• Spatial Information Research
• /
• 제11권3호
• /
• pp.203-212
• /
• 2003

본 연구에서는 지반공간의 이해를 증진시키기 위하여 지반조사 자료를 통합하기에 용이한 3차원 GIS를 기반으로 하는 접근을 제안하고, 무안의 주거지 밀집지역에서 발생한 지반침하 지역에 대한 연구를 수행하였다. 본 연구대상 지역은 석회암을 기반암으로 하는 지역이므로 기반암종의 지질적인 구성이 침하발생에 중요한 인자가 된다. 석회암은 지하수로 인해 용식되어 공동을 생성하기 때문에 지하수의 통로가 되는 절리나 파쇄대의 파악이 중요하다. 따라서 유사한 기반암 구성별로 군집화하여 지반을 분류하였으며, 효과적인 지반정보 분석을 위하여 3차원 GIS를 통해 시추공 정보를 가시화하고 통합 분석하였다. 이에 따라 지반정보의 왜곡이 감소되어 지반공간에 대한 효율적인 분석이 가능하게 하였다.

• 터널과지하공간
• /
• 제5권4호
• /
• pp.336-346
• /
• 1995

Geotechnical Information System (GTIS) for efficient management of three dimensional borehole data has been developed. Some problems were raised during the input process of borehole data, and alternative solutions were sought. According to the previous geotechnical reports, there is no unified weathering classification scheme. A criterion, 100 times/30cm from SPT, was turned out inappropriate to the discrimination of weathered rock from weathered soil. It has also been suggested that weathered soil, weathered rock, soft rock, and hard rock should be defined as CW, HW, MW, and SW~fresh condition. For better comparison of RQD, the use of NX size coring is recommended for the whole area although BX size coring has been used in excavated area. The limit of drilling depth up to 1 m from the top of surface of hard rock should be extended to avoid possible wrong interpretation of rock head due to the existence of corestone. The input data were analysed by geostatistical methods. It is found that the range in semivariogram is about 300m, and the variance of gneiss is greater than that of granite. It is because the granite data analysed came from almost single uniform rock mass(i.e.Seoul granite), but gneiss data came from the rock mass(i.e. Gyeonggi gneiss complex experienced several metamorphic metamorphic processes.

• Geomechanics and Engineering
• /
• 제22권6호
• /
• pp.489-496
• /
• 2020

This study proposes a new empirical model to effectively predict the excavation performance of a shield tunnel boring machine (TBM). The TBM performance is affected by the geological and geotechnical characteristics as well as the machine parameters of TBM. Field penetration index (FPI) is correlated with rock mass parameters to analyze the effective geotechnical parameters influencing the TBM performance. The result shows that RMR has a more dominant impact on the TBM performance than UCS and RQD. RMR also shows a significant relationship with the specific energy, which is defined as the energy required for excavating the unit volume of rock. Therefore, the specific energy can be used as an indicator of the mechanical efficiency of TBM. Based on these relationships with RMR, this study suggests an empirical performance prediction model to predict FPI, which can be derived from the correlation between the specific energy and RMR.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.453-458
• /
• 2018

Geomechanical parameters are important factors for engineering projects during design, construction and support stages of tunnel and dam projects. Geostatistical estimation methods are known as one of the most significant approach at estimation of Geomechanical parameters. In this study, Azad dam headrace tunnel is chosen to estimate Geomechanical parameters such as Rock Quality Designation (RQD) and uniaxial compressive strength (UCS) by ordinary kriging as a geostatistical method. Also Rock Mass Rating (RMR) distribution is presented along the tunnel. Main aim in employment of geostatistical methods is estimation of points that unsampled by sampled points.To estimation of parameters, initially data are transformed to Gaussian distribution, next structural data analysis is completed, and then ordinary kriging is applied. At end, specified distribution maps for each parameter are presented. Results from the geostatistical estimation method and actual data have been compared. Results show that, the estimated parameters with this method are very close to the actual parameters. Regarding to the reduction of costs and time consuming, this method can use to geomechanical estimation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1-11
• /
• 2006

To be design the slope, the area distributed the shale or mica schist which was metamorphosed by shale must carefully consider the stability. The shale has the detrital materials of which the grain size are 1/256mm and fissility. As the reason the slope of shale is always unstable by bedding slip and fissility but also the joint and fault. Mica schist is also another unstable rock for slope by schistosity, cleavage, axial plane of a fold etc. In general shale and mica schist contain the swelling clay minerals such as smectite, vermiculite and montmorillonite. These minerals make the slope unstable. At OO tunnel construction area for the rail way of the Kyungbu high speed train, the slope of mica schist is very unstable by the distribution phenomena of the discontinuous plane such as joints which are 1-5cm spacing and thrust and strike-slip fault. By the drilling core of this area, most RQD have 0-20%.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.603-610
• /
• 2005

