• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.673-678
• /
• 2005

The objective of this paper is to develop the microorganism concentration simulation model for the health related effect analysis while farmers and water managers reuse the wastewater for agricultural irrigation. This model consists of the CE-QUAL-R1 model and the CREAMS-PADDY model. The CE-QUAL-R1 model is the 1-D numerical model to analyze the water quality of the reservoir and the CREAMS-PADDY model is modified from CREAMS model for considering the hydrologic cycles in paddy field. This model was applied to examine the application by the observed data from 2003 in Byoungjum study area. From this research, the average root mean square error (RMSE) for the simulated concentration during the calibration period was 0.51 MPN/100ml and correlation coefficient $(R^2)$ was 0.71. And the RMSE for the simulated concentration during the verification period was 0.46 MPN/100ml and $R^2$ was 0.73. This simulation results show that the coliform inflow concentrations by the wastewater irrigation wield great influence upon the temporal coliform concentrations in paddy field.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2009년도 춘계학술대회 논문집
• /
• pp.254-259
• /
• 2009

In this study, Simplified Method for the Atmospheric Correction (SMAC) radiative transfer model (RTM) used to retrieve surface reflectance from MODIS Top Of Atmosphere (TOA) reflectance (MOD02). SMAC code provides coefficients which were previously yielded by Second Simulation of the Satellite Signal in the Solar Spectrum (6S) for each satellite sensor. We conducted error analysis of SMAC RTM using MOD02 over comparison with MODIS surface reflectance (MOD09) which was provided from 6S. It showed that low accuracy values such as, $R^2$ : 0.6196, Root Means Square Error (RMSE) : 0.00031, bias : - 0.0859. Thus sensitivity analysis of input parameters and coefficients was conducted to searching error sources. Coefficients about $\tau_p$ (average AOD) are more influence than any other coefficients of $\tau_{a550}$ (Aerosol Optical Depth at 550nm) from sensitivity test. Calibrated coefficients of $\tau_p$ from regression analysis were used to surface reflectance which showed that improve accuracy of surface reflectance ($R^2$ : 0.827, RMSE : 0.00672, bias : - 0.000762).

• 농촌계획
• /
• 제20권2호
• /
• pp.103-114
• /
• 2014

The objective of this study was to develop agricultural reservoir water supply simulation system to assess water cycle of agricultural water district. Developed system was named as ARWS (Agricultural Reservoir Water supply simulation System). ARWS consists of platform and independent modules. In ARWS, reservoir inflow was calculated using Tank model, and agricultural water supply was calculated considering current farming period and mid-summer drainage. ARWS was applied to simulate water level of Gopung and Tapjung reservoir in 2011 - 2012. The results were compared to simulation results of HOMWRS and observed data. Average $R^2$, EI, RMSE of ARWS were 0.76, 0.46, 1.78 (m), average $R^2$, EI, RMSE of HOMRWS were 0.88, -0.14, 2.37 (m) respectively. Considering statistical variances, water level simulation results of ARWS were more similar to observed data than HOMWRS. ARWS can be useful to estimate reservoir water supply and assess hydrological processes of agricultural water district.

• 한국음향학회지
• /
• 제22권3호
• /
• pp.224-232
• /
• 2003

본 논문에서는 능동 소나의 구성 방법 및 관측 오차에 따른 위치 추정 성능에 대해서 다룬다. 능동 소나는 구성 방법에 따라서 크게 단상태 (Monostatic) 소나, 양상태 (Bistatic) 소나, 다중상태 (Multistatic) 소나로 분류될 수 있으며, 각각의 오차에 대한 특성이 서로 다르다 각 수신기가 거리 정보와 방위 정보를 얻을 수 있다는 가정하에 단상태, 양상태 소나와 다중상태 소나의 위치 추정 성능에 대해 비교해 보고 기존의 정보 융합 방법인 최소 자승법 (LS: Least square)에 가중치를 주는 가중치 최소 지승법 (WLS: Weighted least square)을 제안하였다. 또한, 제안된 방법을 이용하여 수신기의 수, 송수신기간 거리와 위치 추정 성능과의 연관성에 대하여 알아보고 효과적인 다중상태 소나 배치에 대한 연구를 수행하였다. 모의 실험결과 다중상태 소나의 위치 추정 제곱근 오차평균이 단상태 소나에 비해 약 35.98%, 양상태 소나에 비해 약 37.45% 우수한 것을 볼 수 있었으며 WLS가 LS에 비해 평균 7.4% 우수한 성능을 나타내었고 각 센서에 입력되는 정보의 분산 차가 클수록 성능 향상율이 증가하는 경향을 보였다.

