• Korean Journal of Heritage: History & Science
• /
• v.46 no.4
• /
• pp.24-47
• /
• 2013

This study focused on the constructional concepts, landscape design techniques and changes made of the Sandan(山壇) area in the rear garden of Changdeokgung Palace based on the spatial organization of the zone. The results of this study are as below. Constructional layers that have been maintained throughout the centuries from King Injo(仁祖), King Sukjong(肅宗), King Sunjo(純祖), the Japanese colonial period to the present, were found in the Sandan area. The Sandan area, which was developed with the establishment of Chuiseungjeong(取勝亭) during the ruling of King Injo(仁祖), was created as a resting place for the King, and its usage continued until King Sukjong(肅宗) built Nakminjeong(樂民亭). However, the whole area was reorganized to host ritual ceremonies, where ancestral rites were performed for the mountain gods, after Sandan and Baekunsa(白雲社) were built during King Gojong's reign, before the drawing of 'Painting of Eastern Palaces(東闕圖).' The architectural component used then appears to have been designed to serve ancestral ritual formalities for the god of land, or to satisfy the religious desires of the royal family not fulfilled by Confucian courtesy. These are characteristics that define the Sandan area. Meanwhile, the analysis of the ground plan of the Changdeokgung Palace revealed that the Sandan had been maintained until the Japanese colonial era, but was removed sometime after liberation. The area underwent extensive reform in the early 1970s, when the whole area was developed into a tourist destination called Bingcheon(氷泉). Then, a new road that runs through Bingcheon was laid, and the present condition reflects the construction result of the time. An interview with a person who had taken part in the repair work in the 1970s confirmed that the construction work at the time had the goal of establishing two drainage systems for drinking water and copied the Okryuchon(玉流川) well.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.3
• /
• pp.100-113
• /
• 2012

In the midst of recent active excavation, lots of Silla(新羅) roof-end tiles are unearthed in Yeongnam area(嶺南地域). These are confirmed the same tile frame as the Silla tiles excavated in Gyeongju(慶州). It is represented by the Silla tiles excavated in Ingaksa Temple(麟角寺) excavation research. Roof-end tile with arabesque design(唐草文平瓦當) etc. including roof-end tile with lotus design(蓮花文圓瓦當) are judged to be the tile frame produced by the same frame of roof-end tile that was excavated in Gyeongju, Wolseong(月城) and Hwangyongsa Temple(皇龍寺址). There are three kinds of cases concerning the transportation of tile manufacture ; the roof-end tile manufactured in Gyeongju directly moved to each region, only tile frame moved to site to be manufactured there, and tile manufacturer moved to site to manufacture there. This article considers the case of the roof-end tile manufactured in Gyeongju that was directly moved to each region. In case of the Silla tiles excavated in region especially Ingaksa Temple, the aspects of tiles in accordance with different era show the repeated coexistence, expansion and maintenance. This situation is significant as a clue to understand the supply from Gyeongju not as temporary, but as continuous. On the other hand, if the Gyeongju tiles flowed directly into each region, and if the road was built of gravels and the means of transportation was cart, the damage from movement must never be prevented. On the contrary, transportation through waterway might be advantageous due to the reduction of labor and damage rate and the easiness of loading. Accordingly, it tells us why the ruins where roof-end tiles were excavated located near big and small rivers or streams. Of course there are some ruins located in a fixed distance, but the distance may be enough to endure the impact put on tiles from the overland movement. Therefore, in case of direct inflow form long distance, transportation must be finished by overland movement after waterway movement.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.212-235
• /
• 2010

The purpose of this study is to examine the characteristics of the location and the spatial composition of Uireung that is located in Seokgwan-dong, Seongbuk-gu, Seoul, in order to understand the landscape architectural characteristics. The results are as follows. First, Uireung is 6.4km from Changdeokgung Palace and 5.5km from Heunginjimun Gate. It did not violate the distance standard (40km) for the royal tombs according to Joseon Dynasty Neung-won Myo-je. Second, Uireung is in harmony with the nature and shows the authoritative characteristics of the royal authority through the spatial composition and rank(Entrance Area, Ceremonial Area, Burial Area). Third, there are burial mound, stone sheep, stone tiger, stone table, stone watch pillars in the upper platform, and stone civil official, stone horse, stone lantern in the middle platform, and stone military official, stone horse in the lower platform, and T-shape shrine, worship road in the ceremonial area. There is no pond and a tomb keeper residence, but the position, size, and form can be approximated through historical research materials. There are a colony of pine trees around the burial mound and 64 species of trees such as pine tree, zelcova tree, and fir tree below the burial mound.

