• Fire Science and Engineering
• /
• v.19 no.1 s.57
• /
• pp.87-92
• /
• 2005

In this paper, numerical simulation are conducted to predict the characteristics of the heat transfer and smoke flow and evacuation in the road tunnel. Fire source are used about 30 MW and the turbulent flow characteristics are considered by standard k-epsilon turbulent model. The effect of transient thermal behavior and disaster prevention can be used for designing the road tunnel.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.970-973
• /
• 2006

The effects of the additional visual and auditory stimuli on the loudness evaluation of road traffic noise was investigated by the method of magnitude estimation. As a result, it was shown that additional visual stimulus of noise barrier can influence on the loudness perception of road traffic noise. Also, additional auditory stimuli such as green music or sound of flowing water can influence on the loudness perception of road traffic noise. approximately $5{\sim}10%$ lower than the absence of stimuli. But this effect was disappeared in the range of over 65dB(A).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.2
• /
• pp.193-197
• /
• 2012

Road traffic noise map is effective method to save cost and time for environmental noise assessment. Generally, noise is calculated by using theoretical equation of noise prediction, and the calculated result can be influenced by various input factors. Especially, domestic vehicle classification method for traffic flow and heavy vehicle percentage is different from that of foreign countries. Thus, this can cause effect on the noise prediction results. In this study, noise prediction results by using domestic vehicle classification method are compared with those by foreign methods.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.15-21
• /
• 2015

We proposed 50W-LED modules of using Heat-pipe and Stack-fin and produced LED modules was evaluated heat dissipation characteristics with comparison of the conventional die-casting type. It verified the application of products by applying it to 150W-LED road luminaires through simulation. The LED module was measures aimed design temperature of the Stack-fin and showed 26% upward heat dissipation effect than a conventional die-casting type. The luminous efficacy of 150W-LED road luminaires using this LED module reached over 112lm/W, and the simulation results showed average of horizontal luminance, overall luminance uniformity($U_O$) and lane luminance uniformity($U_I$) that is suitable for five-lane road with the KS standards.

• Journal of Plant Biology
• /
• v.15 no.3
• /
• pp.9-13
• /
• 1972

This report deals with lead and zinc contamination of roadside soil and plants caused by motor vehicles as a function of distance from the road edge. The concentrations of Pb and Zn in roadside soil and plant samples from several locations decrease regularly with increasing distance from traffic. Soil samples up to 24m distance from the road edge are contaminated with more than 12.99ppm lead, and 13.40ppm zinc. The decrease in Pb and Zn contamination with increasing distance from the road is characteristically curvilinear; the relative coefficiency of Pb and Zn with distance is -0.69, -0.48, respectively. The average contents of Pb and Zn in plants are 21.5ppm and 30.00ppm. It is suggested that the contamination is related to the composition of gasoline, motor oil and to roadside of the residues of this metals.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.4
• /
• pp.25-30
• /
• 2011

The jet fan is generally used to add thrust in the longitudinal ventilation system of road tunnel and the geometric conditions of jet fan such as the distance from tunnel wall have an effect on the performance of ventilation system. Numerical analyses on the flow in tunnel caused by operation of jet fan are presented to study the ventilation characteristics in tunnel. While the distance between jet fans in parallel installed in tunnel is changed 0.5 L/D to 3.0 L/D, the flowrate and mean velocity through tunnel are calculated for each cases. As the distance between jet fans increases, the flowrate through tunnel increases asymptotically and the momentum of tunnel flow is alike.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.4
• /
• pp.313-320
• /
• 2002

A 2-dimensional $k-{\varepsilon}$ numerical model was developed to explore the effects of vehicle movement, jet fan and wind speed for the ventilation of road tunnels. To consider the temperature distribution in the tunnel, the energy equation was solved with a source term of the energy exhausted from vehicles. Although the tunnel ventilation can be made by the piston effect of vehicle movement, an additional ventilation is necessary when a head wind is existing. Jet fans may assist the air flow in the tunnel. However, more efficient ventilation system should be necessary, because the exhaust gas from vehicles flow along the road surface and it cannot be diffused in the longitudinal tunnel.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.77-84
• /
• 2017