• 디지털융복합연구
• /
• 제19권9호
• /
• pp.257-269
• /
• 2021

논문은 심탄도(BCG, Ballistocardiogram) 센서를 이용하여 생체신호 데이터를 비침습, 무구속적인 방식으로 수집하고, ICT 기술과 고성능 컴퓨팅 환경에서 인공지능 기계학습 알고리즘을 활용하여 데이터 기반 혈당 예측 알고리즘 모델 개발 및 검증하는 방법을 제시하고 연구하는 것이다. 혈당수치 예측모델은 MLP 아키텍처에 입력노드는 심박수, 호흡수, 심박출량, 심박변이도, SDNN, RMSSD, PNN50, 나이, 성별이며, 은닉층 7개를 사용하였다. 실험 결과는 5회 실험한 학습데이터의 평균 MSE, MAE 및 RMSE 값은 각각 0.5226, 0.6328 및 0.7692이며 검증데이터 평균 값은 각각 0.5408, 0.6776, 0.7968이었으며, 결정계수(R2) 수치는 0.9997의 결과를 보였다. 데이터를 기반으로 한 혈당수치를 예측하는 모델을 표준화하고 데이터셋 수집과 예측 정확성을 검증하는 연구가 계속적으로 진행된다면 비침습 방식의 혈당 수준 관리에 활용될 수 있을 것으로 사료된다.

• Geomechanics and Engineering
• /
• 제36권3호
• /
• pp.259-276
• /
• 2024

The undrained shear strength is widely acknowledged as a fundamental mechanical property of soil and is considered a critical engineering parameter. In recent years, researchers have employed various methodologies to evaluate the shear strength of soil under undrained conditions. These methods encompass both numerical analyses and empirical techniques, such as the cone penetration test (CPT), to gain insights into the properties and behavior of soil. However, several of these methods rely on correlation assumptions, which can lead to inconsistent accuracy and precision. The study involved the development of innovative methods using extreme gradient boosting (XGB) to predict the pile set-up component "A" based on two distinct data sets. The first data set includes average modified cone point bearing capacity (q_t), average wall friction (f_s), and effective vertical stress (σ_vo), while the second data set comprises plasticity index (PI), soil undrained shear cohesion (S_u), and the over consolidation ratio (OCR). These data sets were utilized to develop XGBoost-based methods for predicting the pile set-up component "A". To optimize the internal hyperparameters of the XGBoost model, four optimization algorithms were employed: Particle Swarm Optimization (PSO), Social Spider Optimization (SSO), Arithmetic Optimization Algorithm (AOA), and Sine Cosine Optimization Algorithm (SCOA). The results from the first data set indicate that the XGBoost model optimized using the Arithmetic Optimization Algorithm (XGB - AOA) achieved the highest accuracy, with R2 values of 0.9962 for the training part and 0.9807 for the testing part. The performance of the developed models was further evaluated using the RMSE, MAE, and VAF indices. The results revealed that the XGBoost model optimized using XGBoost - AOA outperformed other models in terms of accuracy, with RMSE, MAE, and VAF values of 0.0078, 0.0015, and 99.6189 for the training part and 0.0141, 0.0112, and 98.0394 for the testing part, respectively. These findings suggest that XGBoost - AOA is the most accurate model for predicting the pile set-up component.

• Imaging Science in Dentistry
• /
• 제54권1호
• /
• pp.63-69
• /
• 2024

Purpose: The objective of this study was to determine the minimum number of teeth in the anterior dental arch that would yield accurate results for individual identification in forensic contexts. Materials and Methods: The study involved the analysis of 28 sets of 3-dimensional (3D) point cloud data, focused on the labial surface of the anterior teeth. These datasets were superimposed within each group in both genuine and imposter pairs. Group A incorporated data from the right to the left central incisor, group B from the right to the left lateral incisor, and group C from the right to the left canine. A comprehensive analysis was conducted, including the evaluation of root mean square error (RMSE) values and the distances resulting from the superimposition of dental arch segments. All analyses were conducted using CloudCompare version 2.12.4 (Telecom ParisTech and R&D, Kyiv, Ukraine). Results: The distances between genuine pairs in groups A, B, and C displayed an average range of 0.153 to 0.184mm. In contrast, distances for imposter pairs ranged from 0.338 to 0.522 mm. RMSE values for genuine pairs showed an average range of 0.166 to 0.177, whereas those for imposter pairs ranged from 0.424 to 0.638. A statistically significant difference was observed between the distances of genuine and imposter pairs(P<0.05). Conclusion: The exceptional performance observed for the labial surfaces of anterior teeth underscores their potential as a dependable criterion for accurate 3D dental identification. This was achieved by assessing a minimum of 4 teeth.