• Korean Journal of Heritage: History & Science
• /
• v.45 no.4
• /
• pp.22-37
• /
• 2012

Storage facility of the pre-historic Korea is classified into the subterranean, ground and overground types. The rectangular-shaped subterranean Storage facilities have been identified in the Pungnaptoseong, the Gong mountain fortress site and the Gwanbukri site. Feature no. 196 at Gyeongdang District in Pungnaptoseong yielded a large quantity of glazed potteries, and a wooden storage at the Gwanbukri site contained a large amount of fruit seeds. These storage facilities might be functioned as the warehouse for the highest group rather than the storage for the emergency such as war and flooding and stipend of government officials. This article subdivided into "state storage" on the concept of the former that "royal storage" on the concept of the latter. If it look on the state storage at large, this include the royal storage too. But it subdivided to help article understand because Baekjae changed from state storage to royal storage by change and specialization of system after 4th. The reason why the diversification of storage pits was closely related to the unification of local polities and the concentration of political power in the state-level. Therefore, it might reflect the political circumstances the ruling elites attempted to heighten their authority in terms of the organizing tax collecting system. And divided the time of storage is confirmed separative storage pits in the suburbs of capital city. There is hight probability of top local polities or nation that have possessional a role. This is to cover on frequent war in the Three States. On the other hand, state storage is located around ancent road that linked castle gate that is divided into center and periphery depending on function and position of storage. Center is located royal storage focusing in the presumed royal palace that periphery is located state storage to provide service to the public. It is presumed that located with the government office.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.204-210
• /
• 2019

In case of a fire inside a tunnel, unlike ordinary roads, it is very difficult for a driver to obtain visibility, and a large accident is highly likely to occur. In this study, the smoke behavior, visible distance, and CO concentration of a jet fan were analyzed using the NIST fire simulation (FDS). All analyses were set to HRRPUA (Heat Release Rate Per Area) 3.6MW/m and all the analysis times were set to 600s. In all analyses by CFD, the results were confirmed at y=30m and y=110m, and smoke behavior analysis, visible range analysis, and carbon monoxide concentration were confirmed according to the diameter and flow rate. As the size and flow rate of the jet fan increased, the visibility distance was high at y=30m, and the concentration of carbon monoxide was also confirmed to be 0 ppm. Therefore, proper setting of the jet fan diameter and flow rate will be an excellent solution for fires in tunnels, and taking refuge at upstream area of a re-ventilated fan can reduce the number of casualties.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.5
• /
• pp.621-640
• /
• 2019

Quantitative stability assessment of underground cavities can be presented as a factor of safety based on the Shear Strength Reduction Method (SSRM). Also, SSRM is one of the stability evaluation methods commonly used in slope stability analysis. However, there is a lack of research that considers the relationship between the probability of occurrence of cavities in the ground and the potential failure surface of the slope at the same time. In this study, the effect of small underground cavities on the failure behavior of the slope was analyzed by using SSRM. Considering some of the glaciology studies, there is a case that suggests that there is a cavity effect inside the glacier in the condition that the glacier slides. In this study, the stability evaluation of underground cavities and slope stability analysis, where SSRM is used in geotechnical engineering field, was carried out considering simultaneous conditions. The slope stability analysis according to the shape and position change of underground cavities which are likely to occur in the lower part of a mountain road was analyzed by using SSRM in FLAC3D software and the influence of underground cavities on the slope factor of safety was confirmed. If there are underground cavities near slope potential failure surface, it will affect the calculation of a factor of safety. The results of this study are expected to be basic data on slope stability analysis with small underground cavities.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.345-349
• /
• 2019

