• 대한환경공학회지
• /
• 제30권4호
• /
• pp.453-458
• /
• 2008

본 연구는 생활하수 최종처리수의 색도, 잔류 유기물질 제거 및 소독에 관한 연구를 Nb/Pt Anode 전극으로 구성된 전기분해장치를 이용하여 수행하였다. RNO는 OH$\cdot$에 의하여 빠르게 탈색시키며, 전류세기 5 A, 10 A, 15 A에서 RNO의 2차 분해속도는 각각 $\frac{0.223l}{mg{\cdot}min}$, $\frac{1.679l}{mg{\cdot}min}$, $\frac{2.322l}{mg{\cdot}min}$로 96% 이상의 r$^2$ 조사되었다. 회분식 전기분해장치에서 전류세기 15 A와 초기 pH 5, 7.5, 9일 때 15분 후 COD$_{Mn}$ 농도는 4 mg/L 미만, 색도는 5도 미만, 일반세균은 불검출로 먹는물 수질 기준값으로 조사되었다. 전기분해 연속 시스템의 HRT 3.7$\sim$49.2분에서 유리염소는 0.2$\sim$0.7 mg/L, 일반세균은 불검출, 색도는 5도 미만과 THMs는 0.017 mg/L이다. 그러므로 Nb/Pt anode 전기분해 공정은 소독뿐만 아니라 생물학적 처리수의 재이용 기술로 적용될 수 있다.

• KSBB Journal
• /
• 제25권1호
• /
• pp.33-40
• /
• 2010

Conventional disinfectants and disinfection method are expensive, hazardous and often require long periods of exposure. Recently, there is growing interest in complex disinfection process as a disinfection technique in medical instruments such as endoscope, hand piece bur to improve the disinfection efficiency and conveniency. The aim of this study was to evaluate the performance of a new complex process for the purpose of disinfection of Escherichia coli in water. Three single process (electrolysis, UV and ultrasonic process) was combined dual and triple disinfection process. The order of disinfection performance for E. coli in dual process lie in: Electrolysis + UV > Electrolysis + Ultrasonic > UV + Ultrasonic process. Disinfection efficiency of E. coli and degradation of N, N-Dimethyl-4-nitrosoaniline (RNO, indicating material of OH radical formation) of dual process was higher than that of the triple process (Electrolysis + UV + Ultrasonic process). In electrolysis + UV process, disinfection tendency was well agreed with RNO degradation tendency.

• 한국물환경학회지
• /
• 제27권5호
• /
• pp.617-624
• /
• 2011

In order to confirm the creation of the OH radical which influences to RNO bleaching processes, it experimented using laboratory reactor of dielectric barrier discharge plasma (DBDP). The experiments performed in about 4 kind process variables (diameter of ground electrode, diameter of discharge electrode, diameter of quartz tube and effect of air flow rate) which influence to process. In order to examine optimum conditions of design factors as shown in Box-Behnken experiment design, ANOVA analysis was conducted against four factors. The actual RNO removal at optimized conditions under real design constraints were obtained, confirming Box-Behnken results. Optimized conditions under real design constraints were obtained for the highest desirability at 1, 1 mm diameter of ground and discharge electrode, 6 mm diameter of quartz tube and 5.05 L/min air flow rate, respectively.

• 한국환경과학회지
• /
• 제20권9호
• /
• pp.1115-1124
• /
• 2011

There is an increasing incidence in health problems related to environmental issues that originate from inadequate treatment of sewage. This has compelled scientists to engage in innovative technologies to achieve a effective disinfection process. Electrolysis has emerged as one of the more feasible alternatives to conventional disinfection process. The objectives of the present paper were to investigate the effect of chemical characteristics on oxidant formation and Escherichia coli (E. coli) disinfection in synthetic sewage effluents. The influence of parameters such as COD, SS, T-N and T-P were investigated using laboratory scale batch reactor. The results showed that the higher COD, T-N and T-P concentration, the lower N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) degradation and E. coli disinfection was observed. The order of effect of RNO degradation and E. coli disinfection was T-P > COD > T-N > SS. When 4 parameter of water quality were worked simultaneously, oxidants formation and disinfection was decreased with increase of the concentration of sewage. To increase of the disinfection performance, the increase of disinfection time or electric power was need.

