• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.792-801
• /
• 1996

A thinning algorithm -based image analysis technique was developed to measure corn root lengths. The root length measurement method was evaluated by comparing thread lengths measured by the image analysis system with actual thread lengths. The length measurement method accurately estimated actual thread lengths (less than 2% calculated error). Also, a rapid root length density measurement procedure, which utilizes the above root length measurement method, was developed to estimate corn root length density without washing the roots. Root length densities estimated from the cut soil surface of core samples taken from the field were paired with the root length densities determined from washed roots from the same soil core sample. A linear relationship between these two values was expected and was found. Eliminating the root washing procedure reduces the time required for measuring corn root length density substantially.

• Journal of Ginseng Research
• /
• v.17 no.3
• /
• pp.224-227
• /
• 1993

Weight (g/root) and bulk density (g/$cm^3$) of tap root in 15-root-grade of 4-year-old white ginseng were investigated by specific gravity and weight-volume method. Bulk density measured by specific gravity ranged from 0.8 to 1.2g/$cm^3$ with almost normal distribution in frequency (number 1 of roots). Bulk density measured by volume-weight method had significant correlation with root weight. The percentage of high bulk density root (above 1.0) showed significant positive correlation with mean root weight or mean bulk density of root weight, indicating that the growth conditions for large root provide the better compactnes of root tissue.

• Restorative Dentistry and Endodontics
• /
• v.39 no.1
• /
• pp.45-50
• /
• 2014

Ambiguity in the root morphology of the mandibular second molars is quite common. The most common root canal configuration is 2 roots and 3 canals, nonetheless other possibilities may still exist. The presence of accessory roots is an interesting example of anatomic root variation. While the presence of radix entomolaris or radix paramolaris is regarded as a typical clinical finding of a three-rooted mandibular second permanent molar, the occurrence of an additional mesial root is rather uncommon and represents a possibility of deviation from the regular norms. This case report describes successful endodontic management of a three-rooted mandibular second molar presenting with an unusual accessory mesial root, which was identified with the aid of multiangled radiographs and cone-beam computed tomography imaging. This article also discusses the prevalence, etiology, morphological variations, clinical approach to diagnosis, and significance of supernumerary roots in contemporary clinical dentistry.

• Journal of Ginseng Research
• /
• v.25 no.3
• /
• pp.130-135
• /
• 2001

Effects of media and growth regulators on the growth and saponin accumulation of ginseng root were investigated to develop the ginseng root culture system. When Panax ginseng C. A. Meyer roots were induced and cultured in various liquid media, the maximum root growth and saponin production were obtained in SH medium and an initial doubleing time of ginseng root was approximately 10 days. The patterns and contents of ginsenosides of cultured ginseng root in various media were different from each other. SH and White media resulted in higher total ginsenosides contents than the other media. Among different combinations and concentrations of growth regulators, SH medium containing 4.0mg/ L NAA gave best growth of ginseng roots, while saponin content was highest in SH medium containing 0.5mg/L BAP. These results suggested that the rapid production of ginseng saponin is possible by root culture of Panax ginseng.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.1
• /
• pp.38-43
• /
• 1998

This study examined root growth and distribution under the direct seeding of rice cultivars developed in Korea, Japan, and the U.S. Cultivars from the U.S., especially 'M202' and 'Caloro', had a high ratio of the dry matter partitioning for root and top plant components. Caloro had high root and top growth. 'Koshihikari' from Japan showed the lowest ratio of R/T (root/total dry matter) due to the small amount of root and top plant growth. Most Japanese cultivars except transplanted 'Hatsuboshi' showed low ratio of R/T. Patterns of root distribution for each soil block were recorded by the root box-pin board method. Roots of all cultivars were distributed in blocks A, C, and E in the middle of box, i.e., just below the plant base. Roots of 'Dongjin', M202, and Caloro were distributed deeper than the others. Roots of transplanted Hatsuboshi developed much better than direct seeded Hatsuboshi. Total root weight density was highest in Caloro followed by Dongjin, 'Gancheok', 'Calrose', and the others. The root density of Caloro was twice as much as those of the others except Dongjin. According to cumulative percentages of root distribution on each soil layer, roots of most cultivars were distributed below 20cm. The U.S. cultivars showed vertically well developed root systems as compared to others. A large amount of roots were distributed in the top 15cm of soil layer for Hatsuboshi and Koshinikari, and their root systems appeared to be shallow. In contrast, the rates of root distribution in the top 10cm of soil layer were low for Dongjin, Calrose, and Caloro. These cultivars had relatively deep root systems.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.2
• /
• pp.91-94
• /
• 2003

Rhizotron technique was used to determine the zone of active root growth in contrasting field situations. The distribution of roots with depth showed most root in the 15∼30 cm layer with fewer in the 0∼15 cm and below 30 cm layer at Lincoln Farm, while root density increased with depth at Winchmore. At Mt Johm (Lake Tekapo) roots were more distributed near soil surface. Root density was increased with fertilizer and irrigation at Mt John. Root number showed the same trends as root length at all lesions. Tube method was good for comparative purposes, and for long-term root growth studies at the same place.

