• 한국재료학회지
• /
• 제1권2호
• /
• pp.93-98
• /
• 1991

The as-grown $YBa_2Cu_3O_{7-x}$ superconducting thin films on MgO(100) substrate have been prepared by a reactive coevaporation method. The superconducting transition temperature, surface morphology and crystalline quality were examined as a function of the substrate temperature ranging from $450^{\circ}C$ to $590^{\circ}C$. From the reflection high energy electron diffraction (RHEED) analysis, it was found the film consisted of almost amorphous phase with a halo pattern deposited at the substrate temperature of $450^{\circ}C$. The film deposited at the substrate temperature of $510^{\circ}C$ consisted of polycrystalline phase, showing a broad ring pattern. On the other hand, for the film deposited at $590^{\circ}C$, RHEED showed spotty pattern indicating that this film consisted of single crystal phase. It has rough film surface due to the surface outgrowth. The surface outgrowth increased as the substrate temperature increased from $510^{\circ}C$ to $590^{\circ}C$. the surface outgrowth may be due to the anisotropic growth rate. The highest transition temperature obtained in this study was $Tc_{zero}$ of 83K with $Tc_{onset}$ of 88K for the film deposited at $590^{\circ}C$ using activated RF oxygen plasma.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.282-283
• /
• 2005

Ion beam assisted deposition(IBAD) technique was used to produce biaxially textured polycrystalline MgO thin films for high critical current YBCO coated conductor. Hastelloy tapes were continuous electropolished with very smooth surface for IBAD-MgO deposition, RMS roughness of Hastelloy tape values below 2 nm and local slope of less than $1^{\circ}$. After the polishing of the tape an amorphous $Y_2O_3$ and $Al_2O_3$ are deposited Biaxially textured MgO was deposited on amorphous layer bye-beam evaporation with a simultaneous bombardment of high energy ions. We had developed the RHEED to measure in-situ biaxial texture of film surface as thin as tens angstrom. And also ex-situ characterization of buffer layers was studied using XRD and SEM. The full-width at half maximum(FWHM) out of plane texture of IBAD-MgO template is $4^{\circ}$.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.275-280
• /
• 2003

Si(III) 표면위에 Gd$_2O_3:Eu^{3+}$ 결정성 형광체 박막을 이온화 집단체 증착방법으로 증착하여 이온선을 주입, 결정을 파괴한 후에 열처리를 통하여 결정구조를 변화시켰다. 초기 생장시의 결정성은 고에너지 전자회절 (RHEED)을 통해 확인하고, X선 회절과 적외선 분광법을 이용하여 시료의 결정구조의 변화를 관측하였다. Near Edge X-ray Absorption Fine Structure (NEXAFS)를 통해 전자구조의 변화를 확인하였다. 이러한 변화들이 발광 특성에 미치는 영향을 Photoluminescence (PL), Cathodoluminescence (CL), 그리고 Vacuum Ultraviolet (VUV) spectrum으로 알아보았다. 본 연구는 결정구조에 의해 변화된 전자구조가 형광체 박막의 발광특성에 미치는 영향을 보고한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권1호
• /
• pp.18-21
• /
• 2007

Highly textured MgO template by ion-beam-assisted deposition(IBAD) was successfully fabricated using a continuous reel-to-reel(R2R) mode. To enlarge the deposition area, the previous IBAD system was modified into the system with 14-pass and five heating zone. Every processing step was carried out using this multi-turn IBAD system. The overall process consists of R2R electropolishing of a hastelloy C276 tape, deposition of $Al_2O_3$ diffusion barrier, $Y_2O_3$ seed layer, IBAD-MgO and homoepi-MgO layer. The IBAD-MgO templates were fabricated using the IBAD system with 216 cm-length deposition zone and 32 cm diameter ion source. The texture of MgO films developed during the IBAD process was monitored by in-situ reflection high energy electron diffraction(RHEED) to optimize the IBAD process. Recently, 100 m long IBAD-MgO tape with in-plane texture of $\Delta{\phi}<10^{\circ}$ was successfully fabricated using the modified IBAD system. In this report, the detailed deposition condition of getting a long length IBAD-MgO template with a good epitaxy is described.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.102.1-102.1
• /
• 2010

