• 멤브레인
• /
• 제14권3호
• /
• pp.230-239
• /
• 2004

폴리아미드 역삼투막을 이용하여 염색폐수를 처리하였다. 염색폐수를 멤브레인 공정에 적용하기 전에 알럼, 페릭 클로라이드, HOC-100와 같은 화학응집제를 이용하여 먼저 처리하였다. 이러한 전처리가 분리막에 의한 폐수처리 공정에 어떠한 영향을 주는지 알아보기 위하여 최적의 응집/침전 조건을 찾았다. 사용된 모든 응집제에 있어서, 전처리된 폐수의 COD와 UV-흡수도는 약 70% 정도의 감소를 보였다. 이렇게 전처리된 폐수를 다시 분리막 공정으로 처리하였다. 전처리 시 사용된 응집제들이 분리막 공정에서 어떻게 분리막 오염에 영향을 주는지를 조사하였으며, 그 결과 HOC-100가 폐수 내에 존재하는, 분리막 오염을 유발하는 물질 제거에 가장 좋은 효과를 나타내는 것을 알 수 있었다.

• 상하수도학회지
• /
• 제30권3호
• /
• pp.279-284
• /
• 2016

Membrane distillation (MD) is the thermally driven water separation process based on the vapor pressure difference across the membrane. In order to increase the water recovery of the conventional RO process, the additional MD-PRO pocess was suggested. In this study, the syntheric RO brine was used as a feed solution of the MD process. Due to the high salinity of the RO brine, the MD membrane could be fouled by the scalants. In order to mitigate the scaling on the MD membrane surface, the pre-treatment process using the column filled by natural zeolite was applied. The roughing filter was installed between the pre-treatment process and MD system in order to prevent possible particulate fouling by the debries of the natural zeolite. Moreover, in order to enhance the CEC of the natural zeolite, the NaCl soaking was conducted. The flux and electronic conductivity were monitored under given experimental conditions. And the membrane morphology and the chemical compositions were analyzed by using the SEM-EDX.

• 멤브레인
• /
• 제32권4호
• /
• pp.209-217
• /
• 2022

이온교환막(IEM)은 다양한 종류의 단가이온과 다가이온을 분리하기 위해 사용되는 막의 한 종류로, 배터리, 연료전지, 염화물-알칼리 공정 등에 사용된다. 이온교환막을 통한 막분리는 전기 구동력을 기반으로 한 녹색 분리 방식이며, 해수 담수화와 수처리 분야에서 떠오르는 방식이다. 전기투석(ED)은 양이온과 음이온이 이온교환막을 따라 선택적으로 이동하는 기술이다. 음이온 교환막(AEM)은 전기투석의 중요한 구성 요소 중 하나이며, 공정 효율을 향상시키는 데 상당한 역할을 한다. 이온교환막에 가교결합을 도입하면 자유 부피의 감소로 인해 이온 선택 분리 성능이 향상된다. 역삼투(RO) 공정을 통한 해수 담수화 시 RO 농축수에 용해된 염이 다량 존재한다. 따라서 1가 양이온 선택막으로 구성된 전기투석 공정은 오염을 줄이고 막 플럭스를 개선한다. 이 검토는 전기투석, 음이온 교환막, 그리고 양이온 교환막의 세 부분으로 나뉜다.

• 상하수도학회지
• /
• 제31권4호
• /
• pp.303-310
• /
• 2017

Pressure retarded osmosis(PRO) has attracted much attention as potential technology to reduce the overall energy consumption for reverse osmosis(RO) desalination. The RO/PRO hybrid process is considered as the most logical next step for future desalination. The PRO process aims to harness the osmotic energy difference of two aqueous solutions separated by a semipermeable membrane. By using the concentrated water(RO brine) discharged from existing RO plants, the PRO process can effectively exploit a greater salinity gradient to reduce the energy cost of processing concentrated water. However, in order to use RO brine as the draw solution, PRO membrane must have high water flux and enough mechanical strength to withstand the high operational pressure. This study investigates the development of a thin film composite PRO membrane and spiral wound module for high power density. Also, the influence of membrane backing layer on the overall power density was studied using the characteristic factors of PRO membranes. Finally, the performance test of an 8-inch spiral wound module was carried out under various operating conditions(i.e. hydraulic pressure, flow rate, temperature). As the flow rate and temperature increased under the same hydraulic pressure, the PRO performance increased due to the growth of water permeability coefficient and osmotic pressure. For a high performance PRO system, in order to optimize the operating conditions, it is highly recommended that the flow pressure be minimized while the flow rate is maintained at a high level.

• 대한환경공학회지
• /
• 제35권3호
• /
• pp.200-205
• /
• 2013

전처리 공정은 막의 오염 정도를 제어할 수 있는 유일한 방법이다. 막의 오염 현상은 피할 수 없는 중요한 문제이며 RO 공급수로 적합한 전처리 공정의 선택이 중요하다. 본 연구는 pH, 해수의 탁도, 수온, 응집제 주입량 그리고 SDI 측정 막재질과 같은 SDI 값에 영향을 미치는 인자들을 평가 하기위해 수행되었다. 그 결과 해수의 탁도는 여과수의 SDI 값에 약간의 영향을 미친것으로 조사되었다. 0.45 um 공극 크기를 가지는 SDI 측정 막은 소수성 막 보다 동일한 재질의 친수성 막을 이용하는 것이 분석 결과의 신뢰성과 재현성을 확보할 수 있었다. pH 7.0 이하의 조건에서 pH가 감소할수록 SDI 값은 증가한 것으로 나타났다. 그리고 수온은 SDI 값은 큰 영향을 미친것으로 조사되었다.

