one system.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.423-426
• /
• 2005

In this paper, we propose a receiver that combines a channel detector with a channel decoder to retrieve information from ISI and AWGN in an iteratively manner. The receiver, evolving from a system of a PRML detector and a RS decoder, consists of a SOVA detector followed by a LDPC decoder and has them exchange information iteratively. Rather than handling extrinsic reliabilities explicitly as in Turbo equalization, we take hard-decision values from the LDPC decoder and mix them with the channel output in a certain ratio as input for SOVA. The scheme, simply modified to the one-way structure of a SOVA and a LDPC decoder, shows improved performance with iteration numbers as well as the combining ratio of the channel output and the feedback output. We additionally analyze the receiver with a simple theoretical model and present some valuable properties.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.7
• /
• pp.90-97
• /
• 1989

In this paper, we have taken the formation of two-dimension codeword named doubly-encoded code using the Reed-Solomon code, C1(32, 28) with minimum distance 5 and C2(32, 26) with minimum distance 7 and we have had computer simulation of these error correcting processes using modeled R-DAT (Rotationary Digital Audio Tape). As the result, the error rate per symbol has been decreased about 0.05 and on these processes, the newly developed digital signal processing technology such as erro correction using Berlekamp-Massey algorithm in frequency domain have been proven.

• Journal of Broadcast Engineering
• /
• v.8 no.3
• /
• pp.228-237
• /
• 2003

Eureka-147 DAB(Digital Audio Broadcasting) system on which DMB(Digital Multimedia Broadcasting) system is based, was designed for the requirements of CD qualify audio with ${10}^{-4}$ bit error rate. Audio program may be primary service in DAB system, but multimedia program can be primary service in DMB system. Therefore, the bit error rate required must be below ${10}^{-7}$∼${10}^{-8}$ to transmit multimedia data via DMB channel. In order to meet the requirements and keep backward compatibility of DAB system we propose an outer channel coding scheme using Reed-Solomon coding and convolutional interleaving. This paper shows the simulation results for DMB channel performance based on mobile channel model. Also, it describes the needs and the effects of the outer channel coding.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.23-29
• /
• 2004

This paper deals with Reed-Solomon Coding for EUROFIX system EUROFIX is an integrated navigation and communication system, which combines Differential GNSS and Loran-C EUROFIX transmits DGNSS(Differential Global Navigation Satellite Systems) (data by pulse position modulation of Loran-C pulses. Loran-C system is regarded as a satellite backup system in recent. And now, it is important to detect and correct much errors in communication systems. Error corrections or correction algorithm is actively studied nowadays because of this. In this paper, we study and design encoder and decoder of Reed Solomon Code using Finite Galois Field Fourier Transformation for error corrections in EUROFIX data transmission. Through extensive simulation, the designed Reed Solomon code is shown to be effective for error correction in EUROFIX data transmission.