• The Korean Journal of Nuclear Medicine Technology
• /
• v.22 no.1
• /
• pp.90-97
• /
• 2018

Purpose The lung segment ratio which is obtained through quantitative analyses of lung perfusion scan images is calculated to evaluate the lung function pre and post surgery. In this Study, the planar image production methods by using Q-Metrix (GE Healthcare, USA) program capable of not only quantitative analysis but also computation of the segment ratio after having performed SPECT/CT are comparatively evaluated. Materials and Methods Lung perfusion scan and SPECT/CT were performed on 50 lung cancer patients prior to surgery who visited our hospital from May 1, 2015 to September 13, 2016 by using Discovery 670(GE Healthcare, USA) equipment. AP(Anterior Posterior)method that uses planar image divided the frontal and rear images into three rectangular portions by means of ROI tool while PO(Posterior Oblique)method computed the segment ratio by dividing the right lobe into three parts and the left lobe into two parts on the oblique image. Segment ratio was computed by setting the ROI and VOI in the CT image by using Q-Metrix program and statistically analysis was performed with SPSS Ver. 23. Results Regarding the correlation concordance rate of Q-Metrix and AP methods, RUL(Right upper lobe), RML(Right middle lobe) and RLL(Right lower lobe) were 0.224, 0.035 and 0.447. LUL(Left upper lobe) and LLL(Left lower lobe) were found to be 0.643 and 0.456, respectively. In the PO method, the right lobe were 0.663, 0.623 and 0.702, respectively, while the left lobe were 0.754 and 0.823. When comparison was made by using the Paired sample T-test, Right lobe were $11.6{\pm}4.5$, $26.9{\pm}6.2$ and $17.8{\pm}4.2$, respectively in the AP method. Left lobe were $28.4{\pm}4.8$ and $15.4{\pm}5.6$. The right lobe of PO had values of $17.4{\pm}5.0$, $10.5{\pm}3.6$ and $27.3{\pm}6.0$, while the left lobe had values of $21.6{\pm}4.8$ and $23.1{\pm}6.6$, thereby having statistically significant difference in comparison to the Q-Metrix method for each of the lobes (P<0.05). However, there was no statistically significant difference in Right middle lobe (P>0.05). Conclusion The AP method showed low concordance rate in correlation with the Q-Metrix method. However, PO method displayed high concordance rate overall. although AP method had significant differences in all lobes, there was no significant difference in Right middle lobe of PO method. Therefore, at the time of production of lung perfusion scan results, utilization of Q-Metrix method of SPECT/CT would be useful in computation of accurate resultant values. Moreover, it is deemed possible to expect obtain more practical sectional computation result values by using PO method at the time of planar image acquisition.

• Journal of Chest Surgery
• /
• v.33 no.6
• /
• pp.518-520
• /
• 2000

Epithelial-myoepithelial carcinoma is a rate low-grade malignant salivary neoplasm that usually occurs in the parotid gland but can also arise in minor salivary glands. We report a case of a primary epithelial-myoepithelial carcinoma of the lung neoplasm. The patient was 48-year-old women who presented with dry cough of 1 month duration. A right middle lobe endobronchial lesion was identified bronchoscopically. The bilobectomy of RML & RLL was performed, the pathologic result was epithelial-myoepithelial carcinoma.

• Journal of Chest Surgery
• /
• v.33 no.4
• /
• pp.324-328
• /
• 2000

Multiple primary lung cancer is not common and classified as a synchronous primary lung cancer and a metachronous primary lung cancer. We experienced one case of the triple synchronous primary lung cancer of different cell types. We conducted right pneumonectomy for preoperative diagnosed neuronendocrine tumor of the RUL and adenocarcinoma of the RLL. Pathologic examination revealed the carcinoid tumor of RUL bronchus, the squamous carcinoma of the RML and the adenocarcinoma of the RLL.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2039-2044
• /
• 2009

The PSK carrier signal recovery circuit using multi-layer coupled line was analyzed and designed. The fabricated carrier recovery 6 port element with multi-layer coupled line structure gets the simple architecture. It is possible to implement the carrier signal recovery circuit of the same structure with the multi-layer six port phase correlator of the direct receiver front-end. Based on the analysis of RML carrier recovery circuit using the multi-layer coupled line 6-port phase correlator, the multi-layer coupled line carrier signal recovery structure for multi-mode coherent demodulation was proposed. The fabricated multi-layer coupled line carrier signal recovery circuit for quadrature phase shift-keying shows a good carrier signal characteristic with a constant phase and phase error below ${\pm}3o$.

• Microbiology and Biotechnology Letters
• /
• v.26 no.1
• /
• pp.23-33
• /
• 1998

The entire sequence of a 4,214,810 bp genome of the Bacillus subtilis 168 has been determined by an international project, and the completion has been announced on July 19, 1997. For the sequencing project an international consortium was established and 25 European, 7 Japanese laboratories, 2 biotechnology companies, and our laboratory participated in the project. Within this framework we determined the complete nucleotide sequence of a 53,289 bp fragment upstream of the odhA gene (181 $^{\circ}$) of the B. subtilis 168 chromosome. On the basis of the published DNA sequences of the B. subtilis sspC and odhA genes, we obtained genomic fragments by plasmid rescue and long-range PCR. The sequenced fragment contains 56 putative open reading frames (designated yojA-yolI and 9 known genes (sspC, cge cluster, orfE5, orfRMl and odhA), in which we found many interesting features. In addition, the entire nucleotide sequence of a 53,289 bp region enabled us to revise the current genetic map of this region.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.5
• /
• pp.41-54
• /
• 2024