• 대한환경공학회지
• /
• 제38권12호
• /
• pp.647-655
• /
• 2016

Lead dioxide ($PbO_2$)는 전기화학적 고도산화공정(electrochemical advanced oxidation process, EAOP)에서 hydroxyl radical ($^{\bullet}OH$) 발생에 기반한 유기오염물 분해에 효과적인 전극물질이다. $PbO_2$ 전극의 대표적인 제조방법인 전기화학적 증착법(electrodeposition)의 주요 인자로는 전류/전압세기, 온도, 반응시간, Pb(II)의 농도, 전해질 종류 및 농도가 있다. 본 연구에서는 $Ti/PbO_2$ 산화전극을 전기화학적 증착법을 통해 전류인가 시간, 전류밀도, 온도, $HNO_3$ 전해질 농도를 각각 조절하여 제조하였고, $^{\bullet}OH$ 검출물질인 p-Nitrosodimethylaniline (RNO)의 전기화학적 탈색 측면에서 $^{\bullet}OH$ 발생에 대한 $PbO_2$ 증착인자의 영향을 조사하였다. 주요 결과로, $PbO_2$의 $^{\bullet}OH$ 발생 성능은 $PbO_2$ 증착과정에서 대체로 전류인가 시간이 길어질수록(1-90 min), 전류밀도가 감소할수록($0.5-50mA/cm^2$), 증착온도가 증가할수록($5-65^{\circ}C$), $HNO_3$ 전해질 농도(0.01-1.0 M)가 감소할수록 향상되었다. 특히, 0.01 M의 낮은 $HNO_3$ 농도 상에서 $20mA/cm^2$ 전류를 10분 이상 인가하여 증착시킨 $PbO_2$에서$^{\bullet}OH$ 발생이 가장 촉진되었다. RNO 탈색속도 측면에서 가장 성능이 좋은 $PbO_2$와 저조한 $PbO_2$ 사이에 최대 41% 정도 차이가 나타났다. $PbO_2$의$^{\bullet}OH$ 발생 성능을 결정짓는 특성으로 $PbO_2$ 층 전도도, Ti 기판 산화, $PbO_2$ 결정크기를 고려한 결과, $PbO_2$ 층의 전도도 및 Ti 기판의 산화가 $^{\bullet}OH$ 발생에 주요하게 영향을 미치는 것으로 확인되었다. $PbO_2$ 층의 전도도 향상과 Ti 표면 산화 억제로 인한 $Ti/PbO_2$ 계면에서 전도도 향상이 $^{\bullet}OH$ 발생을 촉진시키는 효과를 가져왔다. 그리고 일부 전극에서는 표면에서 $PbO_2$ 결정 크기 증가가 $^{\bullet}OH$ 발생을 저감시키는 역할을 하였다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 1995년도 춘계 학술대회지
• /
• pp.96-97
• /
• 1995

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1175-1182
• /
• 2014

In this study, we examined the effect of cathode from electrolysis reactor for treating ballast water. We are going to select a suitable cathode for seawater electrolysis after considering the effect on the generation of the oxidant of cathode and the electrode deposition materials adhering to the surface of cathode. Anode is Ru-Ti-Pd electrode and cathode are Ti, Pt, JP520 (Ni-Pt-Ce) electrodes. Using the cathode of the three types, experiments were conducted to examine the effects of TRO (total residual oxidants) generation concentration and RNO (N, N-Dimethyl-4-nitrosoaniline, indicator of the generation of OH radical) degradation concentration (in 1, 35 psu), ohmic drop, FESEM(field emission scanning electron microscope) observation of cathode surface and EDX (energy dispersive X-ray spectroscopy) measurements of attached fouling material. The results showed that TRO generation concentration and RNO degradation concentration in according to each type of cathode are not different. The attached fouling materials were observed on the surface of Ti and the JP520 electrode by the observation of SEM after electrolysis for two hours, but it was not observed on the surface of Pt electrode. When considering the surface ohmic drop of cathode and the attached fouling materials, Pt electrode was judged as the excellent cathode.

