• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.136-179
• /
• 1976

Effects of seeding pattern and rate on the yield and some agronomic characters of barley under different cultural conditions were observed at Suweon, Daejeon and Jinju during the barley growing season from 1972 to 1974. Plant height and culm length were increased by dense seeding, shading, heavy fertilization, moving location down to the lower latitude. The tiller number per plant, dry matter weight, leaf number on main stem, percentage of valid tillers, RGR, NAR, and $R_{A}$ were increased by heavy fertilization, sparse seeding, reduced furrow width and drilling likewise the length, width and angle of leaf. The newer cultivar had higher RGR and NAR. The higher yielding cultivars had higher potential for carbohydrate assimilating ability. Straw weight and grain yield were increased by dense seeding, reduced furrow width, drilling, heavier fertilization and moving the location to the south, and then decreased by shading and late seeding. High yield increase by drilling was found in late seeding. The optimum seeding rate for the yield increase were 15l/10a for furrow and 25l/10a for drilling. The spike number type cultivars were favourable for the sparse seeding and the spike weight type cultivars seemed to be suitable to the dense seeding, The repeatability of days to heading due to location and fertilizer level was higher than that of seeding time and seeding method. Repeatability of culm length was extremly high in seeding method and comparatively high in fertilizer level while low in location. The repeatability of yield due to location and seeding methods was comparatively high, but the tendency was different along with different cultivars. Also the repeatability of yield due to the fertilizer level was generally high except cultivar Haganemngi.

• Korean Journal of Plant Resources
• /
• v.21 no.1
• /
• pp.47-51
• /
• 2008

This study was carried out to get the basic data for safflower cultivation according to sowing date by growth analysis for 2 years form 2003 to 2004 at Institute of natural product in Uiseong, G.B.A.R.E.S.. Safflower(Cheongsoo cultivar) was seeded at March 1st, April 1st, May 1st, and July 1st in field. The necessary date for germination was 24 days, when safflower was seeded at March 1st, but it was 8 days which sowed at April 1st and when the seed was sowed at high temperature period, the necessary date for germination was getting short. The necessary date for flowering was the same trend as germination; it took 104 days at March 1st, 79 days at April 1st, 65 days at May 1st, and 58 days at July 1st sowing treatment. The safflower growth was the most vigor when it was sowed at March 1st. T/R(Top/Root) ratio was gently increased during growing season, but when the seed was sowed at July 1 st, it was low compare to sowing at March 1st and April 1st. RGR(Relative growth rate) was the highest during shoot growth stage, but it was rapidly decreased after flowering. CGR(Crop growth rate) was increased at branching stage, and the increasing velocity was slightly decreased just before flowering, and it was increased again at flowering and at this stage, CGR was the highest, and then it did not increased. NAR(Net assimilation rate) was the highest at shoot growth stage during growing season, and was the highest which was sowed at March 1st.

• Journal of Bio-Environment Control
• /
• v.5 no.1
• /
• pp.50-56
• /
• 1996

This experiment was carried out to investigate the effects of new material, bioceramic powder in the nutrient solution(0.02%) and foliar spray(0.2%) on the growth and fruit quality of aeroponically grown tomato(Lycopersicon esculentum MILL. cv. Seokwang). Plant height was lowered, but root growth was increased both treatment of bioceramic powder into the nutrient solution and foliar spray. Cluster growth of tomato plants increased up to 14% over than that of control in the plot of foliar spray with bioceramic powder. Total plant dry weight also increased when bioceramic powder was treated both into the nutrient solution and foliar spray. T/R ratio was reduced by the treatment of bioceramic powder, but NAR and RGR showed the highest in the plot of foliar spray treated with 0.2% bioceramic powder than that of the other plots. Cumulative fruit fresh and dry weight were reduced when bioceramic powder was treated into nutrient solution but foliar spray produced more cumulative fruit fresh and dry weight than that of control. It was shown that treatment of bioceramic powder into the nutrient solution and foliar spray could be improved sugar degree without reducing fruit yields.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.4
• /
• pp.279-283
• /
• 2004

