• 한국가스학회지
• /
• 제10권2호
• /
• pp.40-46
• /
• 2006

본 논문은 다구찌 실험 설계법을 이용하여 O-링을 장착하는데 필요한 사각 그루브의 최적설계를 위해 FEM으로 최대코시응력과 최대변형률에 대하여 해석하였다. 다구찌 설계방법은 LPG 충전노즐의 내경측에 밀봉을 위해 설치하는 O-링 그루브의 설계변수를 최적화 하는데 대단히 유용하다. FEM과 함께 다구찌 설계기법을 적용하여 계산된 해석결과에 따르면, 최적화 설계치수를 단지 9번의 반복 실험법에 의해 설계변수의 치수를 최적의 조건으로 얻을 수 있다는 측면에서 간편한 최적설계 기술이다. 이것은 다구찌 설계 실험법이 사각형상의 O-링 그루브를 설계하는 간단한 방법으로 대단히 유용하다는 것이다. 다구찌 설계기법에 기초한 해석결과에 의하면, O-링 그루브의 기하학적 형상에 대한 최적치수는 h=2.5mm, d=2.74 mm, c=0.15 mm, w=3.0 mm으로 각각 요약될 수 있다. 본 연구는 공급된 LPG 가스압력이 18 $kg/cm^2$인 상태에서 밀봉성과 안전성을 고려하면 초기압축률은 8.7%로 유지하는 것이 가장 효과적이라는 사실을 제공한다.

• 자원리싸이클링
• /
• 제13권3호
• /
• pp.37-42
• /
• 2004

폴리염화비닐(PVC)을 0∼2M NaOH 수용액 중에서 반응온도 $200∼250^{\circ}C$, 반응시간 0∼5시간으로 수열 처리한 경우 탈염화수소한 PVC 잔류물의 형상과 구조를 조사했다. 잔류물의 형상은 NaOH 농도에 의해 크게 변화하였다. 수중에서는 잔류물이 응집하고, 표면에서는 약 10$mu extrm{m}$이하의 세공이 생성되었다. 또한 잔류물의 내부는 총총한 망상구조로 되어 있었다. 반면에 NaOH 수용액 중에서는 잔류물의 응집이 거의 관찰되지 않았고 비교적 구상이었다. 그리고 $250^{\circ}C$에서 수중과 NaOH 수용액 중에서의 잔류물의 IR Spectrum을 관찰한 결과 C=C 이중결합에 의한 흡수피크 및 방향환의 생성이 나타났다. 폴리염화비닐을 NaOH용액으로 탈염화수소처리시 잔류물에서는 분자 내 및 분자간에서 환화반응 또는 가교반응이 일어나는 것을 알 수가 있었다.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.506-511
• /
• 2006

은은 주조성과 가공성이 뛰어나 장신구 제작에 주된 소재로 채택되어 왔다. 이런 은 소재 자체의 장점을 이용한 전통적인 방법 중 하나인 모꾸메가네는 나뭇결무늬와 같은 자연스러운 금속의 혼합문양을 표현할 수 있어서 부가가치가 높지만 제작 공정이 복잡하고 힘들어서 경제적으로 장신구를 제작하는데 어려움이 있었다. 기존의 모꾸메가네 공정 대신 은과 구리의 융점차를 이용한 변형 주조 방법과 냉간압연으로 구리와 은 두 금속간의 우수한 결합을 유지하면서도 기존의 모꾸메가네와 유사한 표면 장식 효과를 얻을 수 있는 새로운 공정을 제안해 보았다. 직경 3 mm의 구리 그래뉼과 0.5 mm, 1.5 mm 두께의 구리 판재에 순은 용탕을 부어 두 금속간의 확산 접합이 완성된 괴를 만들고, 이후 롤러 압연을 실시하여 두께 1.5 mm의 판재를 만들어서 이를 이용하여 반지 시제품을 제작한 결과, 제안된 공정으로 이종 금속 접합도가 우수하면서 모꾸메가네와 유사한 효과를 성공적으로 낼 수 있었다. 제안된 공정은 기존의 반복된 열간 가공에 의한 복잡한 모꾸메가네 공정에 비해 보다 간단하고 경제적으로 모꾸메가네 효과를 갖는 은 장신구 디자인을 가능하게 함을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제26권4호
• /
• pp.271-274
• /
• 2013

