• 한국압력기기공학회 논문집
• /
• 제13권2호
• /
• pp.60-66
• /
• 2017

The standard master curve (MC) approach has the major limitation because it is only applicable to homogeneous datasets. In nature, materials are macroscopically inhomogeneous and involve scatter of fracture toughness data due to various deterministic material inhomogeneity and random inhomogeneity. RPV(reactor pressure vessel) steel has different fracture toughness with varying distance from the inner surface of the wall due to cooling rate in manufacturing process; deterministic inhomogeneity. On the other hand, reference temperature, $T_0$, used in the evaluation of fracture toughness is acting as a random parameter in the evaluation of welding region; random inhomogeneity. In the present paper, four regions, the surface, 1/8T, 1/4T and 1/2T, were considered for fracture toughness specimens of KSNP (Korean Standard Nuclear Plant) SA508 Gr. 3 steel to investigate deterministic material inhomogeneity and random inhomogeneity. Fracture toughness tests were carried out for four regions and three test temperatures in the transition region. Fracture toughness evaluation was performed using the bimodal master curve (BMC) approach which is applicable to the inhomogeneous material. The results of the bimodal master curve analyses were compared with that of conventional master curve analyses. As a result, the bimodal master approach considering inhomogeneous materials provides better description of scatter in fracture toughness data than conventional master curve analysis. However, the difference in the $T_0$ determined by two master curve approaches was insignificant.

• Nuclear Engineering and Technology
• /
• 제18권1호
• /
• pp.27-37
• /
• 1986

본 논문에서는 고리 1호기의 원자로 압력용기와 1차 콘크리트 차폐체 사이의 인자로 공동에서의 발사선 흐름 현상을 평가하였다. 원자로 압력용기 외부 표면에서 방출되는 누출 선속을 계산하기 위해 사용될 적합한 중성자 단면적 자료를 얻기 위하여, DLC-23/CASK, DLC-31/FEWG그리고 DLC-47/BUGLE 등 세 가지의 중성자 단면적 자료에 대한 검증 계산을 수행하였다. 누출 선속 계산은 ANISN으로 1차원적 계산을, DOT3.5로 2차원적 계산을 수행하였으며, 또한 원자로 공동에서의 방사선 흐름 현상을 분석하기 위하여, 알베도 개념이 도입된 몬테카를로 방법을 사용하는 MORSE-CG 전산 코드를 이용하여 3차원적 해석을 하였다. 그리고, 원자로 플랜지 부위에서의 방사화 분석을 수행하여 스터드 볼트의 방사화 정도를 평가하였다.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.109-114
• /
• 2014

After the Fukushima accident in 2011, it was revealed that nuclear power plant has the vulnerability to SBO accident and its extension situation without sufficient cooling of reactor core resulting core meltdown and radioactive material release even after reactor shutdown. Many safety systems had been developed like PAFS, hybrid SIT, and relocation of RPV and IRWST as a part of steps for the Fukushima accident, however, their applications have limitation in the situation that supply of feedwater into reactor is impossible due to high pressure inside reactor pressure vessel. The concept of hybrid heat pipe with control rod is introduced for breaking through the limitation. Hybrid heat pipe with control rod is the passive decay heat removal system in core, which has the abilities of reactor shutdown as control rod as well as decay heat removal as heat pipe. For evaluating the cooling performance hybrid heat pipe, a commercial CFD code, ANSYS-CFX was used. First, for validating CFD results, numerical results and experimental results with same geometry and fluid conditions were compared to a tube type heat pipe resulting in a resonable agreement between them. After that, wall temperature and thermal resistances of 2 design concepts of hybrid heat pipe were analyzed about various heat inputs. For unit length, hybrid heat pipe with a tube type of $B_4C$ pellet has a decreasing tendency of thermal resistance, on the other hand, hybrid heat pipe with an annular type $B_4C$ pellet has an increasing tendency as heat input increases.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(1)
• /
• pp.465-470
• /
• 1996

본 연구는 원자로 RPV(Reactor Pressure Vessel)를 두 개의 이상적인 입체 구조물 즉, 원통면과 반구로 나누어, 원통면에서의 충격위치를 검출할 수 있는 알고리즘을 제안하고 그 효용성을 고찰하는데 있다. 현재 사용중인 원전내네 금속파편 감시계통(LPMS : Loose Parts Monitoring System)의 경우 충격신호를 레코더에 저장하고 전문가를 통해 데이터베이스화된 기준신호와 비교 분석하는 Off-line분석방법을 사용해 왔다. 그리나 이러한 방법은 많은 소요시간을 가지므로 손상잠재성이 큰 경우 즉각적인 대처를 할 수가 없다는 단점을 가진다. 따라서 본 논문에서는 이러한 방법을 지양하고 센서로부터 얻은 충격신호를 분석컴퓨터에 입력하여 즉각적으로 충격위치를 찾을 수 있는 On-line분석방법을 제안함에 있어, 기초적 연구로서 원통면에서의 충격위치 검출방법을 제시하였다.