This experiment was carried out at paddy field (commercial silty loam soil) in the southwestern Korea. Pungsannamulkong, a determinate growth habit, was a relatively high yielding and late maturing cultivar, and Han­namkong, a semi determinate growth habit, was a relatively low yielding and early maturing cultivar. Seeds were sowed at two plants and with a planting density of $70{\times}10cm$ on May 26, 2003. Fertilizer was applied prior to planting at a rate of 3.0-3.0-3.4g $(N-P_2O_5-K_2O)\;per\;m^2$ by all basal fertilizations. Experimental design was a randomized complete block with three replications. Seed yield was higher in Pungsannamulkong by 362g per $m^2$ than in Hannamkong of 260g per $m^2$ Also, the number of pod, number of seed, and number of seed per pod were greater in Pungsannamulkong than in Hannamkong. The number of leaves per $m^2$ showed similar with two soybean cultivars up to August 24 but thereafter it decreased in Hannamkong. The leaf area up to August 4 increased in Hannamkong higher than in Pungsannamulkong, but after that time, Pungsannamulkong had greater leaf area than Hannamkong. The shoot and leaf dry matter of two soybean cultivars from June 23 to August 4 were similar but thereafter, Pungsannamulkong had a significantly greater than Hannamkong. Crop growth rate (CGR), relative growth rate (RGR) and net assimilate rate (NAR) for Punsannamulkong were relatively higher than Hannamkong but leaf area ratio (LAR) and specific leaf weight (SLW) showed higher in Hannamkong. Most of leaves distributed in the ranges of 80-90cm and 60-70cm from the soil surface in Punsannamulkong and Hannamkong, respectively. Pods of Punsannamulkong ranged 10-80cm from the soil surface and most of pods were distributed at 40-50cm. Photosynthetic rate at the flowering stage showed a significant difference between cultivars in the upper most leaf position. There was no significant difference of the photosynthetic rate at $7^{tn}$ leaf at the flowering stage, and the uppermost and 7th leaf position at the seed development stage between two soybean cultivars.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.196-207
• /
• 2016

In monsoon climates, persistent shade is a troublesome weather condition with an impact on the growth and yield of corn (Zea mays L.). We imposed 7, 14, 21, and 28 days of consecutive shade (CS) on Gwangpyeongok and P3394 corn hybrids at the beginning of the kernel filling stages. Shade had little impact on leaf area and dry matter accumulation in the stem and leaves. However, dry matter accumulation in the ear was severely reduced by approximately 28% and 53% after 14 and 28 days of CS, respectively. For the components of grain yield, 7 and 14 days of shade did irreparable damage to the number of filled kernels, the kernel number per ear row, and the percent of filled kernels, but did little damage or reversible damage after removal of the shade to the 100-grain weight and the row number per ear. Shade significantly reduced the relative growth rate (RGR) due to a decrease in the net assimilation rate (NAR). These results suggest that source activity limitation by shade during the kernel filling stages leads to the inhibition of sink activity and size. The yield of biomass, ear, and grain logistically declined as the length of CS increased. Probit analysis revealed that the number of days of CS needed to cause 25% and 50% reductions in grain yield were 3.7 and 23.1, respectively. These results suggest that the plant yield loss induced by shade at the beginning of the kernel filling stages is mainly achieved within the first 7 days of consecutive shade.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.365-372
• /
• 2020

This study was conducted to compare the effects of foliar spray and sub-irrigation of the triazole fungicide diniconazole on the regulation of stem elongation and to investigate the stimulation of root system development during the seedling stage. Comparing the two application approaches, there were significant differences in the leaf area, leaf area ratio (LAR), plant height, compactness, fresh shoot and root production, relative growth rate (RGR), and root to shoot ratio (R/S). At the same application concentration, the sub-irrigation showed a better retarding effect on growth than the foliar spray, because the PGR activity of diniconazole in root absorption was higher than that in shoot absorption. For reaching a target of 20% to 30% inhibition rate of stem length, foliar application concentration of diniconazole exceeded 10, however, only approximately 1 was required in the sub-irrigation application. The root system of tomato seedlings responded strongly to diniconazole application. Total root length, root volume, root average diameter, and the number of root tips increased when diniconazole was sub-irrigation application at 1. A reduction in fine roots (diameter range of 0 to 0.3 mm) and an increase in the roots with a diameter range of 0.3 to 0.6 mm was observed, and this may contribute to the increase in average diameter. The increase in root average diameter may be positive because root penetration increases with root diameter. Our results suggested that sub-irrigation maximized the PGR activity of diniconazole to enhance the retarding effect. And it also possible to enhance the tomato seedling root system by diniconazole stimulating with a lower concentration.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.237-243
• /
• 2001