Power Metal Oxide Semiconductor Field Effect Transistor's (MOSFETs) are well known for superior switching speed, and they require very little gate drive power because of the insulated gate. In these respects, power MOSFETs approach the characteristics of an "ideal switch". The main drawback is on-resistance RDS(on) and its strong positive temperature coefficient. While this process has been driven by market place competition with operating parameters determined by products, manufacturing technology innovations that have not necessarily followed such a consistent path have enabled it. This treatise briefly examines metal oxide semiconductor (MOS) device characteristics and elucidates important future issues which semiconductor technologists face as they attempt to continue the rate of progress to the identified terminus of the technology shrink path in about 2020. We could find at the electrical property as variation p base dose. Ultimately, its ON state voltage drop was enhanced also shrink chip size. To obtain an optimized parameter and design, we have simulated over 500 V Field ring using 8 Field rings. Field ring width was $3{\mu}m$ and P base dose was $1e15cm^2$. Also the numerical multiple $2.52cm^2$ was obtained which indicates the doping limit of the original device. We have simulated diffusion condition was split from $1,150^{\circ}C$ to $1,200^{\circ}C$. And then $1,150^{\circ}C$ diffusion time was best condition for break down voltage.

• 생약학회지
• /
• 제37권2호통권145호
• /
• pp.67-73
• /
• 2006

The butanol extracts of Agrimonia pilosa (BAP) induced dose-dependent vascular relaxation of phenylephrine-precontracted aorta, which was abolished by removal of functional endothelium. Pretreatment of the endothelium-intact aortic tissues with $N^G$-nitro-L-arginine methyl ester (L-NAME) and 1H-[1,2,4]-oxadiazole-[$4,3-{\alpha}$]-quinoxalin-1-one(ODQ) inhibited the relaxation induced by BAP. BAP-induced vascular relaxation was also markedly attenuated by addition of verapamiI, while the relaxant effect of BAP was not blocked by indomethacine, glibenclamide, tetraethylammonium (TEA), atropine, or propranolo. In addition, incubation of endothelium-intact aortic rings with BAP increased the vascular production of cGMP. These results suggest that BAP relaxes vascular smooth muscle via endothelium-dependent nitric oxide/cGMP signaling pathway, which may be causally related with L-type $Ca^{2+}$ channels.

• 동의생리병리학회지
• /
• 제27권4호
• /
• pp.437-445
• /
• 2013

This study was investigated to evaluate the vasorelaxant effect of Rubus coreanus(RC) extract on contracted rabbit carotid artery and its mechanism. To study the effect of RC extract on contracted rabbit carotid arterial strips, arterial strips with intact or damaged endothelium were used for experiment using organ bath. The pre-contracted arterial strips with norepinephrine(NE) or potassium chloride(KCl) was treated with various concentrations of an extract of RC(0.01, 0.03, 0.1, 0.3 and 1.0 $mg/m{\ell}$). To determine the mechanisms of RC-induced vasorelaxant, RC extract was infused into contracted arterial rings which had been pretreated by indomethacin(IM), tetraethylammonium chloride(TEA), $N{\omega}$-nitro-L-arginine (L-NNA), methylene blue(MB). And calcium chloride(Ca) 1 mM was infused into precontracted arterial ring induced by NE or KCl after treatment of RC extract in $Ca^{2+}$-free krebs solution. Cytotoxic activity of RC extract on human umbilical vein endothelial cell(HUVEC) was measured by MTT assay, and nitric oxide(NO) prodution was measured by Griess reagent. RC extract revealed significant relaxation on NE-induced arterial contraction, but didn't relax on KCl-induced arterial contraction. RC extract also had an effective relaxation to the intact endothelium arterial ring, but not the damaged endothelium arterial ring. Treatment of IM, TEA, L-NNA, MB reduced the relaxation of RC extract. Pretreatment of RC extract inhibited the contraction by influx of extracellular $Ca^{2+}$ in contracted arterial ring induced by NE, but it didn't work the contraction by influx of extracellular $Ca^{2+}$ in contracted arterial ring induced by KCl in $Ca^{2+}$-free krebs solution. RC extract increased nitric oxide production on HUVEC. This study indicated that the relaxation effect of RC extract on contracted rabbit carotid artery is related with NO-cGMP pathway, EDHF, prostacyclin.

• Tribology and Lubricants
• /
• 제22권4호
• /
• pp.211-217
• /
• 2006

Ring and groove wear may not be a problem in most current automotive engines. However, a small change in ring face and groove geometry can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face, ring groove and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Being based on the calculation of gas flow amount by the theory of piston ring dynamics and gas flow, and the calculation of oil film thickness and friction force by the analysis of piston ring lubrication, the calculation theory of oil amount through top ring gap into combustion chamber will be set. This is estimated as engine oil consumption. Furthermore, the wear theories of ring, groove and cylinder bore are included. Then the each amount of wear is to be obtained. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. Next, the calculated amount of oil consumption and wear are compared with the guideline of each part's wear and oil consumption. So, the timing of part repair and engine life cycle can be predicted in advance without performing engine durability test. The wear data of rings and grooves are obtained from three engines before and after engine durability test. The calculated wear data of each part are turn out to be at the lower bound of aver-aged test values or a little below.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.376-381
• /
• 2019