• 한국수자원학회논문집
• /
• 제53권12호
• /
• pp.1193-1201
• /
• 2020

본 논문에서는 미계측 유역에 적용할 수 있는 갈수지수 산정 회귀모형을 개발하고자 하였다. 30개의 중권역 유역을 대상으로 국가수자원종합관리시스템에서 제공하는 장기유출자료를 이용하여 평균 갈수량과 평균 저수량, 지속기간별 빈도별 갈수지수를 산정하였으며 이를 유역특성인자 18개와 기상특성인자 3개와의 상관 분석을 통하여 최종적으로 유역면적(A), 유역 평균 표고(H), 유역 평균 경사(S), 수계밀도(D), 유출곡선지수(CN), 연증발산량(ET), 연강수량(P)을 선정하여 다중회귀분석을 수행하여 갈수지수 회귀모형을 개발하였다. 개발된 회귀모형을 평가하기 위하여 10개의 검증유역을 미계측 유역으로 간주하여 평균제곱근오차(RMSE) 와 평균절대오차(MAE)를 이용하여 정확도를 추정하였다. 또한 기존의 평균갈수량산정 회귀모형과의 비교를 통하여 본 논문에서 개발한 모형의 우수성을 검토하였다.

• 대한원격탐사학회지
• /
• 제34권2_1호
• /
• pp.213-225
• /
• 2018

본 연구는 우리나라 주변 해역에서 Advanced Scatterometer(ASCAT) 해상풍 격자 자료(Daily Advanced Scatterometer, DASCAT)의 정확성을 평가하고자 우리나라 주변 해양관측부이 자료와 비교 분석을 수행하였다. 뿐만 아니라 European Centre for Medium-Range Weather Forecasts(ECMWF, 이하 ECMWF), National Centers for Environmental Prediction and National Center for Atmospheric Research(NCEP/NCAR, 이하 NCEP), Modern Era Retrospective-analysis for Research and Applications-2(MERRA-2, 이하 MERRA)에서 제공하는 10-m 해상풍 재분석자료에 대한 비교 및 분석이 추가적으로 수행되었다. 그 결과, DASCAT은 전반적으로 실제 풍속(해양관측부이)에 비하여 약 3 m/s의 RMSE를 나타내며 상관 관계는 동서 바람 성분의 경우 전 지역 0.8 이상의 높은 상관성을 보이지만 남북 바람 성분에 대한 상관성은 서해에서 0.7이하로 낮게 나타난다. 실제 풍속이 10 m/s 이하로 불 때 풍속에 대한 가장 높은 정확성을 나타내는 것은 ECMWF이며 DASCAT, MERRA, NCEP 순이다. 하지만 10 m/s 이상의 실제 풍속에서는 DASCAT이 가장 높은 정확성을 나타낸다. 풍향에 따른 오차 특성은 실제 바람이 동서방향으로 불 때 $70^{\circ}$ 이상의 풍향에 대한 오차가 모든 자료에서 발생하며 남북 성분의 바람이 강화될 때 약 $50^{\circ}$ 수준의 오차가 발생한다. 이러한 결과에서 ECMWF가 가장 높은 정확성을 보인다. 풍향에 따른 풍속의 오차 수준은 실제 바람이 부는 방향에 따라 풍속에 대한 정확성 수준이 변화한다. 특히, 서풍 및 남풍 계열의 바람이 불 때 풍속에 대한 RMSE가 큰 자료는 MERRA이지만 동풍 및 북풍 계열의 바람이 불 때는 NCEP이 가장 큰 RMSE를 나타낸다.

• 한국환경과학회지
• /
• 제17권9호
• /
• pp.1039-1052
• /
• 2008

The SWAT model developed by the USDA-Agricultural Research service for the prediction of rainfall run-off, sediment, and chemical yields in a basin was applied to Jeju Island watershed to estimate the amount of runoff. The research outcomes revealed that the estimated amount of runoff for the long term on 2 water-sheds showed fairly good performance by the long-term daily runoff simulation. The watershed of Chunmi river located the eastern region in Jeju Island, after calibrations of direct runoff data of 2 surveys, showed the similar values to the existing watershed average runoff rate as 22% of average direct runoff rate for the applied period. The watershed of Oaedo river located the northern region showed $R^2$ of 0.93, RMSE of 14.92 and ME of 0.70 as the result of calibrations by runoff data in the occurrence of 7 rainfalls.