• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.298-304
• /
• 2011

We conducted magnetic survey using IBRV (Ice Breaker Research Vessel) ARAON of KORDI (Korea Ocean Research and Development Institute), ROV (Remotely Operated Vehicle) of Oceaneering Co. and three components vector magnetometer, at Apr., 2011 in the western slope of the caldera of TA25 seamount, the Lau Basin, the southwestern Pacific. The depth ranges of the survey area are from about 900 m to 1200 m, below sea level. For the deep sea magnetic survey, we made the nation's first small deep sea three components magnetometer of Korea. The magnetometer sensor and the data logger was attached with the upper part and lower part of ROV, respectively. ROV followed the planning tracks at 25 ~ 30 m above seafloor using the altimeter and USBL (Ultra Short Base Line) of ROV. The three components magnetometer measured the X (North), Y (East) and Z (Vertical) vector components of the magnetic field of the survey area. A motion sensor provided us the data of pitch, roll, yaw of ROV for the motion correction of the magnetic data. The data of the magnetometer sensor and the motion sensor were recorded on a notebook through the optical cable of ROV and the network of ARON. The precision positions of magnetic data were merged by the post-processing of USBL data of ROV. The obtained three components magnetic data are entirely utilized by finding possible hydrothermal vents of the survey area.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.5
• /
• pp.374-380
• /
• 2016

The large drift and angle of attack motion of an ROV (Remotely operated vehicle) cannot be modeled using the typical hydrodynamic coefficients of conventional straight running AUVs and specific slender bodies. In this paper, the ROV hull is divided into several simple-shaped components to model the hydrodynamic force and moment. The hydrodynamic force and moment acting on each component are modeled as the components of added mass force and drag using the known values for simple shapes such as a cylinder and flat plate. Since an ROV is operated under the water, the only environmental force considered is the current effect. The target ROV dealt with in this paper has six thrusters, and it is assumed that its maneuvering motion is determined using a thrust allocation algorithm. Tracking simulations are carried out on the ship’s surface near the stern, bow, and midship sections based on the modeling of the hydrodynamic force and current effect.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.451-458
• /
• 2012

In this paper, the design study of a new convertible six d.o.f underwater robot which can be a ROV or AUV according to underwater work purpose is presented. A structure design about the ROV and the AUV and its design on the control system is presented. In case of the AUV, an analysis on thruster forces in accordance with operating speed has been performed. A sensor fusion board which can proceed various sensor signals to identify correct positions and speeds has been developed and a total control system including EKF(Extended Kalman Filter) has been designed and developed.

• Ocean Systems Engineering
• /
• v.3 no.3
• /
• pp.237-255
• /
• 2013

In many applications, Remotely Operated Vehicles (ROVs) are required to be capable of course keeping, depth keeping, and height keeping. The ROV must be able to resist time-variant external forces and moments or frequent manipulate changes in some specified circumstances, which require the control system meets high precision, fast response, and good robustness. This study introduces a Fuzzy-Incomplete Derivative Ahead-PID (FIDA-PID) control system for a 500-meter ROV with four degrees of freedom (DOFs) to achieve course, depth, and height keeping. In the FIDA-PID control system, a Fuzzy Gain Scheduling Controller (FGSC) is designed on the basis of the incomplete derivative ahead PID control system to make the controller suitable for various situations. The parameters in the fuzzy scheme are optimized via many cycles of trial-and-error in a 10-meter-deep water tank. Significant improvements have been observed through simulation and experimental results within 4-DOFs.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1250-1253
• /
• 2017

본 논문은 드론 산업이 발전함에 따라 하천, 호수, 바다 상공에서 활용하는 드론이 수중에 빠졌을 때, 물에 빠진 드론을 모선(Mothership)과 집게팔이 달린 ROV(Remotely Operated Vehicle)를 이용하여 인양하는 시스템을 제안한다. 제안한 시스템의 구성 요소는 세 가지로 첫 번째는 실시간으로 GCS(Ground Control Station)에 영상을 전송하며 ROV와 전력선 모뎀을 이용하여 통신을 하는 모선, 두 번째는 수중에 들어가 수중 카메라를 이용하여 육안으로 드론을 탐색하고 장착된 집게팔로 드론을 몸체에 고정시키는 ROV, 세 번째는 모선, ROV와 실시간으로 영상 데이터와 명령 신호를 주고 받는 GCS 이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.423-436
• /
• 2003

