• Journal of the Korea Safety Management & Science
• /
• v.17 no.2
• /
• pp.129-137
• /
• 2015

This study is in regard to the gas detection system and gas detection method utilizing smart phone. This study includes; 1) the sensor module attached to the smart phone to detect and measure flammable gas or toxic gas; and 2) gas detection APP which is installed inside the smart phone and recognizes the user information and location information automatically by reading RFID tag indicating the user or the location to detect gas through the contact area where RFID and blue tooth reader is installed inside of the above mentioned smart phone, and then measures the combustible gas or toxic gas by operating above mentioned sensor module and obtains the data thus measured, and above mentioned smart phone is characterized by its transmission of the above mentioned user information, location information and measured data which are obtained by above mentioned gas detecting APP to operation server via communication network. With this, reliability for the location detecting gas by the user, the result of the measurement, etc. can be secured. Furthermore, this provides the effect of preventing artificial manipulation at the time of input which is associated with the identification of the user to be measured by utilizing removable sensor module and application or the mistake resulted from wrong input by the user. In addition, by transmitting the measured data from the sensor module carrying out gas detection to operation server, this provides the effect of making it possible to process the data thus collected to a specialized data for combustible gas or toxic gas.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.1-6
• /
• 2007

Wireless Self-Powered Temperature Sensor for UHF Sensor Tags which are basic device for construction of ubiquitous sensor network is proposed. The key parameters of the target specification are resolution of $0.1\;^{\circ}C$ per output bit, below 1.5 V of operating voltage and below 5 uW of power consumption during sensing operation. Temperature sensor circuit consists of PTAT current generator, band gap reference circuit generating both reference voltage and current, Sigma-Delta Converter, and Digital Counter. Simulated maximum resolution was $0.23\;^{\circ}C/bit$ in 11-bit output. The proposed temperature sensor was fabricated by using a 0.25 m CMOS process. The chip area is $0.32\;{\times}\;0.22\;mm$ and the operating frequency is 2 MHz. Measured resolution from fabricated temperature sensor was $4\;^{\circ}C/bit$ in 8-bit output for the temperature range from $10^{\circ}C$ to $80^{\circ}C$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1517-1530
• /
• 2017

Traditional anti-collision algorithms determine slot size of initial frame based on the information of number of collision slots, idle slots, and success slots. Since there is no information about collision at the beginning of tag information collection, traditional anti-collision algorithms can not determine the initial frame size. Considering that performance of anti-collision algorithm is very sensitive to initial slot size traditional anti-collision algorithms need some improvements. In this study two methods are proposed to determine slot size of initial frame efficiently, through which we can improve the performance of dynamic frame slotted aloha algorithm. To verify the performance of proposed algorithms, 2.4GHz RFID system is used. Throughput and delay time are derived through simulation, which is developed using JAVA. We have seen that proposed algorithm improves throughput by 9.6% and delay time by 9.8%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.232-241
• /
• 2017

This paper presents an automated cow-feeding system based on an AGV and screw conveyor for domestic livestock farms, which are becoming larger and more commercialized. The system includes a hopper module for loading pellet-type mixed feed at the top of the system, a transfer module mounted with a screw conveyor to transfer feed from the hopper module to the outlet module, an outlet module composed of belt conveyors, and an electromagnetic guided driving-type AGV. The weight of the loaded feed is measured by a load cell located under the transfer module. The system reads the feed discharge information stored in RFID tags installed in each cowshed cell, and a predetermined amount of feed is discharged while the AGV is moving. A cow-feed test system was constructed to determine the design parameters of the screw conveyor in the transfer module that determine the feeding capacity. These parameters include the screw's outer diameter, the screw shaft outer diameter, and screw pitch. The parameters were applied to the finalized cow-feed system construction. A DSP-based main controller and cow-feeding algorithm for different scenarios were also developed to control the system. Experimental results confirmed that the system could supply a total of 21 kg of feed uniformly at 420 g/s for a cowshed cell which has 7 cows. The driving distance was 5 m and the speed was 0.1 m/s. Thus, the proposed system could be applied to standardized domestic livestock farms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1868-1876
• /
• 2010

In this paper, we design a 256-bit EEPROM IP using only logic process-based devices. We propose EEPROM core circuits, a control gate (CG) and a tunnel gate (TG) driving circuit, to limit the voltages between the devices within 5.5V; and we propose DC-DC converters : VPP (=+4.75V), VNN (-4.75V), and VNNL (=VNN/3) generation circuit. In addition, we propose switching powers, CG_HV, CG_LV, TG_HV, TG_LV, VNNL_CG, VNNL_TG switching circuit, to be supplied for the CG and TG driving circuit. Simulation results under the typical simulation condition show that the power consumptions in the read, erase, and program mode are $12.86{\mu}W$, $22.52{\mu}W$, and $22.58{\mu}W$ respectively. Furthermore, the manufactured test chip operated normally and generated its target voltages of VPP, VNN, and VNNL as 4.69V, -4.74V, and -1.89V.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.349-349
• /
• 2012