The end bearing behavior of piles socketed in weathered/soft rock is generally dependent upon the mass conditions of rock with fractures rather than the strength of intact rock. However, there are few available data and little guidance in the prediction of the end bearing capacity of drilled shafts socketed in weathered/soft rock, considering rock mass weathering. Therefore, a database of 13 load tests was constructed first, and new empirical relationships between the base reaction modulus of piles in rock and rock mass properties were developed. No correlation was found between the compressive strengths of intact rock and the base reaction modulus of weathered/soft rock. The ground investigation data regarding the rock mass conditions(e.g. Em, Eur, RMR, RQD) was found to be highly correlated with the base reaction modulus, showing the coefficients of correlation greather than 0.7 in most cases. Additionally, the applicability of existing methods for the end bearing capacity of piles in rock was verified by comparison with the field test data.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1882-1889
• /
• 2007

Surveying rocks for engineering aims for prediction of geological feature of the construction site. Conventionally, survey information at outcrops and bore holes are projected to the construction sites, such as tunnel and slopes, and rock properties of the sites are predicted by interpretations of specialists. This system, the "Fracjection", aims to assist the specialist for visualization of the projected fractures from borehole and outcrop survey. The Fracjection accepts the BIPS and outcrop survey data to its database and allows plotting them in AutoCad map. The software also reads elevation data from contours of the topographic map and constructs DEM of the construction sites. With user's guide, it generates 3D excavation sites such as slopes and tunnels at the topographic map. The s/w projects borehole and outcrop surveyed fractures onto the modeled excavation surface and allows analysis of failure criteria, such as plane, wedge, and toppling failures by built-in stereonet function. Projected fractures can further be analyzed for structural homogeneities and rock mass quality. Moving window style correlation comparison of stereonet plots are used for formal analyses, and RQD type counts of the projected fractures are adopted for the latter analyses.

• 한국지반환경공학회 논문집
• /
• 제11권12호
• /
• pp.37-45
• /
• 2010

초미립자시멘트는 입자 크기가 마이크로화되어 실트성 지반까지 주입가능하지만 점성이 높아 침투성이 저하되는 단점이 있다. 본 연구에서는 유동화제를 사용하여 점성을 낮춘 초미립자주입재의 그라우팅 효과를 평가하고자 암반에서 초미립자주입재와 보통시멘트주입재의 주입효과를 비교하였다. 시추조사, 현장수압시험, 공내재하시험, 공내전단시험, 단위주입량분석, p~q~t chart 유형 분석을 실시하였다. 시험 결과 초미립자주입재를 사용하는 경우가 보통시멘트 주입재를 사용하는 경우보다 투수성, 탄성계수 및 변형계수, 단위주입량 및 주입재 회수율 등 측면에서는 유리하지만 전단응력 측면에서는 차이가 거의 없는 것으로 나타났다.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.475-487
• /
• 2024

Many uncertainties affect the stability assessment of rock structures. Some of these factors significantly influence technology decisions. Some of these factors belong to the geological domain, and spatial uncertainty measurements are useful for structural stability analysis. This paper presents an integrated approach to study the stability of rock structures, including spatial factors. This study models two main components: discrete structures (fault zones) and well known geotechnical parameters (rock quality indicators). The geostatistical modeling criterion are used to quantify geographic uncertainty by producing simulated maps and RQD values for multiple equally likely error regions. Slope stability theorem would be demonstrated by modeling local failure zones and RQDs. The approach proided is validated and finally, the slope stability analysis method and fuzzy Laypunov criterion are applied to mining projects with limited measurement data. The goals of this paper are towards access to adequate, safe and affordable housing and basic services, promotion of inclusive and sustainable urbanization and participation, implementation of sustainable and disaster-resilient buildings, sustainable human settlement planning and manage. Simulation results of linear and nonlinear structures show that the proposed method is able to identify structural parameters and their changes due to damage and unknown excitations. Therefore, the goal is believed to achieved in the near future by the ongoing development of AI and fuzzy theory.

• 화약ㆍ발파
• /
• 제28권2호
• /
• pp.133-147
• /
• 2010

본 연구에서는 암반분류를 현장에서 바로 실시할 수 있는 암반분류법을 도출하고 도출된 분류법과 기존분류법간의 상관관계를 고찰하는데 그 목적이 있다. 암반 묘사를 위한 분류인자를 먼저 암반강도와 암반구조로 나누었으며, 암반강도는 점하중강도와 절리상태, 암반구조는 RQD와 절리간격을 통하여 평가하였다. 변수의 평가를 위한 지표는 기존의 분류법에서 획득하여 이용하였으며, 이를 통하여 암반의 강도 특성과 구조적 특성을 모두 나타내었다. 도출된 각 각의 변수에는 25점의 배점을 할당하였다. $RMR_{basic}$과 본 연구와의 상관관계는 $RMR_{basic}$ = 0.86(X-Method)+14.47, 수정 RMR과 본 연구와의 상관관계는 $RMR^*$ = 0.87(X-Method)+9.20로 나타났다. 결정계수는 각각 $R^2$=0.841, $R^2$=0.846으로 나타났다.