• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.101-104
• /
• 1995

A acoustic emission (AE) sensor has been used to monitor tool were during milling process. The relation between tool wear and AE RMS (Root mean Square) signal was investigated experimentally. A avaliable monitoring index for monitoring toolwear was newly extracted form AE RMS. And on-line monitoring program was developed. The proposed monitoring system has verified experimentally by roughing end milling titanium alloy with TIN coated HSS tool.

• 한국공작기계학회논문집
• /
• 제12권1호
• /
• pp.92-100
• /
• 2003

Using a quarter car model, an analytic method for performance estimation of a vehicle suspension system with respect to frequency response, RMS response and performance index is presented. From frequency response function, compromization of response performance to the whole frequency range is verified and from RMS response and performance index, sensitivity of ride md handling characteristics are examined. Using a full car model, sweet area(stable ride area) are determined and performance sensitivity is estimated according to the change of feedback gains. In order to esimate the output sensitivity, response we is displayed using a 3-dimensional contour plot. Design data n suggested for optimal design parameter esimation, which maximize the performance of the given suspension system.

• 한방재활의학과학회지
• /
• 제24권1호
• /
• pp.83-92
• /
• 2014

Objectives To evaluate the clinical usefulness between muscle energy techniques (MET) and transcutaneous electrical nerve stimulator (TENS), we performed both on elector spinae muscle of acute low back pain patients. Methods After performing MET and TENS, we compared both in terms of electrical activity. We performed MET or TENS on elector spinae muscle of acute low back pain patients in each group (n=15,15). After performing MET or TENS, we analyzed root mean square (RMS), median edge frequency (MEF) and asymmetry index (AI). Results 1. After performing MET on elector spinae muscle of acute low back pain patients, RMS was significantly decreased compared with before (p<0.005). 2. After performing TENS on elector spinae muscle of acute low back pain patients, RMS was significantly decreased compared with before (p<0.005). 3. After performing MET on elector spinae muscle of acute low back pain patients, asymmetric index was significantly decreased compared with before (p<0.05). Conclusions According to above results, performing MET on elector spinae muscle of acute low back pain patients has effect in terms of RMS and asymmetric index. And performing TENS on elector spinae muscle of acute low back pain patients also has similar effect in terms of RMS but has not in terms of asymmetric index.

• Asian Journal of Atmospheric Environment
• /
• 제5권1호
• /
• pp.8-20
• /
• 2011

Atmospheric visibility is one of the indicators used to evaluate the status of air quality. Based on a conceptual definition of visibility as the maximum distance at which the outline of the selected target can be recognized, an image analysis technique is introduced here and an algorithm is developed for visibility monitoring. Although there are various measurement techniques, ranging from bulk and precise instruments to naked eye observation techniques, each has their own limitations. In this study, a series of image analysis techniques were introduced and examined for in-situ application. An imaging system was built up using a digital camera and was installed on the study sites in Incheon and Seoul separately. Visual range was also monitored by using a dual technology visibility sensor in Incheon and transmissometer in Seoul simultaneously. The Sobel mask filter was applied to detect the edge lines of objects by extracting the high frequency from the digital image. The root mean square (RMS) index of variation among the pixels in the image was substantially correlated with the visual ranges in Incheon and Seoul with correlations of $R^2$=0.88 and $R^2$=0.71, respectively. The regression line equations between the visual range and the RMS index in Incheon and Seoul were VR=$2.36e^{0.46{\times}(RMS)}$ and VR=$3.18e^{0.15{\times}(RMS)}$, respectively. It was also confirmed that the fine particles ($PM_{2.5}$) have more impacts to the impairment of visibility than coarse particles.

• 대한전기학회논문지
• /
• 제45권3호
• /
• pp.341-351
• /
• 1996

The values for the average and rms currents in a three-level PWM inverter are required in order to select the various components such as power semiconductor devices, capacitors and reactors of inverter circuit. And those are very useful for the designing of the heat sink. In this paper, therefore, the simple current equations are proposed for a three-level PWM inverter. Analysis of inverter current waveforms indicate that the average and rms inverter currents are dependent on the load power factor and PWM modulation index (Ma). Error analysis and experiment results verify the effectiveness of the proposed current equations. (author). refs., figs., tabs.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.814-822
• /
• 2012

