• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.344-348
• /
• 2011

본 연구에서의 낙동강 본류에 설치예정인 N보를 중심으로 수문조건에 따른 흐름특성을 연구하기 위하여 N수위표에서 상류방향으로 약 4km구간을 채택하였다. 분석에서는 수위표 상류 약2.5km지점에 보를 설치하여 수문의 개방도와 수문조건에 따라 보의 상 하류 구간의 수리학적 특성 및 하상변화의 분석을 실시하였다. 그 결과 유속 수심 및 하상변동은 보에서 배수되는 유량과 밀접한 관계가 있다고 판단되며 차후 유황에 따른 수문의 개방도를 적절히 계획 설계하여 보다 안정적인 치수계획을 수립해야 할 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1361-1365
• /
• 2004

오염물질의 유입 유형은 일정한 농도를 가진 오염물질이 일정한 비율로 연속적으로 유입되는 경우와 순간적으로 특정한 농도를 가진 오염물질이 하천으로 유입되는 경우로 나눌 수 있다. 본 연구에서는 오염물질에 대해 댐 방류량을 일시적으로 증가시켜서 희석 및 세척시키는 플러싱(flushing) 효과에 관하여 연구하였다. 실측한 수리인자를 이용하여 적용성이 크다고 발표된 경험식에 의하여 확산계수를 결정하였다. 플러싱에 의한 오염물질의 희석정도 및 확산특성을 파악하기 위해서 RMA-4 모형을 잠실수중보$\~$신곡수중보 구간에 적용하였다. 정체되어있는 경우와 순간적으로 유입되는 경우, 성산대교 부근에서 농도가 1ppm이하로 감소하는 시간을 각 유량별로 분석하였다. 댐 방류량에 의한 플러싱을 시도한 경우에 본류의 오염물질이 지류로 역류하는 범위를 파악할 수 있었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.615-619
• /
• 2010

4대강 살리기 프로젝트 중 하나인 금강 살리기에는 현재 금남보, 금강보, 부여보가 신설 예정이다. 본 연구에서는 금강 살리기 사업 중 부여보에 대하여 계획홍수량인 100년빈도 유량의 흐름 예측을 위한 1 2차원 수치해석과 수리적인 형상을 실제 흐름으로 관찰하기 위한 수리모형실험을 실시하여 부여보의 치수안정성을 검토 및 분석하였다. 본 연구를 위하여 1차원 수치해석은 HEC-RAS모형, 2차원 수치해석은 SMS RMA2 모형을 사용하였다. 수리모형 실험은 부여보 기준 상 하류 3km 구간에 대하여 축척 1/60 정상모형으로 제작하였다. 그 결과 부여보 상 하류구간에서 원활한 흐름특성이 나타났으며, 100년빈도 유량에 대하여 수치해석과 수리모형실험 모두 계획홍수위를 넘지 않는 것으로 나타났다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.3B
• /
• pp.221-230
• /
• 2009

In Korea, many water intake plants are easily affected by effluents of sewage treatment plants because sewage treatment plants are usually located upstream or nearby the plants of the same riverine area. Furthermore, the inflow of harmful contaminants owing to pollutant spills or transportation accidents of vehicles using the roads and bridges intersecting the river causes significant impact on the management of water intake plants. Paldang lake, the main water intake plants in Korea, is especially exposed to various water pollution accidents, because the drainage basin area is significantly large compared to the water surface area of the lake. Therefore it is necessary to predict the possible pollutant spill in advance and consider measurements in case of water pollution. In this study, water quality prediction was performed in Paldang Lake in Korea durig the dry season using two-dimensional numerical models. In order to represent the cases of pollutant accidents, the difference of pollutant transport patterns with varying injection points was analyzed. Numerical simulations for hydrodynamics of water flow and water quality predictions were performed using RMA-2 and RAM4 respectively. As a result of simulation, the difference of pollutant transport with the injection points was analyzed. As a countermeasure against the pollutant accident, the augmentation of the flow rate is proposed. In comparison with the present state, the rapid dilution and flushing effects on the pollutant cloud could be expected with increase of flow rate. Thus, increase of flow rate can be used for operation of water intake plants in case of pollutant spill accidents.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6B
• /
• pp.731-741
• /
• 2008