The experiment was conducted to investigate the effect of different mulching materials on the growth and quality of oriental melon in protected cultivation. Soil temperature, plant growth and fruit quality were affected by different mulching materials, clear polyethylene (P.E.) film (control), clear inset between black P.E. film, green P.E. film. and recycled ethylene vinyl acetate (E.V.A.) film. The highest night soil temperature was at 20 cm depth under green P.E. film, but was at 5 cm depth under other materials. Difference of soil temperature as affected by mulching materials decreased with increasing soil depth. Plant height, number of nodes, leaf area index (LAI), crop growth rate (CGR), and relative growth rate (RGR) at 30 days after transplanting were significantly greater in the recycled E.V.A. film treatment than in the other treatments. Fresh weight of weeds growth under the mulching materials was not affected by mulching material at 30 days after transplanting. However, it was the greatest under clear P.E. film mulching at 90 days after transplanting. Harvesting time of recycled E.V.A. film was 2 days earlier than that of clear P.E. film. Difference in fruit weight and length, and soluble solid content were not affected by the mulching materials. Marketable yield was 2,426 kg.10a$^{-1}$ in recycled E.V.A. film treatment, which was 6% greater than in clear P.E. film treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.314-320
• /
• 1984

Effects of phosphorous fertilizer on the growth habit and yield of monoculm and branch types of two leading sesame varieties was investigated. The photosynthetic rate of at each growing stage was high at the flowering stage. The photosynthetic rate of monoculm sesame variety, Pungnyeon was high prior to flowering stage, while the Kwangsan variety, branch type was high after the flowering stage. The level of phosphate were most effective in increasing photosynthesis when standard level of fertilizer was applied in both varieties. Kwangsan variety showed higher photosynthetic rate per unit area, higher NAR, and CGR and higher LAR and RGR at the maximum flowering stage than the Pungnyoeon variety. Those characters attained maximum level when standard levels of phosphorous fertilizer were applied. The protein and oil content of seeds were higher in Kwangsan variety compared with Pungnyeon. However, the carbohydrate of seeds was high for Pungnyeon variety. The highest protein content was attained when standard level of fertilizer were applied. The oil content appeared to increase as the level of applied fertilizer increased. The results suggest that the vegetative growth and seed yields of sesame may be enough with present level of fertilizers. However, higher amount of phosphorous fertilizer may be required to increase the oil content of sesame seeds.

• Korean Journal of Weed Science
• /
• v.14 no.3
• /
• pp.171-175
• /
• 1994

Physiological changes in Eleocharis kuroguwai Ohwi as affected by bensulfuron-methyl {Methyl 2-[[[[[(4, 6-dimethoxy-2-pyrimidinyl)amino]carbonyl]amino] sulfonyl]methyl]benzoate} was determined to relate the characteristics with regrowth behavior. There were no changes in relative growth rate(RGR) during the period of growth cessation after application of bensulfuron-methyl. RGR's of the growth ceseased plants caused at 39 and 51 g/ha began to increase in between 25 and 30 days after application (DAA) and between 30 and 35 DAA, respectively. In untreated plant tuber carbohydrate rapidly decreased right after emergence and almost consumed within 40 days. There was no carbohydrate consumption during the period of growth cessation in bensulfuron-methyl-applied plant, but the content started to rapidly decrease with regrowth. Tuber viability lasted for 30 days in untreated plant, while tubers were viable for 60 and 70 days after application of bensulfuron-methyl at 39 and 51 g/ha, respectively. During the period of growth cessation the plants kept minimum respiration and photosynthesis, but with regrowth respiration and photosynthesis were resumed and rapidly increased.

• Korean Journal of Plant Resources
• /
• v.22 no.1
• /
• pp.5-12
• /
• 2009

Seed priming is a useful technique for rapid and uniform seed germination as well as early seedling establishment. This experiment was conducted to find out the optimum condition for Sorbus alnifolia seed priming with four concentrations of four reagents in germination property and seedling growth performance. The results are summarized as follows: Percent germination (PG) varied 2.67% to 24.67%, and S. alnifolia seeds had the highest PG in the treatment that were primed in 100mM $KNO_3$ solution for 2 days. Mean germination time was the shortest in 200 mM $KNO_3$ solution for 2 days. Seed priming with $KNO_3$ solutions increased germination speed (GS) and germination performance index (GPI) compared with non-primed seeds. Especially seed primed with 100 mM $KNO_3$ solution for 2 days showed the highest GS and GPI. The highest relative growth rate (RGR) and seedling vigor index (SVI) was significantly (p<0.05) different from the control and other treatments, respectively. RGR of height (0.0071) and root collar diameter (0.0141) of seedling from primed seeds were the highest in 400 mM NaCl solution for 2 days. The highest SVI (5.43) was observed in the seedlings from seeds primed in 100 mM $KNO_3$ solution for 2 days. Consequently, the optimum reagent and concentration were $KNO_3$ and 100 mM for the effective germination and seedling growth in S. alnifolia