In Korea, the mountainous area occupies more than 70% of the whole country, cutting of earth slope that cuts a part of the ground surface is widely used when building infrastructures such as road, railroad, and industrial complex construction. In recent years, regulations on environmental damage have become more strict, and various methods have been developed and applied. Among them, Concrete-Panel Retaining Wall technique is actively applied. Concrete-Panel Retaining Wall is a method to resist horizontal earth pressure by forming a wall by attaching a precast retaining wall to the front of the support material and increasing the shear strength of the disk through reinforcement of the support material. Soil nailing, earth bolt, and ground anchor are used as support material. Among them, ground anchor is a more aggressive reinforcement type that introduces tensile load in advance to the steel wire, and a large concentrated load acts on the front panel. This concentrated load is a factor that creates cracks in the concrete panel and reduces the durability of the retaining wall itself. In this study, steel pipe sleeves and reinforcements were purchased at the anchorage of the panel to prevent cracks, and by applying bumpy shear keys to the end of the panel, the weakness of the individual behavior of the existing grout anchors was improved. The problem of degraded landscape by exposure to front concrete of retaining wall and protrusion of anchorage was solved by the production of natural stone patterns and the construction of sections that do not protrude the anchorage. In order to verify the effectiveness of anti-crack sleeves and reinforcements used in the null, indoor testing and three-dimensional numerical analysis have been performed, and the use of steel pipe sleeves and reinforcements has demonstrated the overall strength increase and crack suppression effect of panels.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.108-127
• /
• 2014

Gangwha was a capital city of Goryeo, in spite of short-term occupation, where various national facilities such as palace stood in a row. Nevertheless, its historic importance has been undervalued owing to undiscovered palace. According to ${\ll}Goryeosa{\gg}$, palace in Gangwha was built in imitation of that of Gaegyeong. If it is true, the site of the old palace in Gaeseong as an original could give significant information for that of Gangwha. The distinct feature of Gaegyeong is that the palace was located in the west area of the centerline from north to south and pond lay in the east side. There is a mountain in the center of capital and two rivers runs along side the mountain. Gunggol at Gwancheong-ri is a best place where structural peculiarities of Gaegyeong can be applicable to Gangwha. There is an area of celadon distribution and is some topographic similarities such as central mountain, two rivers are quite similar. It is assumable that excavation result of no. 405 Gwancheongri reflects the function of east pond and thoroughfare responds to main street from north to south of Gaegyeong. After all the analysis from archaeological information, old maps, cadastral maps, topographic similarities and so on, Gunggol at Gwancheong-ri within an arc shape road is a most suitable place as palace in Gangwha.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.3
• /
• pp.204-219
• /
• 2015

International society, including the United Nations, has recently been making efforts to further promote a rapprochement of cultures in relation to alleviating military and political conflicts and other social clashes. In line with these efforts at the international level, there has been a growing interest on Central Asia and, in particular, on the Silk Road, which functioned as a trade route among ancient civilizations in the region and is also seen as a route that promoted cultural dialogue and exchanges. Given the amount of cross cultural dialogue and exchange, it is no surprise that intangible cultural heritage has historically been abundant and easily found in the region. However, this heritage was placed in considerable risk because heritage transmission critically weakened for seventy years under Soviet rule. Fortunately, since independence, there has been increasing interest in restoring community identity and reviving intangible heritage. Nevertheless, in spite of this interest, a lack of policies and cultural support in each country has made heritage safeguarding difficult. In this paper, I analyze the various phenomena that took place after the concept and international trends on ICH were introduced and speak about the experiences and outcomes obtained from collaborative network projects by ICHCAP and the Central Asian countries over the last six year. In addition, I would like take this opportunity to discuss how we can understand and develop collaboration in the intangible heritage field in Central Asia in a long-term perspective.

• Journal of Korea Port Economic Association
• /
• v.35 no.2
• /
• pp.77-92
• /
• 2019

As China's economic growth pole has shifted from the coastal area to the Midwest and the inland since the beginning of 2000, construction of China's inland ports was promoted in the coastal area. The inland port functions as offshore port, thereby streamlining import and export logistics and customs clearance and so on. The purpose of this study is to identify the competitiveness and potential of China's inland ports via functional and geographical classification, as well as SWOT-PEST analysis. According to the results of the study, inland ports can be functionally categorized as sea port-based, industrial-based, distribution-based and customs clearance-based. The majority of the sea port-based inland ports are located in the eastern part of China while industry-based and distribution-based inland ports are situated in the Midwest. On contrast, the inland ports in Northwest mainly perform the function of customs clearance to promote international trade with neighbouring countries. The inland ports in the eastern region have high competitiveness owing to a large volume of international trade in the region, whereas those in the Midwest have high potential. The 'One Belt to One Road' initiative proposed by the Xi's Government is expected to play a significant role in promoting the development of inland ports in the Midwest and border areas.