Previous studies on the numerical simulation at the tidal reach of Han River tend to restrict downstream boundary as Jeon-ryu station due to difficulties in gaining cross section data and tidal elevation values at Yu-do. But, in this study, geometries beyond the confluence of Gok-reung stream and Im-jin River are constructed based on the numerical sea map; tidal elevation at the downstream boundary, Yu-do is estimated by harmonic analysis of In-cheon tide gage station so that hydrodynamic and diffusion behavior have been analyzed. The domain ranging from Shin-gok submerged weir to Yu-do is selected (which is 36.8 km in length). RMA-2 and RAM4 developed by Il Won Seo (2008) are applied to simulate flow and diffusion behavior, respectively. Numerical results of flow characteristic are compared with the measured data at Jeon-ryu station. Simulation is carried out from June 23 to 25 in 2006 on the ground that hydrologic data is satisfactory and tidal difference is huge during that period. The result shows that reverse flow occurs 5 times according to the tidal elevation at Yu-do and the maximum reverse flow is observed up to Jang-hang IC, which is 32.9 km in length. Also analysis is focused on the process of generation and disappearance of reverse flow, the distribution of water surface elevation and velocity along the maximum velocity line, and the transport of nonconservative pollutant. Pollutant injected from Gul-po stream spreads widely across the river; however, the size of BOD cloud entering from Gok-reung stream is relatively small because water depth at the mid and left side becomes deeper and maximum velocity occurs along the right bank so that transverse mixing is completed quickly. Finally, mixing characteristic of horizontal salinity distribution is obtained by estimating the salinity input with analytical solution of 1D advection-dispersion equation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.14-30
• /
• 2015

This paper attempted to analyze the hydraulic effects that the dredging can take as an alternative to reduce possible damages of flooding due to the overflow of river levee in meandering rivers, where riverbed aggradation, seepage and erosion may occur. In order to make a hydraulic analysis in a section of meandering rivers, a two-dimensional hydraulic analysis model, RMA-2, was selected. The GIS was applied to construct two-dimensional finite element grids to consider the hydraulic conditions before and after dredging. The water surface elevations, depths, velocities, and tractive forces were compared before and after the dredging. The difference of water surface elevation between the inside and outside of river was turned out to be the maximum value of 0.58m under the design flood condition. It could be evaluated that the tractive force at the bank decreased about 42 to 67% on average for all the sections. These results could give valuable information that the dredging of the stream channel at the meandering sections decreased the risk of overflow, seepage and erosion of the banks. The methodologies given in this study will contribute to mitigating the flood damages in the surrounding farmlands.

• Journal of Korea Water Resources Association
• /
• v.42 no.4
• /
• pp.319-329
• /
• 2009

Sediment release openings or pipes are installed in the flood control dam constructed to reduce flood damages, which are to allow water and sediments pass through the dam and to prevent flow blockage and sedimentation in the upstream area of the dam. The Hantan River Flood Control Dam (HRFCD) has been projected for flood damage reduction and sediment release openings and ecological passages are considered for the dam design. In this study, sediment deposition due to the construction of HRFCD was analyzed using the HEC-6 model and compared with the state before the dam construction with respect to the conditions of the annual mean daily discharge and annual discharge hydrograph. According to the numerical results, although downstream water levels were changed by the dam structure, the effects of bed changes were not propagated from the dam over 2 km upstream. Also, 2D numerical models of RMA2 and SED2D were used to predict bed changes in the upstream area with and without sediment release openings. Consequently, it is presented that sediment release openings decreased maximum deposition height in the upstream channel of the dam.

• Journal of Wetlands Research
• /
• v.13 no.1
• /
• pp.149-160
• /
• 2011

This study developed a HSI for the creatures in Hongcheon River in order to analyze the conditions proper for habitats. For the index, the investigator identified a total of seven items encompassing hydraulic characteristics such as flow velocity and water depth, and water quality characteristics such as water temperature, BOD, DO, TN, and TP. The subject river was simulated, inspected, and revised with a two-dimensional river model (RMA-2) and water quality model (QUAL2E). Using GIS, the developed index was divided by section by reflecting river characteristics and compared and analyzed with the statistics. The river was divided into a total of 29 reaches by reflecting the basic characteristics and the features of the hydraulic coefficient on the cross-sections of the river. According to the analysis results, the fish scored the highest mean of the overall habitat suitability index of 0.769 at reach 27. Each of the variables had the following mean values: 0.122 m/s for flow velocity, 0.782m for water depth, $14.3^{\circ}C$ for water temperature, 0.68 mg/l for BOD, 10.3 mg/l for DO, 2.4 mg/l for TN, and 0.0121mg/l for TP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.164-164
• /
• 2011