산화제를 이용 기상중합법을 통해 합성되는 고전도도 Poly (3,4-Ethylenedioxythiophene)(PEDOT) 박막은 OTFT, RFID tag, 또는 연성 디스플레이 같은 분야에 다양한 응용 가능성을 가지고 있으며 이로 인해 최근에 연구가 활발히 진행되고 있다. PEDOT박막의 전극소재로써 가능성은 박막의 중합 정도와 표면 형상에 크게 좌우된다. 특히, Si-웨이퍼 기판 위에 산화제의 균일한 도포 및 산화제 자체의 높은 산도 ($pH{\leq}2$)에 따른 부반응의 억제는 기상중합법을 이용한 PEDOT박막의 합성에 있어 매우 중요하다. PEDOT의 효율적인 중합과 균일한 성장을 위해 산화제에 DUDO 와 PEG-PPG-PEG를 첨가한 혼합 산화제 용액을 제조 기상중합 방법을 통해 PEDOT박막을 제작하였다. 그 결과 산화제만을 사용하여 제작된 박막에 비해 전도도가 최대 3,660 S/cm로 향상된 PEDOT 박막이 합성되었다. 이러한 결과는 PEG-PPG-PEG가 산화제 용액의 균일 도포를 향상시키고 Base Inhibitor로 작용하는 DUDO는 PEDOT 성장 시 중합속도를 조절하고 부반응을 최소화 하여 효율적인 공액 이중 결합의 생성을 촉진한데 주로 기인한다. 따라서 그로인해 조밀하며 마이크로 스케일의 기공이 최소화된 PEDOT박막의 합성이 가능하였다. PEDOT박막의 특성 평가에는 4-point probe, optical microscopy, Field Emission-Scanning Electron Microscope, 등이 사용되었으며 또한 전도도의 향상 원인을 분석하고자 ATR-IR Spectrophotometer를 이용하여 합성된 박막의 작용기를 분석하였다. 이러한 고전도도의 PEDOT 박막이 OTFT의 전극소재로 사용된다면 OTFT소자의 성능 향상에 크게 기여 할 것으로 기대된다.

• Journal of Digital Convergence
• /
• v.12 no.8
• /
• pp.211-217
• /
• 2014

In this paper, by using geofencing technology to set the area you want to move tourists. Geofence set of tourists in the region enters the smartphone by sending e-mail or SMS alarm to display a detailed map of the area to visit assistance. When you arrive at the destination of the museum exhibits or exhibits to the NFC tag attached to each corresponding to a web server for a detailed description of the exhibits from the get-down. Multimedia content using an existing exhibits described. Media of exhibition space and the interaction between the visitors tour guide system capable was built.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1071-1076
• /
• 2003

In this work, we propose a new framework of robot control for a variety of applications to our unstructured everyday environments. Programming robots can be a very time-consuming process and seems almost impossible for ordinary end users. To cope with this, this work is to provide a software framework for building robot application programs automatically, where we have robots learn how to accomplish a commanded task from the object. An integrated sensing and computing tag is embedded into every single object in the environment. In the robot controller, only the basic software libraries for low-level robot motion control are provided from the robot manufacturer. The main contributions of this work is to develop a server platform that we call Omniscient Server that generates the application programs and send them to the robot controller through the network. The object-related information from the object server merges into robot control software to generate a detailed application program based on the task commands from the human. We have built a test bed and demonstrated that a robot can perform a common household task within the proposed framework.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.461-466
• /
• 2007

There has been a great interest in printing technology as a low cost and mass production method for the application of printed electronics such as printed TFT, solar cell, RFID Tag, printed battery, and so on. In this study, apparatuses of gravure-offset printing are developed for fine line-width/gap printing and examining pattern distortion occurred in gravure-offset printing process. The fine line-width/gap pattern shows that it is possible to make around 20 micro-meter line-width/gap printing patterns. Pattern distortion is modeled, and the amount and shape of the distortion are calculated by using commercial FEM code. The roll-to-roll printing system under development consists of unwinder/rewinder, two printing units, one coating unit, drying units, guiding unit, vision system, and other auxiliary devices. For multi-layer printing, the system is designed to be capable of printing two different materials.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.129-137
• /
• 2010

There are a lot of multimedia functions getting included in mobile devices recently, not only simple audio but visual functions as well, such as video playing, game and web browsing. Such the visual multimedia functions brought the strong requirement for much bigger LCD Display and high resolution. And the brightness of LCD is also one of major requirements and it is required to be more bright. However, LCD brightness is limited to increase because of power consumption. It occupies nearly 30% of the whole system power. This thesis suggests an effective and simple method of adjusting the LCD backlight brightness, considering a characteristic of battery and user pattern.