선박용 SCR 시스템에서 유동 및 혼합특성을 개선하기 위해 상하유도 및 스월 형상의 혼합기가 고려되었다. 본 연구의 목적은 혼합기 구조에 따른 난류강도 및 균일지수(Uniformity Index)를 상세히 분석하여 SCR 성능을 개선하는 것이다. 그 결과, 촉매부 전단에서의 농도균일도는 혼합기를 사용하였을 경우 약 5% 개선됨을 알 수 있었다. 상하유도형 혼합기의 사용에 따라 주위에서 높은 RMS 수치 및 상대난류강도를 보이지만, 하류로 진행하면서 두 값은 감소하는 경향을 보였다. 스월형 혼합기의 경우 유동의 진행에 대해 RMS 수치와 상대난류강도의 감소가 비교적 적고 상대난류강도의 경우 상대적으로 균일한 분포를 보였다. 두 혼합기에서 발생하는 유동특성에 의해 혼합효과 및 혼합거리가 달랐음을 알 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1109-1114
• /
• 2003

In this paper, task control architecture is proposed for a mobile robot with behaviors based on cognition theory to endow the robot intelligence. In the task control architecture, task manager is introduced especially for the management of computational resource. The management is based on classical RMS (Rate Monotonic Strategy), but with online rate modulation strategy. The rate modulation is performed using the value variances of behavior execution for the task. Because the values are based on natively uncertain sensor information, they are modeled using PDF (probability Density Function). As a rate modulation process, the range of the rate modulation is defined firstly by real-time constraints of RMS and discrete control stability of behaviors. With the allowable range, rate modulations are performed considering harmonic bases to maintain utilization bound without decrease. To evaluate the efficiency of the proposed rate modulation strategy, a simulation test is performed to compare the efficiency between the control architecture with the proposed strategy and previous one. A performance index with the formalization of propensity of resource allocation is proposed and utilized for the simulation test. To evaluate the appropriateness of the performance index, the performance index is compared with practical one through a practical simulation test.

• 한국안광학회지
• /
• 제8권2호
• /
• pp.57-63
• /
• 2003

본 연구에서는 안경렌즈의 전면굴절력, 굴절률, 그리고 중심 두께의 변화에 따라 상측정점초점면에 맺는 착락원 직경 변화를 조사하기 위해 Code V와 LOSA 2.0 프로그램을 사용하였으며, 상측정점굴절력이 -4.00D이고 직경이 70 mm인 근시교정용 안경렌즈를 고려하였다. 또한 안경렌즈의 전면 굴절력은 0~10D, 중심 두께는 1.1~2.0mm 그리고 굴절률은 $n_d$ = 1.498, 1.523, 1.586, 1.60인 경우를 각각 고려하였다. 안경렌즈의 전면굴절력이 증가할수록 상측정점초점면에서 맺는 착락원 직경의 크기는 급격하게 증가하였다. 또한 안경렌즈의 굴절률이 증가한 경우에 상측정점초평면에 맺는 착락원 직경의 크기는 감소하였으며, 전면굴절력의 변화에 따른 착락원 직경의 크기 변화는 작았다. 안경렌즈의 중심 두께가 증가할수록 상측정점초평면에 맺는 착락원 직경 크기에는 거의 영향이 없지만 안경렌즈의 가장자리의 두께는 증가하였다. 이러한 결과로부터 구면렌즈의 경우에는 전면굴절력이 작고, 굴절률이 클수록 상측정점초평면에서 더 좋은 결상을 하고 있음을 알 수 있다.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2017-2020
• /
• 2011

Flicker, which is also known as voltage fluctuation, is an electromagnetic phenomenon generated by large scale nonlinear loads, such as arc furnaces and welding machines. Since a severe and continuous flicker can cause to some damages to electrically sensitive loads as well as human's visual irritations, it needs to be appropriately managed by being accurately measured, quantified and assessed. In Korea, an equivalent 10-Hz flicker index, shortly ${\Delta}V10$, is used to determine the permission limit of flicker. This paper presents an efficient calculation of the flicker index by using a half-cycle sliding window and a recursive method, showing a concrete calculating procedure of ${\Delta}V10$ from the viewpoint of signal processing.

• The Journal of Korean Physical Therapy
• /
• 제19권3호
• /
• pp.11-17
• /
• 2007

Purpose: The purpose of this study were to analyze fatigue patterns of the rectus femoris muscle by isometric contraction. Methods: Twenty healthy subjects(10 male, 10 female) participated in this study. Maximal voluntary isometric contraction(MVIC) was measured by the dynamometer. Muscle activity was recorded from the rectus femoris muscle. During the experiment, the subject was seated in the chair. The measured items, median frequency(MDF) and root mean square (RMS), were collected from the surface EMG. All data were analyzed using repeated measures ANOVA. Results: There was significant difference of MVIC between male and female. Endurance time was significant difference by the level of MVIC but no significant in the main effect(sex) and interaction effect. The MDF and fatigue index were significant differences in the interaction effect. The RMS was not significant difference in both of main and interaction effect. The muscle fatigue patterns of female was greater than male after 60% MVIC. Conclusion: This study showed that sex differences of muscle fatigue were started from 60% MVIC.