• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1022-1028
• /
• 2008

From the result of precise field investigation and stability examination for the rock slope, following results were acquired. 1. The weathering rock itself, existing fault zone and underground water complexly effect cut slope so that plane destruction may appear by fault zone. 2. The reinforcement force was decided by the result of limit equilibrium. 3. For rock cut slope, the Rock Bolt was judged as the most proper method to the cut slope as comparing/analyzing Rock Anchor, Rock Bolt and method after relaxing the slope.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.629-640
• /
• 2008

South anchorage(AN1, Myodo side) of supension bridge between Myodo and Gwangyang is designed as rock anchorage with 36m anchor length using the resistance of rock mass in Myodo. Checking the overall stability of the anchorage, we considered rock joints, bedding planes, fault zones and condition of rock structure in situ by analysis results for photo-lineaments, aerial photograph interpretation and drill-hole logs are considered. This anchorage consists of an access shaft, adit, and the upper and lower concrete bearing plate to introduce pre-stressing force into rock mass.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.97-111
• /
• 2015

The kinematical approach of limit analysis is used to estimate the three dimensional stability analysis of rock slopes with nonlinear Hoek-Brown criterion under earthquake forces. The generalized tangential technique is introduced, which makes limit analysis apply to rock slope problem possible. This technique formulates the three dimensional stability problem as a classical nonlinear programming problem. A nonlinear programming algorithm is coded to search for the least upper bound solution. To prove the validity of the present approach, static stability factors are compared with the previous solutions, using a linear failure criterion. Three dimensional seismic and static stability factors are calculated for rock slopes. Numerical results of indicate that the factors increase with the ratio of slope width and height, and are presented for practical use in rock engineering.

• 자연, 터널 그리고 지하공간
• /
• 제1권1호
• /
• pp.67-80
• /
• 1999

The Grout-reinforcement technique which is widely used during the excavation of a shallow or an endangered tunnel can be classified into a couple of groups according to the properties and injection methods of the grout. The reinforcement design will, therefore, take a different approach based on the grouting method under consideration. However, the injection procedure is mainly performed by the experience of the foreman rather than engineering judgement , specifically the permeation grouting through the rock joints and its reinforcement effect Is not fully under-stood during the design stage, In this study, the anisotropic material properties of the grout-reinforced rock masses are derived from the concept of composite materials and the effect of intact rock, vertical grouting and permeation grouting is, therefore, fully accounted for. Through the parametric studies on the characteristics of rock joints, intact rock and grouting materials, various case studies have been considered. The results, illustrated via the design charts, can be directly used during the reinforcement design.

• 한국어병학회지
• /
• 제29권1호
• /
• pp.7-12
• /
• 2016

In a previous study on the parasites of cultured rock bream (Oplegnathus fasciatus), we reported the discovery of a new species, Ceratomyxa oplegnathus, obtained from the gallbladder. In the present study, we found another Ceratomyxa species, C. sparusaurati, also from the gallbladder of rock bream. The morphological and ultrastructural characteristics of C. sparusaurati were investigated using light and transmission electron microscopy (TEM).

• 한국패션뷰티학회지
• /
• 제3권1호
• /
• pp.1-12
• /
• 2005

The purpose of this thesis is to study the formative characteristics and symbolism shown in Rock stars' hairstyles through rock music to have influenced youth culture. There were a D.A style and a mop top style which included the youth characteristic to seek a new desire and value as the hairstyles of Rock & Roll stars, along with the characteristics of Rock & Roll music to represent the feeling of teenagers in 1950's at that time unlike the previous music due to high beats mixed with Rhythm & Blues (R & B) and Country music, and use of electronic guitars. We can see the desire for challenge and freedom against the then present regime, shouting love and peace, and resistance in the Psychedelic Rock music stars' hairstyle, which are untrimmed and disheveled, that is, natural. We can find explosiveness in Mohican and Spike style of Punk Rock stars playing fierce and aggressive music, along with words including indignation and assertion against the society's regime. The Artistic characteristic is implied in the following hairstyles: Glam Rock stars' hairstyle, a man's long-haired but a little long crew-cut style to reduce the bulky feeling and to give a bisexual, visible shock with hair dyed in orange to emphasize magnificence, and Punk Rock stars' hairstyle showing beauty in their own way with expression of anti-beauty to intentionally look ugly. Like this, the 20th Century's Rock music and youth culture are closely associated each other, and showed a new style, and played a leading role in street fashion, which became a momentum to much influence high fashion as a look of the 20th century modern fashion.