• 상하수도학회지
• /
• 제24권1호
• /
• pp.93-101
• /
• 2010

Reverse osmosis (RO) membranes have been widely used for desalination as well as water and wastewater treatment facilities. Cleaning process is important to maintain stable operation as well as prevention of membrane fouling. Purpose of this research is to analyze electrostatistic and chemical characteristics after cleaning of RO membrane against $SiO_2$ scale. Four RO membranes of polyamide are used and examined about effect of chemical cleaning. EDTA (ethylene diamine tetraacetic acid) and SDS (sodium dodecil sulfate) and NaOH are applied for cleaning process after operation in synthetic water. Then, cleaning was performed with chemicals such concentration as 6hr, 12hr and 24hr, respectively. As a result, transmittances of FT-IR of four membranes are compared at each cleaning concentration. Ta/Tv shows difference of chemical composition between new membrane and cleaning membrane after cleaning. Type B of RO membrane is turned out to be most vulnerable to cleaning among four membranes. In terms of zeta potential, new membrane has -16 mV to +6 mV on pH while scaled membrane has -18 mV to 2 mV. However, it changed -23mV to 0.9 mV after cleaning. In comparison with existing salt rejection of RO membranes after cleaning, the rejection of the membranes goes down 0.7% maximum. Though cleaning changes the characteristics of membrane surface, it does not greatly affect salt rejection. pH is a critical factor to flux change in PA (polyamide) membrane.

• 환경영향평가
• /
• 제21권5호
• /
• pp.707-713
• /
• 2012

There are a lot of parameters affecting microbial acclimation/cultivation characteristics such as dynamic conditions, F/M ratio and substrate affinity. From the process control point of view, the effect of high salinity on the removal efficiencies of BOD and SS have been documented by few researchers. In this research, lab-scale CAS(Conventional Activated Sludge) process and modified $A_2O$(Anaerobic/Anoxic/Oxic) process were operated and monitored to evaluate the characteristics of microbial acclimation and cultivation under high salinity wastewater during the period of three weeks. As a result of acute microbial activity test(6hr) at various $Cl^-$ concentration, the appropriate $Cl^-$ concentration for microbial growth and acclimation ranged under 3,100 mg/l. As a result of acclimation/cultivation test, the trend of COD removal efficiency reduced gradually as time elapsed. It is considered that $NH_4$-N removal phenomenon of the conventional pollutants removal mechanisms gave little effect to the microbial acclimation/cultivation under high salinity wastewater.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.380-392
• /
• 2018

The importance of polysaccharides is increasing globally due to their role as a significant source of dietary prebiotics in the human diet. In the present study, in order to maximize the yield of crude polysaccharides from Pinus densiflora, response surface methodology (RSM) was used to optimize a two-stage extraction process consisting of steam explosion and water extraction. Three independent main variables, namely, the severity factor (Ro) for the steam explosion process, the water extraction temperature ($^{\circ}C$), and the ratio of water to raw material (v/w), were studied with respect to prebiotic sugar content. A Box-Behnken design was created on the basis of the results of these single-factor tests. The experimental data were fitted to a second-order polynomial equation for multiple regression analysis and examined using the appropriate statistical methods. The data showed that both the severity factor (Ro) and the ratio of water to material (v/w) had significant effects on the prebiotic sugar content. The optimal conditions for the two-stage process were as follows: a severity factor (Ro) of 3.86, a water extraction temperature of $89.66^{\circ}C$, and a ratio of water to material (v/w) of 39.20. Under these conditions, the prebiotic sugar content in the extract was 332.45 mg/g.

• 통상정보연구
• /
• 제9권2호
• /
• pp.205-230
• /
• 2007

In modern manufacturing practice it is sometimes necessary to send products to another country for special processing which cannot be performed inside the territory of the zone and Outward Processing(OP) covers such situation. What's more, process and Rules of Origin(RoO) of OP is implicated in Korea' Free Trade Agreement(Korea-Singapore, Korea-EFTA and Korea-Asean FTA) because of the goods to be producted in Kaesong Industrial Complex. Thus, In this paper analyse a implication of OP's process and RoO focused on the two fold : (1) provide an overview of the objectives, types, effects of Outward Processing described in customs law and FTA provisions of EU and Korea; (2) present a comparative analysis of EU and Korean rules; (3) offer an appropriate proposal to Korea-EU FTA negotiation.

• 한국농공학회지
• /
• 제57권4호
• /
• pp.16-24
• /
• 2015

Desalination technology is a process to remove salt from water. There are three classified In accordance with the concentration of salt The concentration of sea water 15,000~50,000mg/l, brackish water 1,500~15,000mg/l, desalination less than 500mg/l.. In general, salt to remove for using a pre-treatment UF filter, but this study is new pre-treatment technology RO Membrane process technology Suspended particulate matter is said most were treated at the pre-treatment equipment, wheat affluent particulate material was removed from the MF filter. Influent SS 16.2mg /l The treatment was effective in treatment 0.05mg /l of 99% is removed. COD is reduced to 60% in the pre-treatment device, after treatment was reduced to 30% RO membrane. Influent COD 10.2mg/l treatment was removed 1.9mg/l. The removal rate is 81.9%. Desalination removes the ionic substances in the RO Membrane. Influent EC $978.8{\mu}s/cm$ and treatment showed a result of $18.7{\mu}s/cm$.