Surface texturing is widely applied to reduce friction and improve the reliability of machine elements. Despite extensive theoretical studies to date, most research has been limited to parallel thrust bearings, mechanical face seals, piston rings, etc. However, most sliding bearings have a convergent film shape in the sliding direction and the hydrodynamic pressure is mainly generated by the wedge action. The results of surface texturing on inclined slider bearings are largely insufficient. This paper is the first part of a recent study focusing on the effect of the groove position on the lubrication performances of inclined slider bearings. We model a slider bearing with one rectangular groove on a fixed pad and analyze the continuity and Navier-Stokes equations using a commercial computational fluid dynamics (CFD) code, FLUENT. The results show that the film convergence ratio and the groove position have a significant influence on the pressure and velocity distributions. There are groove positions to maximize the supporting load with the film convergence ratio and the groove reduces the frictional force acting on the slider. Therefore, the proper groove position not only improves the load-carrying capacity of the slider bearings but also reduces its frictional loss. The present results apply to various surface-textured sliding bearings and can lead to further studies.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.382-388
• /
• 2019

It is currently well known that surface textures act as lubricant reservoirs, entrap wear debris, and hydrodynamic bearings, which can lead to certain increases in load-carrying capacities. Until recently, the vast majority of research has focused on parallel sliding machine components such as thrust bearings, mechanical face seals, piston rings, etc. However, most sliding bearings have a convergent film shape in the sliding direction and their hydrodynamic pressure is mainly generated by the wedge action. Following the first part of the present study that investigates the effect of groove position on the lubrication performances of inclined slider bearings, this paper focuses on the effects of groove depths and film thicknesses. Using a commercial computational fluid dynamics (CFD) code, FLUENT, the continuity and Navier-Stokes equations are numerically analyzed. The results show that the film thickness and groove depth have a significant influence on the pressure distribution. The maximum pressure occurs at the groove depth where the vortex is found and, as the depth increases, the pressure decreases. There is also a groove depth to maximize the supporting load with the film thickness. The friction force acting on the slider decreases with deeper grooves. Therefore, properly designed groove depths, depending on the operating conditions, can improve the load-carrying capacity of inclined slider bearings as compared to the bearings without a groove.

• Journal of Chest Surgery
• /
• 제25권3호
• /
• pp.220-231
• /
• 1992

We have performed 28 single lung transplantation in mongrel dogs transplanting the left lung exclusively from November 1989 to September 1991, in the department of thoracic surgery of Seoul National University Hospital. In the donor dogs, the main pulmonary artery was divided proximal to its bifurcation, and the left atrium was incised freeing the left veins with a generous atrial cuff. We used cold saline in the first 7 transplantations and Euro-Collins or modified Euro-Collins solution in the remaining 17 transplantations as a lung preservatives. The bronchus was divided at two cartilage rings proximal to the upper lobe bronchus take off. In the recipient procedure, we used a Fogarty catheter as a bronchus block. Left atrial anastomosis was performed first using 5-O prolene and the pulmonary artery was anastomosed using 6-O prolene. The bronchus was anastomosed next with 4-O vicryl interruptedly and covered with a greater omentum which had been prepared previously. All dogs received cyclosporin A and azathioprine as immunosuppressants and were divided into two group. In the 10 Group I dogs, they survived within 6 days, mean survival time was 66.8$\pm$53.4 hours. In remainder 14 Group lI dogs, they survived above 6 days, mean survival time was 9. 5$\pm$5.6 days. The cause of death were as follows: 2 cases of sacrifice, 2 cases of respiratory insufficiency during operation, 2 cases of arrhythmia immediate postoperatively, 2 cases of bleeding, others in Group I, and 6 cases of sacrifice, 4 cases of sepsis, 3 cases of bleeding, others in Group lI. Results of bronchoscopic findings were obstruction above 50% in 12 cases of 16 performance cases within 5th day. Early chest radiologic haziness were showed, and total lung perfusion defect was frequently showed in both group within 7th day. Main autopsy findings were left atrial and pulmonary arterial thrombi and bronchial obstruction The major histologic findings of Group I were pleural exudate, hemorrhagic infarct, pulmonary congestion, and interesting histologic findings of Group II were 3 cases of perivascular or peribronchial lymphocyte infiltration, 3 cases of hemorrhage infarct, 2 cases of interstitial pneumonitis. The structual change of bronchioles, suggesting bronchiolitis obliterans was not observed due to improper preparation of proximal pulmonary tissue and short term survival times.