In this study, we compare and analyze the performance of three inventory management policies for raw material inventory management in a Precast Concrete production plant: Fixed Order Quantity Policy (FOQP), Fixed Order Interval Policy (FOIP), and (s, S) Ordering Policy (sSOP). In order to make more realistic conclusion, we developed and utilized the ARENA simulation model, a performance evaluation tool that considers the variance of raw material demand and supply for the entire production process in a PC production plant using multiple raw materials. For the three policies, reorder point, order quantity, target level, and order interval parameters were initialized by using Economic Order Quantity (EOQ) model and then optimized through OptQuest. As a result of optimization, inventory management costs were reduced by an average of 97.28% compared to the EOQ model that does not consider the variance of demand and supply. After setting three influencing factors, Project Occurrence Cycle (POC), Raw Material Lead-time (RML), and Unit Stock-out Cost (USC), a performance evaluation was conducted for the three policies. As a result of evaluation, the inventory management costs of FOQP and sSOP, which determine order intervals by considering inventory levels by real-time or daily, were 30.6% and 27.9% lower than FOIP with fixed order intervals respectively. In addition, inventory management costs were affected by RML and USC factors excluding POC, but the differences were 2.17% and 2.09% respectively, which were not large due to the optimization of parameters for responding the variance of raw material demand and supply.

• Journal of Chest Surgery
• /
• v.17 no.4
• /
• pp.729-734
• /
• 1984

Bochdalek hernia is a type of congenital diaphragmatic defect in the posterolateral portion of the diaphragm. The defect is usually Lt. sided due to protective effect of liver on right. Sex distribution is male preponderance [2:1] and it is diagnosed during neonate, mostly first 24 hours, due to severe respiratory distress. We experienced a rare case of old aged female patient with congenital Bochdalek hernia on Rt. side which was found incidentally during treatment of spontaneous pneumothorax of Rt. side. 17 year old female patient was admitted to CS department for chest discomfort on right and mild dyspnea with duration of 20 days. Under the diagnosis of spontaneous pneumothorax, Rt. closed thoracostomy and underwater sealed drainage with continuous suction was applied. On follow-up chest x-ray, poorly defined hazy increased density with multiple air-fluid levels in Rt. lower lung field and Lt. subphrenic free air were noted. So, Barium enema was done under the impression of Rt. diaphragmatic hernia, and nearly entire colon proximal to sigmoid was demonstrated in the Rt. hemithorax. Operation was done-for surgical repair of defected diaphragm through Rt. posterolateral thoracotomy. Operative findings were as follows; 1.Hypoplastic Rt. lung, esp. RML & RLL. 2.Nearly entirely intestines were herniated. 3.Diaphragmatic defect was located on posterolateral portion of the diaphragm, about 10x3cm in size with blunt smooth margin. 4.A large bleb on apex of RUL of lung. Herniated intestines were repaired into abdominal cavity manually and defect of diaphragm was repaired with No. I black silk interrupted sutures directly, and bleb was resected. Postoperative courses were uneventful and the patient was discharged with good condition on POD 14th.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.314-322
• /
• 2009

Nowadays, maritime communication systems need high data rate, reliability, and consistency in order to equivalently provide navigating ships with diverse multimedia services as in terrestrial communication systems. For this purpose, we conceptualize and design the maritime network for ships equipped with a multiband communication system which cost-effectively supports multimedia services according to several radiofrequency bands, such as HF, VHF, and satellite frequencies. We also introduce two service scenarios targeted for the maritime network; ship multimedia service (SMS) and real-time maritime logistics location tracking (RML2T). In addition, we specify related works according to three lower network layers (i.e., physical, data-link, and network layers) upon designing the network.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.10
• /
• pp.33-43
• /
• 2018

In this paper, we propose a method to automatically generate the description of an RDF graph structure. The description is expressed in Shape Expression Language (ShEx), which is developed by W3C and provides the syntax for describing the structure of RDF data. The RDF graphs to which this method can be applied are limited to those generated by the direct mapping, which is an algorithm for transforming relational data into RDF by W3C. A relational database consists of its schema including integrity constraints and its instance data. While the instance data can have been published in RDF by some standard methods such as the direct mapping, the translation of the schema has been missing so far. Unlike the users on relational databases, the ones on RDF datasets were forced to write repeated vague SPARQL queries over the datasets to acquire the exact results. This is because the schema for RDF data has not been provided to the users. The ShEx documents generated by our method can be referred as the schema on writing SPARQL queries. They also can validate data on RDF graph update operations with ShEx validators. In other words, they can work as the integrity constraints in relational databases.

• Journal of Information Processing Systems
• /
• v.17 no.2
• /
• pp.337-351
• /
• 2021

Automatically recognizing facial expressions in video sequences is a challenging task because there is little direct correlation between facial features and subjective emotions in video. To overcome the problem, a video facial expression recognition method using spatiotemporal recurrent neural network and feature fusion is proposed. Firstly, the video is preprocessed. Then, the double-layer cascade structure is used to detect a face in a video image. In addition, two deep convolutional neural networks are used to extract the time-domain and airspace facial features in the video. The spatial convolutional neural network is used to extract the spatial information features from each frame of the static expression images in the video. The temporal convolutional neural network is used to extract the dynamic information features from the optical flow information from multiple frames of expression images in the video. A multiplication fusion is performed with the spatiotemporal features learned by the two deep convolutional neural networks. Finally, the fused features are input to the support vector machine to realize the facial expression classification task. The experimental results on cNTERFACE, RML, and AFEW6.0 datasets show that the recognition rates obtained by the proposed method are as high as 88.67%, 70.32%, and 63.84%, respectively. Comparative experiments show that the proposed method obtains higher recognition accuracy than other recently reported methods.