• Nuclear Engineering and Technology
• /
• 제52권12호
• /
• pp.2803-2811
• /
• 2020

With the aging of nuclear reactors, embrittlement of the reactor pressure vessel (RPV) steel, as a consequence of routine operations, is highly probable. To ensure operational integrity and safety, prediction and mitigation of compromising damage, brought on by pressurized thermal shock (PTS) following an emergency procedure, is of utmost importance. Computational fluid dynamics (CFD) codes can be employed to predict these events and have therefore been an acceptable method for such assessments. In this paper, CFD simulations of a density driven ECC state in the ROCOM facility are analyzed. Obtained numerical results are validated with the experimental measurements. Considerable attention is attributed to the boundary conditions and their influence, specifically outlet definitions, in order to determine and adequately replicate the non-active pumps in the facility. Consequent analyses focused on initial conditions as well as on the temporal discretization and inner iterations. Disparities due to different turbulent modelling approaches are investigated for standard RANS models. Based on observed trends for different cases, a definitive simulation setup has been established, results of which have been ultimately compared to the measurements.

• 대한금속재료학회지
• /
• 제48권3호
• /
• pp.194-202
• /
• 2010

Application of a stronger and more durable material for reactor pressure vessels (RPVs) might be an effective way to insure the integrity and increase the efficiency of nuclear power plants. A series of research projects to apply the SA508 Gr.4 steel in ASME code to RPVs are in progress because of its excellent strength and durability compared to commercial RPV steel (SA508 Gr.3 steel). In this study, the microstructural characteristics and mechanical properties of SA508 Gr.3 Mn-Mo-Ni low alloy steel and SA508 Gr.4N Ni-Mo-Cr low alloy steel were investigated. The differences in the stable phases between these two low alloy steels were evaluated by means of a thermodynamic calculation using ThermoCalc. They were then compared to microstructural features and correlated with mechanical properties. Mn-Mo-Ni low alloy steel shows the upper bainite structure that has coarse cementite in the lath boundaries. However, Ni-Mo-Cr low alloy steel shows the mixture of lower bainite and tempered martensite structure that homogeneously precipitates the small carbides such as $M_{23}C_6$ and $M_7C_3$ due to an increase of hardenability and Cr addition. In the mechanical properties, Ni-Mo-Cr low alloy steel has higher strength and toughness than Mn-Mo-Ni low alloy steel. Ni and Cr additions increase the strength by solid solution hardening. In addition, microstructural changes from upper bainite to tempered martensite improve the strength of the low alloy steel by grain refining effect, and the changes in the precipitation behavior by Cr addition improve the ductile-brittle transition behavior along with a toughening effect of Ni addition.

• Nuclear Engineering and Technology
• /
• 제41권6호
• /
• pp.765-774
• /
• 2009

For over 30 years, investigations of the thermohydraulic behavior of pressurized-water reactors under accident conditions have been carried out in the PKL test facility at AREVA NP in Erlangen, Germany. The PKL facility models the entire primary side and significant parts of the secondary side of a of pressurized water reactor at a height scale of 1:1. Volumes, power ratings and mass flows are scaled with a ratio of 1:145. The experimental facility consists of four primary loops with circulation pumps and steam generators (SGs) arranged symmetrically around the reactor pressure vessel (RPV). The investigations carried out encompass a very broad spectrum from accident scenario simulations with large, medium, and small breaks, over the investigation of shutdown procedures after a wide variety of accidents, to the systematic investigation of complex thermohydraulic phenomena. The PKL tests began in the mid 1970s with the support of the German Research Ministry. Since the mid 1980s, the project has also been significantly supported by the German PWR operators. Since 2001, 25 partner organizations from 15 countries have taken part in the PKL investigations with the support and mediation of the OECD/ NEA (Nuclear Energy Agency). After an overview of PKL history and a short description of the facility, this paper focuses on the investigations carried out since the beginning of the international cooperation, and shows, by means of some examples, what insights can be derived from the tests.