고효율 멀티정션박막태양전지의 바텀셀 적용을 목적으로, 반응성CVD(Reactive thermal CVD)기술을 이용, $Si_2H_6+GeF_4$를 원료가스로, 이들이 가진 산화환원반응을 이용하여 400도 이하의 저온에서 Ge 및 Si 기판에 Ge을 에피성장 시켰다. Ge 기판위의 호모에피막의 경우, $2.5{\AA}/sec$의 성장속도와 99%의 Ge조성을 보였고, RHEED 및 HR-XRD를 통한 결정성 평가 결과, 고품질의 Ge 에피막의 성장이 확인되었다. 동일한 성장조건을 Si기판에 헤테로에피성장 시켰을 경우, 4% 격자불일치에 의해 막품질이 저하되는 것을 확인하였다. 이를 개선하기 위하여 저온에서 제작한 버퍼층에 대한 논의를 하고자 한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.115-115
• /
• 2009

Epitaxial ZnO film was grown on Si(111) substrate with oxidazed CrN buffer by plasma-assisted molecular beam epitaxy (PAMBE). The growth and structural properties are investigated. The single crystalline growth was revealed by in-situ RHEED analysis. Crystalline quality of ZnO film grown on oxidized CrN buffer was investigated by the X-ray rocking curves. The FWHMs of (0002) XRCs was $1.379^{\circ}$. This value was smaller than the ZnO film grown directly on (111) Si substrate.

• 한국산업융합학회 논문집
• /
• 제6권3호
• /
• pp.201-205
• /
• 2003

The effects of adsorption and desorption of alkali-metals on Si(111) surface were investigated by using AES and RHEED-system. The adsorption system is a fundamental interest because of its unique electronic properties such as measurement of work function change, adatom-core level shift. It was found that the growth node of K on Si(111) surface was layer by layer growth and the saturation coverage was 2.0ML at room temperature. Superstructure changes on Si(111) surface according to the alkali-metal thickness and substrate temperatures were accurately defined. By applying the isothermal desorption method, the desorption energies of Li/Si(111) and K/Si(111) surfaces was measured. On Li/Si(111) and K/Si(111) surfaces, the desorption energies were 3.07 eV, 2.19 eV respectively.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.97-100
• /
• 2000

Si$_2$Sr$_2$CuO$\sub$x/(Bi(2201)) thin films are fabricated by atomic layer by layer deposition using ion beam sputtering(IBS) method. During the deposition, 10 %-ozone/oxygen mixture gas of typical 5.0 ${\times}$ 10$\^$-5/ Torr is applied with ultraviolet light irradiation for oxidation. XRD and RHEED investigations reveal out that a buffer layer with some different compositions is formed at the early deposition stage of less than 10 units cell and then c-axis oriented Bi(2201) is grown.

• 한국산업융합학회 논문집
• /
• 제5권3호
• /
• pp.209-212
• /
• 2002

The change of surface structures for the deposition of Sn, In on clean Si(111) surface is investigated as a function of surface coverage by RHEED system. For tin submonolayer films $7{\times}7$, ${\sqrt{3}}{\times}{\sqrt{3}}$ structures are observed depending on the coverage and substrate temperature. For indium submonolayer films $7{\times}7$, ${\sqrt{3}}{\times}{\sqrt{3}}$, ${\sqrt{31}}{\times}{\sqrt{31}}$, $1{\times}1$ structures are observed. We find that at substrate temperature of $500^{\circ}C$, ${\sqrt{3}}{\times}{\sqrt{3}}$ structure is formed at tin coverages of 0.2~0.4 ML and at indium coverages of 0.1~0.3 ML, respectively. From the desorption process, the desorption energies of Sn, In in ${\sqrt{3}}{\times}{\sqrt{3}}$ structure is observed to he 3.25 eV, 2.66eV, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.613-616
• /
• 2001

Bi$_2$Sr$_2$CuO$_{x}$ thin films have been fabricated by atomic layer-by-layer deposition using ion beam sputtering(IBS) method. During the deposition, 10 and 90 wt%-ozone/oxygen mixture gas of typical pressure of 1~9$\times$10$^{-5}$ Torr are supplied with ultraviolet light irradiation for oxidation. XRD and RHEED investigations reveal out that a buffer layer with some different compositions is formed at the early deposition stage of less than 10 units cell and then Bi-2201 oriented along the c-axis is grown.n.