Submarine optical fiber cable construction consists of marine survey, PLGR(Pre Lay Grapnel Run), shore-end-work, laying order. PLGR is the work process which removes the oceanic contaminations(ropes, wires, nets etc.) in the route before laying the submarine optical cable. This PLGR is work to ease the cable lay safely in seabed, improve the performance of Plough and ROV((Remotely-Operated Vehicle) laying work, and protect laying equipment. This paper presents the optimization algorithm implementation of KP(Kilometer Post) and XTE(Cross Track Error) to manage marine survey and PLGR work efficiently. In this paper, we composes overall PLGR work, and proposed optimization algorithm of KP and XTE. For the validity evaluation of this paper, KP and XTE decision algorithm are implemented and tested.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.4
• /
• pp.23-31
• /
• 2010

The flow around a remotely-operated vehicle (ROV) has been investigated numerically to improve the resistant performance by modifying the hull form of the ROV. In the case of the base hull form considered in this study, form drag rather than friction drag was the dominant component of total drag. Subsequently, the surfaces that were most susceptible to local pressure effects were modified to give them a more streamlined shape. Eleven different hull forms were chosen to undergo surface modification for drag reduction. In addition, four different boat-tail appendages with different slant angles were installed at the stern to reduce the wake vortices that are induced by the local regions of very low pressure. Consequently, a total of 11 different hull forms for drag reduction were considered. The final hull form, which combined the hull for which surface modification resulted in the lowest drag with a boat-tail appendage with a 15-degree slant angle, resulted in a drag reduction of 20%.

• Journal of Navigation and Port Research
• /
• v.27 no.1
• /
• pp.87-95
• /
• 2003

Submarine optical fiber cable construction consists of marine survey, PLGR(Pre Lay Grapnel Run), shore-end-work, laying the submarine optical cable. This PLGR is work to ease the cable lay safely in seabed, improve the performance of Plough and ROV (Remotely-Operated Vehicle) laying work, and protect laying equipment. This paper presents the design and implementation of real-time monitoring system for PLGR work in submarine optical fiber cable construction enterprise. In this paper, we designe overall real-time monitoring system. For this purpose, the modules such as serial multiport communication module, real-time processing module, environment configuration module, real-time graph and a printout modules are designed and implemented. For the validity evaluation of this paper, serial multi port communication module, data parsing, realtime graph output are implemented and tested.

• The Magazine of the IEIE
• /
• v.38 no.7
• /
• pp.20-29
• /
• 2011

무인잠수정(Unmanned Underwater Vehicle, UUV)은 하드웨어 구성과 관련하여 ROV (Remotely Operated Vehicle), SAUV (Semi-Autonomous Underwater Vehicle), AUV (Autonomous Underwater Vehicle) 등으로 구분할 수 있으며, 그 중에서 자율무인잠수정(AUV)은 주어진 임무의 난이도, 작업 환경의 정보, 그리고 운용자의 간섭 정도에 따라 다양한 수준으로 자율 정도를 분류한다. 무인잠수정은 미국을 중심으로 1952년부터 개발되기 시작하였으며 최초는 전적으로 운용자에 의해서 직접 운용되는 ROV가 주를 이루었다. 자율무인잠수정은 1980년대부터 다양한 수중관련 기술 및 컴퓨터 발전과, 민군의 사용분야가 증가되면서 급속한 발전을 이루어 왔으며 이에 따라 AUV 자율수준 정의와 기술개발도 급속한 진전이 이루어져 왔다. 본 기고에서는 무인잠수정의 개발현황, 자율개념 및 자율수준(Autonomy Levels for Underwater Vehicle, ALFUV)의 정의, 자율을 정립함에 필요한 방법 또는 기술 등을 알아보고 마지막으로 자율 알고리즘으로 개발된 구조의 표준화를 중심으로 현황을 파악하였으며 또한 미래의 자율수준 개발 동향을 살펴보았다.

• Structural Engineering and Mechanics
• /
• v.18 no.4
• /
• pp.429-440
• /
• 2004

Remotely Operated Vehicle of 6000-meters is a new conceptual equipment made to replace the manned systems for investigating the deep-sea environment, and all of the ROV systems in operational condition strongly depend on the connecting cables. In this point of view dynamics of the ROV cable system is very important for operational and safety aspects as a cable generally encounters great tension. Researches have been executed on this problem, and most of papers have been mainly focused on the operational condition of ROV system in deep sea. This paper presents the dynamic cable response analysis during ROV launching condition rather than the operational one in order to provide the design guide of a ROV cable system in this circumstance, considering the coupling effects between cable and wave-induced ship motion. To obtain the variations of cable tensions during a ROV launching, a pre-stressed harmonic response analysis was carried out. Wave-induced tensions of the cable during ROV launching were obtained in real sea states using FE modeling, and the basic design guide of a ROV cable system was obtained.