• Geomechanics and Engineering
• /
• 제3권1호
• /
• pp.61-81
• /
• 2011

In this paper, a complement to the Hoek-Brown criterion is proposed in order to derive the strength of anisotropic rock from strength of the corresponding truly intact rock. The complement is a decay function, which unlike other modifications or suggestions made in the past, is multiplied to the function of the original Hoek-Brown failure criterion for intact rock. This results in a combined and extended form of the criterion which describes the strength of anisotropic rock as a varying fraction of the corresponding truly intact rock strength. Statistical procedures and in particular regression analyses were conducted into data obtained in experiments conducted in the current research program and those collected from the literature in order to define the Hoek-Brown's criterion complement. The complement function was best described by a simple polynomial including only three constants to be empirically evaluated. Further investigations also showed that these constants can be related to the other readily available parameters of rock material which further facilitate determining the constants. A great and prime advantage of the proposed complement is that it is mathematically simple including the least possible number of empirical constants which are easily estimated with minimum experimental effort. Moreover, proposed concept does not suggests any change to the original Hoek-Brown criterion itself or its constants and serves whenever anisotropy does exist in the rock. This further implies on the possibility of using any other failure criterion for intact rock in conjunction with the compliment to reach the strength of anisotropic rock.

• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.697-726
• /
• 2023

Brittleness as an important property of rock plays a crucial role both in the failure process of intact rock and rock mass response to excavation in engineering geological and geotechnical projects. Generally, rock brittleness indices are calculated from the mechanical properties of rocks such as uniaxial compressive strength, tensile strength and modulus of elasticity. These properties are generally determined from complicated, expensive and time-consuming tests in laboratory. For this reason, in the present research, an attempt has been made to predict the rock brittleness indices from simple, inexpensive, and quick laboratory test results namely dry unit weight, porosity, slake-durability index, P-wave velocity, Schmidt rebound hardness, and point load strength index using multiple linear regression, exponential regression, support vector machine (SVM) with various kernels, generating fuzzy inference system, and regression tree ensemble (RTE) with boosting framework. So, this could be considered as an innovation for the present research. For this purpose, the number of 39 rock samples including five igneous, twenty-six sedimentary, and eight metamorphic were collected from different regions of Iran. Mineralogical, physical and mechanical properties as well as five well known rock brittleness indices (i.e., B₁, B₂, B₃, B₄, and B₅) were measured for the selected rock samples before application of the above-mentioned machine learning techniques. The performance of the developed models was evaluated based on several statistical metrics such as mean square error, relative absolute error, root relative absolute error, determination coefficients, variance account for, mean absolute percentage error and standard deviation of the error. The comparison of the obtained results revealed that among the studied methods, SVM is the most suitable one for predicting B₁, B₂ and B₅, while RTE predicts B₃ and B₄ better than other methods.

• 한국지반공학회논문집
• /
• 제22권12호
• /
• pp.45-55
• /
• 2006

본 논문에서는 우리나라 태안지역에서 총 30회 수행한 암반앵커 현장시험의 결과를 나타내었다. 대상암반은 편마암으로써 풍화가 심한 것부터 신선한 암에 이르기까지 다양하며, 시험앵커의 깊이는 $1{\sim}4m$로 설치하였다. 앵커는 SD4O-D51mm를 사용함으로써 다른 파괴가 일어나기 전에 암반파괴가 먼저 일어나도록 유도하여 암반의 인발지지력을 파악하고자 하였다. 많은 시험에서 파괴는 극한하중까지 이르는 것을 관찰할 수 있었으며, 암반파괴형상은 암반이 들어올려지면서 방사상으로 균열이 발달하는 형상을 나타내었다. 시험결과, 암반앵커의 인발지지력은 암반의 종류, 암질, 앵커의 정착깊이, 앵커텐던의 인장강도 등에 영향을 받는 것으로 나타났다. 본 시험을 통해 암반앵커시스템의 인발지지력을 지배하는 주요파라메터들을 도출하고 이에 대해 논하였다.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.51-69
• /
• 2024

Currently, composite lining mountain tunnels in China are generally classified based on the [BQ] method for the surrounding rock grade. Increasingly, tunnel field construction is replicated indoors for scale down model tests. However, the development of analogous materials for model tests of composite lining tunnels with different surrounding rock grades is still unclear. In this study, typical Class III and V surrounding rock analogous materials and corresponding composite lining support materials were developed. The whole processes of excavation-support dynamics of the mountain tunnels were simulated. Data on the variation of deformations, contact pressures and strains on the surrounding rock were obtained. Finally, a comparative analysis between model tests and numerical simulations was performed to verify the rationality of analogous material development. The following useful conclusions were obtained by analyzing the data from the tests. The main analogous materials of Class III surrounding rock are barite powder, high-strength gypsum and quartz sand with fly ash, quartz sand, anhydrous ethanol and rosin for Class V surrounding rock. Analogous materials for rockbolts, steel arches are replaced by aluminum bar and iron bar respectively with both shotcrete and secondary lining corresponding to gypsum and water. In addition, load release rate of Class V surrounding rock should be less than Class III surrounding rock. The fenestration level had large influence on the load sharing ratio of the secondary lining, with a difference of more than 30%, while the influence of the support time was smaller. The Sharing ratios of secondary lining in Class III surrounding rock do not exceed 12%, while those of Class V surrounding rock exceed 40%. The overall difference between the results of model tests and numerical simulations is small, which verifies the feasibility of similar material development in this study.