• 시스템엔지니어링학술지
• /
• 제16권2호
• /
• pp.27-37
• /
• 2020

The Fukushima Daiichi accident in 2011 revealed some vulnerabilities of existing Nuclear Power Plants (NPPs) under extended Station Blackout (SBO) accident conditions. One of the key Severe Accident Management (SAM) strategies developed post Fukushima accident is the In-Vessel Retention (IVR) Strategy which aims to retain the structural integrity of the Reactor Pressure Vessel (RPV). RELAP/SCDAPSIM/MOD3.4 is selected to predict the thermal-hydraulic response of APR1400 undergoing an extended SBO. To assess the effectiveness of the IVR strategy, it is essential to quantify the underlying uncertainties. In this work, both the epistemic and aleatory uncertainties are considered to identify the success window of the IVR strategy. A set of in-vessel relevant phenomena were identified based on Phenomena Identification and Ranking Tables (PIRT) developed for severe accidents and propagated through the thermal-hydraulic model using Wilk's sampling method. For this work, a Systems Engineering (SE) approach is applied to facilitate the development process of assessing the reliability and robustness of the APR1400 IVR strategy. Specifically, the Kossiakoff SE method is used to identify the requirements, functions and physical architecture, and to develop a design verification and validation plan. Using the SE approach provides a systematic tool to successfully achieve the research goal by linking each requirement to a verification or validation test with predefined success criteria at each stage of the model development. The developed model identified the conditions necessary for successful implementation of the IVR strategy which maintains the vessel integrity and prevents a melt-through.

• 한국자기학회지
• /
• 제15권2호
• /
• pp.142-147
• /
• 2005

고속 중성자 조사한 원자로 압력 용기의 취하현상을 상온에서 X-선 회절 실험과 액체 질손 온도에서 M$\ "{o}$ssbauer 분광법으로 조사하였다. 시료의 중성자 조사량은 $10^{12},\;10^{13},\;10^{14},\;10^{15},\;10^{16},\;10^{17},\;10^{18}\;n/{\cal}cm^2$이다. X-선 회절 패턴에서 중성자 조사하지 않은 시료는 bcc 형태를 나타내었으나, 중성자 조사량이 $10^{17}\;n/{\cal}cm^2$ 이상인 시료에서는 bcc 구조가 사라지는 심각한 손상을 보였다. 모든 시료의 $M\ddot{o}ssbauer$ 스펙트럼은 두개 혹은 그 이상의 sextet의 중첩을 보였다. 모든 $M\ddot{o}ssbauer$ 스펙트럼은 본문에서는 3조의 sextet로 fitting 하였다. 이성질체 이동치와 사중극자 분열치는 거의 영에 가까운 값을 나타내었다. 액체 질소 온도에서 중성자 조사량이 $10^{17}\~10^{18}\;n/{\cal}cm^2$인 시료에서 S1 sextet의 초미세 자기장과 흡수 면적이 급격히 상승하는 현상을 관측하였으며, 상온에서 또한 이 현상을 관측하였다. 이는 중성자 조사에 의한 시료 내부의 $^{55}Mn$ 혹은 $^{56}Fe$이 $^{57}Fe$의 천이에 의한 $^{57}Fe$의 $M\ddot{o}ssbauer$ 핵종의 증가에 기인하는 것으로 추측된다.

• 한국재료학회지
• /
• 제10권4호
• /
• pp.305-311
• /
• 2000

샤피 V-노치 충격 하중-변위 곡선으로부터 얻은 균열정지하중을 이용하여 원자로압력용기강의 균열정지파괴인성($K_{Ia}$)을 예측할 수 있는 방법을 모색하고 그 타당성을 고찰하였다. 샤피충격 하중-변위 곡선으로부터 얻은 균열정지하중값의 변화는 특성온도로 보정된 지수함수의 형태로 잘 표현될 수 있었다. 특성온도 $T_{Pa=2kN}$은 실험적인 무연성천이온도($T_{NDT}$) 및 $T_{41\;J}$과 높은 상관성을 나타냈으며, 원자로압력용기강의 균열정지파괴인성을 표현하는 새로운 특성온도로 사용할 수 있을 것으로 판단되었다. 또한 균열정지하중값의 변화는 파면으로부터 측정된 안정균열길이의 변화와 매우 높은 상관성을 나타내었다. 따라서 무딘 노치를 갖는 시편에 대한 계장화샤피충격시험을 통하여 균열정지하중 및 안정균열길이를 측정하믈써 비교적 정확하게 원자로압력용기강에 대한 하한값의 파괴인성치($K_{Ia}$)를 평가하는 것이 가능한 것으로 판단되었다.