우리나라는 하상의 평균경사가 급하고 하상계수가 크게 나타나며, 소하천에서의 돌발홍수가 빈발하게 일어나 국내 실정에 적합한 하천 해석 기술을 이용한 바람직한 하천 거동해석이 매우 중요하다고 할 수 있다. 홍수 시 하천의 만곡부나 협착부에서의 흐름은 기본적으로 2차원 흐름으로 서 이 경우 하천 흐름의 수위와 유속 분포는 1차원 하천 모형으로 모의할 수 없다. 특히 우리나라와 같이 하천에 하구둑, 보, 기타 하천 구조물이 많은 경우에는 2차원적인 흐름 해석은 경우에 따라 필수적이다. 본 연구에서는 개발모형인 RAM2 모형을 4대강 살리기 사업이 진행되고 있는 실제유역인 낙동강유역에 적용하여 모형의 적용성을 검증을 위해 그 결과를 실측치와 기존의 법용 프로그램인 RMA-2 모형과 비교하여 모형의 적용성을 입증하였다. 또한 보와 교각과 같은 수공구조물의 설치에 따른 하천흐름의 양상을 파악하기 위하여 RAM2 모형을 달성보 구간에 적용하여 보의 설치 전 후에 대하여 모의를 실시함으로써 모형의 적용성을 입증하였다. 본 연구에 적용된 달성보 구간은 낙동강 살리기 22공구 사업구간으로 중심부에 다기능보가 위치하고 있다. 하천 준설 후, 대상구간 내 보를 설치함으로 인하여 보설치 전 후의 대상구간의 상 하류 하도의 홍수위와 유속분포 등 하천흐름의 양상을 검토하였다. 4대강 살리기 사업에 따라 실제하천의 준설 후 구간내의 전체하도 및 주요 시설물 주위의 하천 흐름을 정확하게 재현하기 위하여 요소망을 조밀하게 구성하고, 안정적인 해를 구하기 위하여 사각형과 삼각형의 복합망으로 낙동강하천정비계획의 측량자료와 GIS프로그램과 SMS를 이용하여 수치모형을 위한 2차원 유한요소망을 구성하였다. 본 연구에서는 보설치 전 후의 대상구간의 상 하류의 홍수위 영향과 유속분포 등 하천흐름의 양상을 연구하기 위하여 대상구간에 대하여 100년 빈도, 500년 빈도의 홍수사상에 대하여 모의를 실시하고 결과를 분석하였다. 하천에서의 흐름, 유사, 오염물 해석을 위한 2차원 유한요소모형은 수자원의 지속적 확보기술의 초석이 될 뿐만 아니라, 필요에 따라서는 하천생태계 보존 및 관리를 위해서도 적용될 수 있어, 수생태계 개선과 친수환경 조성에 크게 기여할 수 있겠다. 또한 하천에서의 흐름, 유사, 오염물 해석을 위한 2차원 유한요소모형을 활용하여 적절한 하천개발 및 관리가 이루어질 경우, 하천의 홍수, 갈수, 환경오염에 따른 사회적인 손실을 방지할 수 있을 것이다.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.265-276
• /
• 2007

An understanding of the hydraulic characteristics in the compound channel with vegetation is important in designing stream restorations or managing the floodplain. A laboratory flume of 16 m long and 0.8 m wide was used for analysis of the hydraulic characteristics in the single section channel and the compound channel with artificial vegetation. Slope of experimental channel is 0.5 %. Discharges are ranged from $0.2\;m^3/s\;to\;$0.4\;m^3/s$. The experiments were done by changing water depth ratio, vegetation density and vegetation location. When water depth ratio in the single section channel with vegetation increase up to 3.5, the results showed that the increment of water depth due to vegetation may be ignored in practice. The maximum increment of water depth was measured up to 6 % in the compound channel with vegetation and the range of velocities increment in the low flow channel was from 25 % to 85 % compared with section average velocities. As the vegetation densities increase and water depth ratios decrease, the velocity of the low flow channel increased. The range of roughness coefficients in the vegetated reaches were estimated from 0.055 to 0.14 in the single section channel and from 0.063 to 0.085 in the compound channel using HEC-RAS and RMA-2 model.