• Korean journal of food and cookery science
• /
• v.24 no.3
• /
• pp.392-397
• /
• 2008

This study examined the quality characteristics of lotus root Julpyun prepared using different ratios of lotus root powder. According to the analyses results, the moisture contents of the lotus root powder-containing samples ranged from 32 to 35%, and the moisture content of the control sample(without added lotus root powder) was 8.5%. The L-values of samples decreased with increasing amounts of lotus root powder however, the a and b values of the samples did not show consistent trend. From the mechanical evaluation results, no consistent trends were found for hardness, springiness, or cohesiveness according to the levels of added lotus root powder. The 10% lotus root Jeolpyun had the highest adhesiveness score, but there were no significant differences between the samples. Gumminess and chewiness increased as the amount of lotus root powder increased, but again there were no significant differences between the samples. According to the sensory evaluation results, the 10% lotus root Jeolpyun received the highest preference scores. Therefore the 10% lotus root Jeolpyun prepared with 900 g of rice flour, 85 g of lotus root powder, 10 g of salt, and 294.5 g of water was chosen as the optimal formulation.

• Journal of Periodontal and Implant Science
• /
• v.38 no.1
• /
• pp.103-108
• /
• 2008

Purpose: Studies reported controversial results about prognosis of root resection with 0%-38% failure rate. The purpose of this study is to consider clinical efficacy of root resection. Materials and Methods: This study reported three cases of root resection which were performed on different sites. In first case, lower right first molar showed pus discharge and 7 mm of probing pocket depth. It was diagnosed as fracture of mesial root. Hemisection of mesial root was performed. In second case, upper right first molar showed severe bone loss on disto-buccal root and 7 mm of probing pocket. Resection of disto-buccal root was performed In third case, lower left second molar showed severe bone loss on distal root including apex and 15mm of probing pocket depth. Hemisection of distal root was performed. Result: In these three cases of root resection, compromised molars were treated successfully and conserved. Conclusion: Root resection is a successful procedure treating compromised multi-rooted teeth and conserving teeth when proper case selection is performed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.4
• /
• pp.42-51
• /
• 2010

The purpose of this study is to analyze the characteristics of environment-friendliness of Root Barrier materials based on comprehensive experiments on harmfulness of Root Barrier materials and fish toxicity of Oryzias latipes mortality to verify eco-toxicity of each method of construction and Root Barrier material, which are to be applied by taking eco-toxicity into account when building ecological flows in upper areas on natural and artificial grounds. As a result, the following conclusions have been reached in this study: 1. In regard of the harmfulness analyzed, each material showed a different result of analytical value in each lab tank. Compared to lab tank, pH (la), DO (lb), T-N (VI) and T-coli (la) were in the same grade, but COD, SS, T-P and F-coli were less than that of control, respectively increased or decreased by material were analyzed. 2. In the experiment of fish toxicity, Barrier sheet was found to have 66.7% of fish mortality, indicating strong fish toxicity. Synthetic rubber system root barrier sheet (20.0%) was analyzed to have medium fish toxicity, while Synthetic resin system root barrier-waterproof sheet (3.3%), Synthetic rubber system membrane root barrier sheet (3.3%) and Synthetic resin system root barrier sheet (0.0%) showed relatively lower mortality and fish toxicity. To sum up such results as found in the experiment mentioned so far, the values of harmfulness and root penetration resistance analyzed were different in each lab tank, but there was absolutely little correlation with the mortality gained from the experiment on fish toxicity. In the experiment of fish toxicity, environment-friendly root barrier materials were analyzed, and it was found that Synthetic resin system root barrier sheet, Synthetic resin system root barrier waterproof sheet and Synthetic rubber system membrane root barrier sheet are highly environment-friendly. In contrast, Synthetic rubber system root barrier sheet was found to have medium-level environment-friendliness. Also, Barrier sheet was analyzed to have low environment-friendliness.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.303-314
• /
• 2002

This study was performed to evaluate the usability of Er:YAG laser for periodontal therapy. Forty dental root slabs ($5{\times}5{\times}2mm^3$) were prepared from human periodontally diseased extracted teeth and grouped into 4 groups: 1) control (root planing only), 2) root planing and irradiated with laser at 30mJ, 3) root planing and irradiated with laser at 60mJ, and 4) root planing and irradiated with laser at 100mJ. The root slabs were embedded in resin block before laser treatment. Er:YAG laser was irradiated under water irrigation with the tip held perpendicular to the root surface in contact mode. After Er:YAG laser irradiation or planing on the root surface, morphological changes have been observed under SEM, and the micro-hardness and Ca/P ratio were compared. 1. In the Control group, the root surface showed the directional change caused by root planing instrumentation, and the presence of smear layer, and no exposure of dentinal tubule was observed. Laser irradiated group showed surface changes with rough dentin surface of niche and depression and dentinal tubule exposure by the elimination of smear layer. 2. The micro-hardness of root surface in the laser irradiated group was higher than the control group. The higher energy output was applied, the higher micro-hardness on root surface was resulted. 3. The higher energy output was applied, the higher Ca/P ratio was observed. The higher Ca/P ratio in 60mJ group and 100mJ group was statistically significantly compared to the control group and the 30mJ group. These results suggest that Er:YAG laser irradiation on the periodontally diseased root surface could remove smear layer and increase the micro-hardness on root surface and Ca/P ratio which contribute to enhance the acid resistance of periodontally treated root surface.