• 한국환경과학회지
• /
• 제28권3호
• /
• pp.291-301
• /
• 2019

This study was conducted to investigate the effect of salt concentration and turbidity on the inactivation of Artemia sp. by electrolysis, UV photolysis, electrolysis+UV process to treat ballast water in the presence of brackish water or muddy water caused by rainfall. The inactivation at different salt concentrations (30 g/L and 3 g/L) and turbidity levels (0, 156, 779 NTU) was compared. A decrease in salt concentration reduced RNO (OH radical generation index) degradation and TRO (Total Residual Oxidant) production, indicating that a longer electrolysis time is required to achieve a 100% inactivation rate in electrolysis process. In the UV process, the higher turbidity results in lower UV transmittance and lower inactivation efficiency of Artemia sp. Higher the turbidity resulted in lower ultraviolet transmittance in the UV process and lower inactivation efficiency of Artemia sp. A UV exposure time of over 30 seconds was required for 100% inactivation. Factors affecting inactivation efficiency of Artemia sp. in low salt concentration are in the order: electrolysis+UV > electrolysis > UV process. In the case of electrolysis+UV process, TRO is lower than the electrolysis process, but RNO is more decomposed, indicating that the OH radical has a greater effect on the inactivation effect. In low salt concentrations and high turbidity conditions, factors affecting Artemia sp. inactivation were in the order electrolysis > electrolysis+UV > UV process. When the salt concentration is low and the turbidity is high, the electrolysis process is affected by the salt concentration and the UV process is affected by turbidity. Therefore, the synergy due to the combination of the electrolysis process and the UV process was small, and the inactivation was lower than that of the single electrolysis process only affected by the salt concentration.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1999년도 춘계종합학술대회
• /
• pp.411-414
• /
• 1999

70 ${\AA}$-thick oxides nitridied at various conditions were reoxidized at pemperatures of 900$^{\circ}C$ in dry-O$_2$ ambients for 5～40 mininutes. The gate oxide interface porperties as well as the oxide substrate interface properties of MOS(Metal Oxide Semiconductor) capacitors with various nitridation conditions, reoxidation conditions and pure oxidation condition were investigated. We stuided I$\sub$g/-V$\sub$g/ characteristics, $\Delta$V$\sub$g/ shift under constant current stress from electrical characteristics point of view and breakdown voltage from leakage current point of view of MOS capacitors with SiO$_2$, NO, RNO dielectrics. Overall, our experimental results show that reoxidized nitrided oxides show inproved charge trapping porperites, I$\sub$g/-V$\sub$g/ characteristics and gate $\Delta$V$\sub$g/ shift. It has also been shown that reoxidized nitridied oxide's leakage currented voltage is better than pure oxide's or nitrided oxide's from leakage current(1${\mu}$A) point of view.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.210-213
• /
• 2005

This article describes an estimate method of the spark plug gap by measuring breakdown voltage. Breakdown voltage is the function of spark plug gap, pressure, temperature and humidify. However. It is dominated mainly by the spark plug gap. This technique is applied to in-line process test of the spark plug gap in automobile engine production. Breakdown voltage of normal spark plugs slightly scatters in ordinary conditions and if there is dust or burr in the gap, breakdown voltage gets lower. This technique saves repairing time for bad spark plug and attributes to improve the quality of automobile engine.