Recently, interest in safety has been increasing in every area, especially in the field of transportation. The accurate evaluation of the stability of road facilities is needed to improve the level of safety in the field of transportation and the application of new technologies is required to reduce the number of natural disasters. In this study, the wind data were compared and analyzed according to the type of measurement, and an evaluation of the stability of road signs using the wind data was conducted. In addition, a stability plan to secure road signs was elaborated and its effect on the wind load was analyzed. It was found that the wind data measured by a mobile atmospheric observing system (MAOS) was 2.43 times bigger than that measured by the Korea meteorological administration (KMA) and road weather information system (RWIS). In terms of their stability, the road signs were susceptible to failure caused by gusty winds and it was found necessary to ensure their stability. In the future, it will be possible to evaluate the stability of road facilities using road line weather data and the application of wind load reduction technologies is expected to improve road safety.

• Journal of Korean Society of Forest Science
• /
• v.87 no.2
• /
• pp.239-252
• /
• 1998

Based on forestry inventory data and various informations, this study was conducted to analyze the silvicultural activities by distance classes from forest road and to evaluate their effects in the area of Mt. Gari managed by Chunchon Regional Office of Northern Forest Management Office. The results were summarized as follows; 1) Most harvesting practice(67.9%) was done within 500m from forest roads, in the order of Pumgul, Saorang, and Kongkol forest road. And thinning practice was not related to the distance from forest road, produced $440.6m^3$, 35.7% of total thinning volume within 1,000m width along the forest roads. 2) Planting of 530,461 seedlings, 66.8% of total planting stock, in 176.9ha, 66.6% of total area within 1,000m from forest road, and supplementary planting of 46,243 seedlings was done in 15.4ha, 42.9% of total area within 500m from forest road. Areas and numbers of seedlings of two planting practices were in the order of Pumgul and Byungatur forest road. 3) Tending operation was done in 330.0ha, 60.3% of total area within 500m from forest road, and pre-commercial thinning was done in 693.6ha, 71.2% of total area. Areas of intermediate cutting practices were in the order of Pumgul, Korkol, and Saorang forest road.

• Journal of Arbitration Studies
• /
• v.30 no.3
• /
• pp.47-66
• /
• 2020

Due to the division of China's departmental laws, the disconnect between theory and practice, and the influence of traditional academic thinking on the understanding of the knowledge structure of arbitration legal talents in practice, the construction of law school colleges, teaching teams, and research centers mostly revolves around departmental laws, tearing the connection of the arbitration legal system. The student-centered, process-guaranteed, and result-oriented arbitration master of law training model is "virtualized," the shaping of arbitration professionalism is ignored, the coverage of practical teaching is narrowed, and the arbitration legal profession is mostly formalized. The prevalence of specialized curriculum systems shortage, single faculty, formalized practical teaching, outdated curriculum settings, unsuitable curriculum system design for development, and inaccurate professional curriculum standards and positioning renders it difficult to integrate the "Belt and Road." The cutting-edge, the latest research results, and practical experience cannot reflect the connotation, goals, and requirements of "Entrepreneurship" education, as well as arbitral issues such as the ineffective monitoring of practical education and the inconsistent evaluation of standards and scales. Under the background of the "Belt and Road," based on system theory and practice and through training goals that innovate and initiate organizational form, activity content, management characteristics, assessment and support conditions, etc., the arbitration law teaching curriculum system is gradually improved and integrated. Through the establishment of a "Belt and Road" arbitration case file database and other measures, a complete arbitration law theory and practice teaching guarantee system has been established. Third parties are introduced, arbitration law experimental modules are developed, students are guided how to discover new knowledge, new contents are mastered, solidarity, cooperation, and problem-solving capabilities are cultivated in the practice of the "Belt and Road," and quality education, vocational education, and innovation education are organically integrated. In order to implement the requirements of arbitration law education, innovation development and collaborative management of arbitration law teaching practice base should be cultivated, thus giving full play to the effect of collaborative education between universities and arbitration institutions.